SY100EPT28LKG-TR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY100EPT28LKG-TR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY100EPT28LKG-TR (MSOP-8)1D_LVPECL2D_LVPECL#3Q_LVPECL4Q_LVPECL#8VCC7Q_LVTTL6D_LVTTL5GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1D_LVPECLI/OMultiplexed I/O & Peripheral Pin D_LVPECL (General)
2D_LVPECL#I/OMultiplexed I/O & Peripheral Pin D_LVPECL# (General)
3Q_LVPECLI/OMultiplexed I/O & Peripheral Pin Q_LVPECL (General)
4Q_LVPECL#I/OMultiplexed I/O & Peripheral Pin Q_LVPECL# (General)
5GNDGNDGround Reference Pin (GND)
6D_LVTTLI/OMultiplexed I/O & Peripheral Pin D_LVTTL (General)
7Q_LVTTLI/OMultiplexed I/O & Peripheral Pin Q_LVTTL (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 D_LVPECL
I/O
Multiplexed I/O & Peripheral Pin D_LVPECL (General)
Design note: Signal terminal D_LVPECL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D_LVPECL. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY100EPT28LKG-TR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY100EPT28LKG-TR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY100EPT28LKG-TR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY100EPT28LKG-TR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY100EPT28LKG-TR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY100EPT28LKG-TR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for SY100 / SY10EL16VEZC / SY10EL16VEZI
P6 · p06_fig01EXACT PACKAGE
SY100EPT28LKG-TR (MSOP-8) — 6 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 hbwhelp@micrel.com or (408) 955-1690 | 8-PIN MSOP (K8-1) | Rev. 01
6 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 [email protected] or (408) 955-1690 | 8-PIN MSOP (K8-1) | Rev. 01
P7 · p07_fig01EXACT PACKAGE
SY100EPT28LKG-TR (MSOP-8) — 7 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 hbwhelp@micrel.com or (408) 955-1690 | 8-PIN SOIC .150" WIDE (Z8-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
7 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 [email protected] or (408) 955-1690 | 8-PIN SOIC .150" WIDE (Z8-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
P1 · p01_fig012038×2808px
SY100EPT28LKG-TR (MSOP-8) — 1 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 hbwhelp@micrel.com or (408) 955-1690 | Pin Function | D_LVTTL Low Voltage TTL Input | Q_LVTTL Low Voltage TTL Output | D_LVPECL Low Voltage Differential PECL Inputs /D_LVPECL w
1 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 [email protected] or (408) 955-1690 | Pin Function | D_LVTTL Low Voltage TTL Input | Q_LVTTL Low Voltage TTL Output | D_LVPECL Low Voltage Differential PECL Inputs /D_LVPECL w
P2 · p02_fig012038×2705px
SY100EPT28LKG-TR (MSOP-8) — 2 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Ordering Information(1) | Package Operating Package Lead Part Number Type Range Marking Finish | SY10EPT28
2 | ECL Pro™ SY10EPT28L SY100EPT28L Micrel, Inc. | M9999-111605 [email protected] or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Ordering Information(1) | Package Operating Package Lead Part Number Type Range Marking Finish | SY10EPT28
P5 · p05_fig012038×2705px
SY100EPT28LKG-TR (MSOP-8) — Figure 1. LVPECL Parallel Termination-Thevenin Equivalent
Figure 1. LVPECL Parallel Termination-Thevenin Equivalent
P5 · p05_fig01P5
SY100EPT28LKG-TR (MSOP-8) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)
P8 · p08_fig01EXACT PACKAGE
SY100EPT28LKG-TR (MSOP-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging. [SOIC-8]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging. [SOIC-8]

Technical Specifications & Part Details (SY100EPT28LKG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY100EPT28LKG-TR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
275MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — SY100 / SY10EL16VEZC / SY10EL16VEZI (20)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY100EPT28LKG-TR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY100EPT28LKG-TR (MSOP-8)?

Manufactured by MICROCHIP, the SY100EPT28LKG-TR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch. Key pins include: 1 (D_LVPECL: Multiplexed I/O & Peripheral Pin D_LVPECL (General)), 2 (D_LVPECL#: Multiplexed I/O & Peripheral Pin D_LVPECL# (General)), 3 (Q_LVPECL: Multiplexed I/O & Peripheral Pin Q_LVPECL (General)), 4 (Q_LVPECL#: Multiplexed I/O & Peripheral Pin Q_LVPECL# (General)), 5 (GND: Ground Reference Pin (GND)), 6 (D_LVTTL: Multiplexed I/O & Peripheral Pin D_LVTTL (General)).

What are the IPC-7351B PCB Footprint dimensions for SY100EPT28LKG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY100EPT28LKG-TR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY100EPT28LKG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY100EPT28LKG-TR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & SY100 / SY10EL16VEZC / SY10EL16VEZI Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1D_LVPECLDigital_IOSignal terminal D_LVPECL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D_LVPECL. Supported peripheral buses: General.
2D_LVPECL#Digital_IOSignal terminal D_LVPECL# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D_LVPECL#. Supported peripheral buses: General.
3Q_LVPECLDigital_IOSignal terminal Q_LVPECL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q_LVPECL. Supported peripheral buses: General.
4Q_LVPECL#Digital_IOSignal terminal Q_LVPECL# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q_LVPECL#. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6D_LVTTLDigital_IOSignal terminal D_LVTTL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D_LVTTL. Supported peripheral buses: General.
7Q_LVTTLDigital_IOSignal terminal Q_LVTTL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q_LVTTL. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).