SY100EL11VZG-TR (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY100EL11VZG-TR

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY100EL11VZG-TR (SOIC-8)1Q02/Q03Q14/Q18VCC7D6/D5VEEGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
2/Q0I/OMultiplexed I/O & Peripheral Pin /Q0 (General)
3Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
4/Q1I/OMultiplexed I/O & Peripheral Pin /Q1 (General)
5VEEI/OMultiplexed I/O & Peripheral Pin VEE (General)
6/DI/OMultiplexed I/O & Peripheral Pin /D (General)
7DI/OMultiplexed I/O & Peripheral Pin D (General)
8VCCPowerPower Supply Input (VCC — 3.0V to 5.5V)
PIN 1 Q0
I/O
Multiplexed I/O & Peripheral Pin Q0 (General)
Design note: Signal terminal Q0 (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY100EL11VZG-TR (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY100EL11VZG-TR (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY100EL11VZG-TR (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY100EL11VZG-TR (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY100EL11VZG-TR (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY100EL11VZG-TR (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for SY100
P1 · p01_fig02EXACT PACKAGE
SY100EL11VZG-TR (SOIC-8) — The differential inputs of the EL11V employ clamping circuitry to maintain stability under open input conditions. If the inputs are left open (pulled to VEE), the Q outputs will go low. | Package Type | SY100EL11V 8-Pin SOIC (Z) | 1 | 2 | 3
The differential inputs of the EL11V employ clamping circuitry to maintain stability under open input conditions. If the inputs are left open (pulled to VEE), the Q outputs will go low. | Package Type | SY100EL11V 8-Pin SOIC (Z) | 1 | 2 | 3
P7 · p07_fig01EXACT PACKAGE
SY100EL11VZG-TR (SOIC-8) — SY100EL11V
SY100EL11V
P8 · p08_fig01EXACT PACKAGE
SY100EL11VZG-TR (SOIC-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P1 · p01_fig01376×200px
SY100EL11VZG-TR (SOIC-8) — 5V/3.3V ECL 1:2 Differential Fanout Buffer
5V/3.3V ECL 1:2 Differential Fanout Buffer
P7 · p07_fig01P7
SY100EL11VZG-TR (SOIC-8) — Datasheet Page 7 (p07_fig01)
Datasheet Page 7 (p07_fig01)
P8 · p08_fig01P8
SY100EL11VZG-TR (SOIC-8) — Datasheet Page 8 (p08_fig01)
Datasheet Page 8 (p08_fig01)

Technical Specifications & Part Details (SY100EL11VZG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY100EL11VZG-TR (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 3.0V to 5.5V supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
622 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY100EL11VZG-TR (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY100EL11VZG-TR (SOIC-8)?

Manufactured by MICROCHIP, the SY100EL11VZG-TR is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 3.0V to 5.5V. Key pins include: 1 (Q0: Multiplexed I/O & Peripheral Pin Q0 (General)), 2 (/Q0: Multiplexed I/O & Peripheral Pin /Q0 (General)), 3 (Q1: Multiplexed I/O & Peripheral Pin Q1 (General)), 4 (/Q1: Multiplexed I/O & Peripheral Pin /Q1 (General)), 5 (VEE: Multiplexed I/O & Peripheral Pin VEE (General)), 6 (/D: Multiplexed I/O & Peripheral Pin /D (General)).

What are the IPC-7351B PCB Footprint dimensions for SY100EL11VZG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY100EL11VZG-TR (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY100EL11VZG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY100EL11VZG-TR (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & SY100 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1Q0Digital_IOSignal terminal Q0 (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
2/Q0Digital_IOSignal terminal /Q0 (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: /Q0. Supported peripheral buses: General.
3Q1Digital_IOSignal terminal Q1 (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
4/Q1Digital_IOSignal terminal /Q1 (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: /Q1. Supported peripheral buses: General.
5VEEDigital_IOSignal terminal VEE (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: VEE. Supported peripheral buses: General.
6/DDigital_IOSignal terminal /D (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: /D. Supported peripheral buses: General.
7DDigital_IOSignal terminal D (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: D. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.0V to 5.5V domain (Max rating: 5.5V).