EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

EMC1812T-1E/RW

MICROCHIPWDFN-8-EP(2x2) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · EMC1812T-1E/RW (WDFN-8-EP(2x2))112DP3DN4THERM#/ADDR5GND9EP8SCL7SDA6ALERT#/THERMGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
11I/OMultiplexed I/O & Peripheral Pin 1 (General)
2DPI/OMultiplexed I/O & Peripheral Pin DP (General)
3DNI/OMultiplexed I/O & Peripheral Pin DN (General)
4THERM#/ADDRI/OMultiplexed I/O & Peripheral Pin THERM#/ADDR (General)
5GNDGNDGround Reference Pin (GND)
6ALERT#/THERM2#I/OMultiplexed I/O & Peripheral Pin ALERT#/THERM2# (General)
7SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
8SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 1
I/O
Multiplexed I/O & Peripheral Pin 1 (General)
Design note: 4 (default for CTHRM[2:0])
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 4. Package Dimensions (D×E×A)
WDFN-8-EP(2x2) · 2.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
EMC1812T-1E/RW (WDFN-8-EP(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for EMC1812
P1 · p01_fig01456×280px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Multichannel Low-Voltage Remote Diode Sensor Family
Multichannel Low-Voltage Remote Diode Sensor Family
P2 · p02_fig011764×1271px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Note: *Includes Exposed Thermal Pad (EP). See Section 3. Pin Descriptions.
Note: *Includes Exposed Thermal Pad (EP). See Section 3. Pin Descriptions.
P3 · p03_fig011689×1505px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Functional Block Diagram
Functional Block Diagram
P11 · p11_fig011775×2017px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — 3. Pin Descriptions
3. Pin Descriptions
P11 · p11_fig01P11
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P87 · p87_fig011652×2030px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — 8-Lead Very, Very Thin Plastic Dual Flat, No Lead Package (RW) - 2x2 mm Body [WDFN]
8-Lead Very, Very Thin Plastic Dual Flat, No Lead Package (RW) - 2x2 mm Body [WDFN]
P87 · p87_fig01P87
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Datasheet Page 87 (p87_fig01)
Datasheet Page 87 (p87_fig01)
P88 · p88_fig011652×973px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — 8-Lead Very, Very Thin Plastic Dual Flat, No Lead Package (RW) - 2x2 mm Body [WDFN]
8-Lead Very, Very Thin Plastic Dual Flat, No Lead Package (RW) - 2x2 mm Body [WDFN]
P89 · p89_fig011083×764px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P89 · p89_fig01P89
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — Datasheet Page 89 (p89_fig01)
Datasheet Page 89 (p89_fig01)
P92 · p92_fig011114×715px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — C
C
P95 · p95_fig01912×974px
EMC1812T-1E/RW (WDFN-8-EP(2x2)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN

Technical Specifications & Part Details (EMC1812T-1E/RW)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:EMC1812T-1E/RW (WDFN-8-EP(2x2)) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.62V to 3.6V supply operation across -20°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.62V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-20°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
400 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (WDFN-8-EP(2x2))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.70×0.90mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (WDFN-8-EP(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.45 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
WDFN-8-EP(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — EMC1812T-1E/RW (WDFN-8-EP(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of EMC1812T-1E/RW (WDFN-8-EP(2x2))?

Manufactured by MICROCHIP, the EMC1812T-1E/RW is housed in a WDFN-8-EP(2x2) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.62V to 3.6V. Key pins include: 1 (1: Multiplexed I/O & Peripheral Pin 1 (General)), 2 (DP: Multiplexed I/O & Peripheral Pin DP (General)), 3 (DN: Multiplexed I/O & Peripheral Pin DN (General)), 4 (THERM#/ADDR: Multiplexed I/O & Peripheral Pin THERM#/ADDR (General)), 5 (GND: Ground Reference Pin (GND)), 6 (ALERT#/THERM2#: Multiplexed I/O & Peripheral Pin ALERT#/THERM2# (General)).

What are the IPC-7351B PCB Footprint dimensions for EMC1812T-1E/RW?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), EMC1812T-1E/RW (WDFN-8-EP(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.70 × 0.90 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for EMC1812T-1E/RW?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for EMC1812T-1E/RW (MICROCHIP, WDFN-8-EP(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & EMC1812 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
11Digital_IOSignal terminal 1 (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
2DPDigital_IOSignal terminal DP (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DP. Supported peripheral buses: General.
3DNDigital_IOSignal terminal DN (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: DN. Supported peripheral buses: General.
4THERM#/ADDRDigital_IOSignal terminal THERM#/ADDR (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: THERM#/ADDR. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6ALERT#/THERM2#Digital_IOSignal terminal ALERT#/THERM2# (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: ALERT#/THERM2#. Supported peripheral buses: General.
7SDADigital_IOSignal terminal SDA (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
8SCLDigital_IOSignal terminal SCL (I/O, 1.62V to 3.6V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.