SY100E111LEJI (PLCC-28(11.5x11.5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY100E111LEJI

MICROCHIPPLCC-28(11.5x11.5) · 28 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY100E111LEJI (PLCC-28(11.5x11.5))1VCC2IN#3VBB4NC5Q8#6Q87Q7#8VCCO9Q710Q6#11Q612Q5#13Q514Q4#28IN27EN#26VEE25Q024Q0#23Q122VCCO21Q1#20Q219Q2#18Q317Q3#16Q415VCCOGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
28272625242322212019181716151413121110987654321E=11.50mm · Pitch e=1.27mmD=11.50mm-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 11.50mm × 11.50mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
2IN#I/OMultiplexed I/O & Peripheral Pin IN# (General)
3VBBI/OMultiplexed I/O & Peripheral Pin VBB (General)
4NCI/OMultiplexed I/O & Peripheral Pin NC (General)
5Q8#I/OMultiplexed I/O & Peripheral Pin Q8# (General)
6Q8I/OMultiplexed I/O & Peripheral Pin Q8 (General)
7Q7#I/OMultiplexed I/O & Peripheral Pin Q7# (General)
8VCCOPowerPower Supply Input (VCCO — 3.3V / 5.0V Standard Logic)
9Q7I/OMultiplexed I/O & Peripheral Pin Q7 (General)
10Q6#I/OMultiplexed I/O & Peripheral Pin Q6# (General)
11Q6I/OMultiplexed I/O & Peripheral Pin Q6 (General)
12Q5#I/OMultiplexed I/O & Peripheral Pin Q5# (General)
13Q5I/OMultiplexed I/O & Peripheral Pin Q5 (General)
14Q4#I/OMultiplexed I/O & Peripheral Pin Q4# (General)
15VCCOPowerPower Supply Input (VCCO — 3.3V / 5.0V Standard Logic)
16Q4I/OMultiplexed I/O & Peripheral Pin Q4 (General)
17Q3#I/OMultiplexed I/O & Peripheral Pin Q3# (General)
18Q3I/OMultiplexed I/O & Peripheral Pin Q3 (General)
19Q2#I/OMultiplexed I/O & Peripheral Pin Q2# (General)
20Q2I/OMultiplexed I/O & Peripheral Pin Q2 (General)
21Q1#I/OMultiplexed I/O & Peripheral Pin Q1# (General)
22VCCOPowerPower Supply Input (VCCO — 3.3V / 5.0V Standard Logic)
23Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
24Q0#I/OMultiplexed I/O & Peripheral Pin Q0# (General)
25Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
26VEEI/OMultiplexed I/O & Peripheral Pin VEE (General)
27EN#I/OMultiplexed I/O & Peripheral Pin EN# (General)
28INI/OMultiplexed I/O & Peripheral Pin IN (General)
PIN 1 VCC
Power
Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)
Design note: Primary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY100E111LEJI (PLCC-28(11.5x11.5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY100E111LEJI (PLCC-28(11.5x11.5)) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY100E111LEJI (PLCC-28(11.5x11.5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY100E111LEJI (PLCC-28(11.5x11.5)) - 4. Package Dimensions (D×E×A)
PLCC-28(11.5x11.5) · 11.50×11.50mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY100E111LEJI (PLCC-28(11.5x11.5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY100E111LEJI (PLCC-28(11.5x11.5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for SY100 / SY10EL16VEZC / SY10EL16VEZI
P7 · p07_fig01EXACT PACKAGE
SY100E111LEJI (PLCC-28(11.5x11.5)) — 7 | Precision Edge® | SY10E111AE/LE SY100E111AE/LE Micrel, Inc. | M9999-030509 hbwhelp@micrel.com or (408) 955-1690 | 28-PIN PLCC (J28-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated.
7 | Precision Edge® | SY10E111AE/LE SY100E111AE/LE Micrel, Inc. | M9999-030509 [email protected] or (408) 955-1690 | 28-PIN PLCC (J28-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated.
P1 · p01_fig012038×2836px
SY100E111LEJI (PLCC-28(11.5x11.5)) — 1 | Precision Edge® | SY10E111AE/LE SY100E111AE/LE Micrel, Inc. | M9999-030509 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | FEATURES | BLOCK DIAGRAM | Rev.: K Amendment: /0 | Rev. Date: March 2009 | Precision Edge is a registered tr
1 | Precision Edge® | SY10E111AE/LE SY100E111AE/LE Micrel, Inc. | M9999-030509 [email protected] or (408) 955-1690 | DESCRIPTION | FEATURES | BLOCK DIAGRAM | Rev.: K Amendment: /0 | Rev. Date: March 2009 | Precision Edge is a registered tr
P1 · p01_fig01P1
SY100E111LEJI (PLCC-28(11.5x11.5)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig012085×2701px
SY100E111LEJI (PLCC-28(11.5x11.5)) — Precision Edge®
Precision Edge®
P6 · p06_fig012038×2701px
SY100E111LEJI (PLCC-28(11.5x11.5)) — Precision Edge®
Precision Edge®
P6 · p06_fig021875×700px
SY100E111LEJI (PLCC-28(11.5x11.5)) — Frequency (MHz)
Frequency (MHz)
P1 · p01_fig03EXACT PACKAGE
SY100E111LEJI (PLCC-28(11.5x11.5)) — SY100EL16V 8-Pin MSOP (K) 8-Pin SOIC (Z) [MSOP-8]
SY100EL16V 8-Pin MSOP (K) 8-Pin SOIC (Z) [MSOP-8]
P8 · p08_fig011665×1760px
SY100E111LEJI (PLCC-28(11.5x11.5)) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging. [MSOP-8]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging. [MSOP-8]

Technical Specifications & Part Details (SY100E111LEJI)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY100E111LEJI (PLCC-28(11.5x11.5)) is a 28-pin standard electronic & interconnect component featuring a 11.50 × 11.50 × 1.15 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
800 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
11.50 × 11.50 × 1.15 mm (A1=0.03 mm)
Package family: LGA (PLCC-28(11.5x11.5))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — SY100 / SY10EL16VEZC / SY10EL16VEZI (20)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PLCC-28(11.5x11.5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
11.50 × 11.50 mm
Height (A) & Pitch (e)IPC-7351B
A=1.15mm · e=1.27mm
Pad Size (W × L)Level B
0.76 × 2.03 mm
Pins / Total PadsTopology
28P / 28Pad (LGA_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PLCC-28(11.5x11.5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY100E111LEJI (PLCC-28(11.5x11.5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY100E111LEJI (PLCC-28(11.5x11.5))?

Manufactured by MICROCHIP, the SY100E111LEJI is housed in a PLCC-28(11.5x11.5) package with 28 pins and a 1.27 mm lead pitch. Key pins include: 1 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 2 (IN#: Multiplexed I/O & Peripheral Pin IN# (General)), 3 (VBB: Multiplexed I/O & Peripheral Pin VBB (General)), 4 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 5 (Q8#: Multiplexed I/O & Peripheral Pin Q8# (General)), 6 (Q8: Multiplexed I/O & Peripheral Pin Q8 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY100E111LEJI?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY100E111LEJI (PLCC-28(11.5x11.5)) has a nominal body envelope of 11.50 × 11.50 mm, pitch e = 1.27 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY100E111LEJI?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY100E111LEJI (MICROCHIP, PLCC-28(11.5x11.5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & SY100 / SY10EL16VEZC / SY10EL16VEZI Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
2IN#Digital_IOSignal terminal IN# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN#. Supported peripheral buses: General.
3VBBDigital_IOSignal terminal VBB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VBB. Supported peripheral buses: General.
4NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
5Q8#Digital_IOSignal terminal Q8# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q8#. Supported peripheral buses: General.
6Q8Digital_IOSignal terminal Q8 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q8. Supported peripheral buses: General.
7Q7#Digital_IOSignal terminal Q7# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q7#. Supported peripheral buses: General.
8VCCOPower_InPrimary positive power supply input (VCCO) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9Q7Digital_IOSignal terminal Q7 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q7. Supported peripheral buses: General.
10Q6#Digital_IOSignal terminal Q6# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q6#. Supported peripheral buses: General.
11Q6Digital_IOSignal terminal Q6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q6. Supported peripheral buses: General.
12Q5#Digital_IOSignal terminal Q5# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q5#. Supported peripheral buses: General.
13Q5Digital_IOSignal terminal Q5 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q5. Supported peripheral buses: General.
14Q4#Digital_IOSignal terminal Q4# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q4#. Supported peripheral buses: General.
15VCCOPower_InPrimary positive power supply input (VCCO) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
16Q4Digital_IOSignal terminal Q4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q4. Supported peripheral buses: General.
17Q3#Digital_IOSignal terminal Q3# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q3#. Supported peripheral buses: General.
18Q3Digital_IOSignal terminal Q3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q3. Supported peripheral buses: General.
19Q2#Digital_IOSignal terminal Q2# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q2#. Supported peripheral buses: General.
20Q2Digital_IOSignal terminal Q2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q2. Supported peripheral buses: General.
21Q1#Digital_IOSignal terminal Q1# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q1#. Supported peripheral buses: General.
22VCCOPower_InPrimary positive power supply input (VCCO) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
23Q1Digital_IOSignal terminal Q1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
24Q0#Digital_IOSignal terminal Q0# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q0#. Supported peripheral buses: General.
25Q0Digital_IOSignal terminal Q0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
26VEEDigital_IOSignal terminal VEE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VEE. Supported peripheral buses: General.
27EN#Digital_IOSignal terminal EN# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: EN#. Supported peripheral buses: General.
28INDigital_IOSignal terminal IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.