EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

EMC1815T-1E/9R

MICROCHIPWDFN-10-EP(2x2.5) · 10 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · EMC1815T-1E/9R (WDFN-10-EP(2x2.5))112DP1/DN23DN1/DP24DP3/DN45DN3/DP410SCL9SDA8ALERT#/THERM7THERM#/ADDR6GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
12345678910E=2.50mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.50mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (10/10)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
11I/OMultiplexed I/O & Peripheral Pin 1 (General)
2DP1/DN2I/OMultiplexed I/O & Peripheral Pin DP1/DN2 (General)
3DN1/DP2I/OMultiplexed I/O & Peripheral Pin DN1/DP2 (General)
4DP3/DN4I/OMultiplexed I/O & Peripheral Pin DP3/DN4 (General)
5DN3/DP4I/OMultiplexed I/O & Peripheral Pin DN3/DP4 (General)
6GNDGNDGround Reference Pin (GND)
7THERM#/ADDRI/OMultiplexed I/O & Peripheral Pin THERM#/ADDR (General)
8ALERT#/THERM2#I/OMultiplexed I/O & Peripheral Pin ALERT#/THERM2# (General)
9SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
10SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
PIN 1 1
I/O
Multiplexed I/O & Peripheral Pin 1 (General)
Design note: 4 (default for CTHRM[2:0])
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 2. Standard Pinout (Top View)
True package pinout (10 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 4. Package Dimensions (D×E×A)
WDFN-10-EP(2x2.5) · 2.50×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (10 Pads)Expand ›
6. Application SchematicSCHEMATIC
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for EMC1815 / EMC1812
P1 · p01_fig01456×280px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Multichannel Low-Voltage Remote Diode Sensor Family
Multichannel Low-Voltage Remote Diode Sensor Family
P2 · p02_fig011764×1271px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Note: *Includes Exposed Thermal Pad (EP). See Section 3. Pin Descriptions.
Note: *Includes Exposed Thermal Pad (EP). See Section 3. Pin Descriptions.
P3 · p03_fig011689×1505px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Functional Block Diagram
Functional Block Diagram
P11 · p11_fig011775×2017px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — 3. Pin Descriptions
3. Pin Descriptions
P11 · p11_fig01P11
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P89 · p89_fig011083×764px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P91 · p91_fig011748×1074px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — 10-Lead Very Thin Plastic Dual Flat, No Lead Package (9R) - 2.5x2.0 mm Body [VDFN]
10-Lead Very Thin Plastic Dual Flat, No Lead Package (9R) - 2.5x2.0 mm Body [VDFN]
P91 · p91_fig01P91
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Datasheet Page 91 (p91_fig01)
Datasheet Page 91 (p91_fig01)
P92 · p92_fig011114×715px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — C
C
P94 · p94_fig011565×815px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — MILLIMETERS
MILLIMETERS
P95 · p95_fig01912×974px
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P95 · p95_fig01P95
EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) — Datasheet Page 95 (p95_fig01)
Datasheet Page 95 (p95_fig01)
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (EMC1815T-1E/9R)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) is a 10-pin standard electronic & interconnect component featuring a 2.00 × 2.50 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.62V to 3.6V supply operation across -20°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.62V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-20°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
400 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.50 × 0.85 mm (A1=0.03 mm)
Package family: DFN (WDFN-10-EP(2x2.5))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol10 auto-grouped pins
OK
IPC-7351B Land Pattern10 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — EMC1815 / EMC1812 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (WDFN-10-EP(2x2.5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.50 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.85 mm
Pins / Total PadsTopology
10P / 10Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
WDFN-10-EP(2x2.5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — EMC1815T-1E/9R (WDFN-10-EP(2x2.5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of EMC1815T-1E/9R (WDFN-10-EP(2x2.5))?

Manufactured by MICROCHIP, the EMC1815T-1E/9R is housed in a WDFN-10-EP(2x2.5) package with 10 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.62V to 3.6V. Key pins include: 1 (1: Multiplexed I/O & Peripheral Pin 1 (General)), 2 (DP1/DN2: Multiplexed I/O & Peripheral Pin DP1/DN2 (General)), 3 (DN1/DP2: Multiplexed I/O & Peripheral Pin DN1/DP2 (General)), 4 (DP3/DN4: Multiplexed I/O & Peripheral Pin DP3/DN4 (General)), 5 (DN3/DP4: Multiplexed I/O & Peripheral Pin DN3/DP4 (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for EMC1815T-1E/9R?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), EMC1815T-1E/9R (WDFN-10-EP(2x2.5)) has a nominal body envelope of 2.50 × 2.00 mm, pitch e = 0.50 mm, and 10 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for EMC1815T-1E/9R?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for EMC1815T-1E/9R (MICROCHIP, WDFN-10-EP(2x2.5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (10 pins) & EMC1815 / EMC1812 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
11Digital_IOSignal terminal 1 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
2DP1/DN2Digital_IOSignal terminal DP1/DN2 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DP1/DN2. Supported peripheral buses: General.
3DN1/DP2Digital_IOSignal terminal DN1/DP2 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DN1/DP2. Supported peripheral buses: General.
4DP3/DN4Digital_IOSignal terminal DP3/DN4 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DP3/DN4. Supported peripheral buses: General.
5DN3/DP4Digital_IOSignal terminal DN3/DP4 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DN3/DP4. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7THERM#/ADDRDigital_IOSignal terminal THERM#/ADDR (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: THERM#/ADDR. Supported peripheral buses: General.
8ALERT#/THERM2#Digital_IOSignal terminal ALERT#/THERM2# (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: ALERT#/THERM2#. Supported peripheral buses: General.
9SDADigital_IOSignal terminal SDA (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
10SCLDigital_IOSignal terminal SCL (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.