PIC18F23K20-E/SO (SOIC-28-300mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18F23K20-E/SO

MICROCHIPSOIC-28-300mil · 28 Pins · Pitch 1.27mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18F23K20-E/SO (SOIC-28-300mil)1MCLR#/VPP/RE2AN0/C12IN0-/3AN1/C12IN1-/4NC5AN3/VREF+/C16T0CKI/C1OUT/7NC8VSS9OSC1/CLKIN/R10OSC2/CLKOUT/11T1OSO/T13CKI12T1OSI/CCP2/R13CCP1/P1A/RC214SCK/SCL/RC328RB7/KBI3/PGD27RB6//KBI2/PG26RB5/KBI1/PGM25RB4/KBI0/AN124RB3/AN9/C12I23RB2/INT2/AN822IO1121RB0/INT0/FLT20VDD19VSS18RC7/RX/DT17RC6/TX/CK16RC5/SDO15RC4/SDI/SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
12345678910111213141516171819202122232425262728E=7.50mm · Pitch e=1.27mmD=17.90mm-10-8-6-4-20246810131197531-1-3-5-7-9-11-13mm
3. 3D CAD MODEL
Package Body: 7.50mm × 17.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1MCLR#/VPP/RE3I/OMultiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)
2AN0/C12IN0-/RA0I/OMultiplexed I/O & Peripheral Pin AN0/C12IN0-/RA0 (General)
3AN1/C12IN1-/RA1I/OMultiplexed I/O & Peripheral Pin AN1/C12IN1-/RA1 (General)
4NCNCNo Connect (Leave Floating)
5AN3/VREF+/C1IN+/RA3AnalogMultiplexed I/O & Peripheral Pin AN3/VREF+/C1IN+/RA3 (General)
6T0CKI/C1OUT/RA4I/OMultiplexed I/O & Peripheral Pin T0CKI/C1OUT/RA4 (General)
7NCNCNo Connect (Leave Floating)
8VSSGNDGround Reference Pin (VSS)
9OSC1/CLKIN/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKIN/RA7 (RTC/CLK)
10OSC2/CLKOUT/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKOUT/RA6 (RTC/CLK)
11T1OSO/T13CKI/RC0I/OMultiplexed I/O & Peripheral Pin T1OSO/T13CKI/RC0 (General)
12T1OSI/CCP2/RC1I/OMultiplexed I/O & Peripheral Pin T1OSI/CCP2/RC1 (General)
13CCP1/P1A/RC2I/OMultiplexed I/O & Peripheral Pin CCP1/P1A/RC2 (General)
14SCK/SCL/RC3I/OMultiplexed I/O & Peripheral Pin SCK/SCL/RC3 (SPI, I2C)
15RC4/SDI/SDAI/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
16RC5/SDOI/OMultiplexed I/O & Peripheral Pin RC5/SDO (General)
17RC6/TX/CKI/OMultiplexed I/O & Peripheral Pin RC6/TX/CK (General)
18RC7/RX/DTI/OMultiplexed I/O & Peripheral Pin RC7/RX/DT (General)
19VSSGNDGround Reference Pin (VSS)
20VDDPowerPower Supply Input (VDD — 1.8V to 3.6V)
21RB0/INT0/FLT0/AN12I/OMultiplexed I/O & Peripheral Pin RB0/INT0/FLT0/AN12 (General)
22IO11I/OGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23RB2/INT2/AN8/P1BI/OMultiplexed I/O & Peripheral Pin RB2/INT2/AN8/P1B (General)
24RB3/AN9/C12IN2-/CCP2I/OMultiplexed I/O & Peripheral Pin RB3/AN9/C12IN2-/CCP2 (General)
25RB4/KBI0/AN11/P1DI/OMultiplexed I/O & Peripheral Pin RB4/KBI0/AN11/P1D (General)
26RB5/KBI1/PGMI/OMultiplexed I/O & Peripheral Pin RB5/KBI1/PGM (General)
27RB6//KBI2/PGCI/OMultiplexed I/O & Peripheral Pin RB6//KBI2/PGC (General)
28RB7/KBI3/PGDI/OMultiplexed I/O & Peripheral Pin RB7/KBI3/PGD (General)
PIN 1 MCLR#/VPP/RE3
I/O
Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)
Design note: Signal terminal MCLR#/VPP/RE3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18F23K20-E/SO (SOIC-28-300mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18F23K20-E/SO (SOIC-28-300mil) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18F23K20-E/SO (SOIC-28-300mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18F23K20-E/SO (SOIC-28-300mil) - 4. Package Dimensions (D×E×A)
SOIC-28-300mil · 7.50×17.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18F23K20-E/SO (SOIC-28-300mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18F23K20-E/SO (SOIC-28-300mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for PIC18F23K20 / PIC18F45K20T / PIC18F24K20
P1 · p01_fig01377×200px
PIC18F23K20-E/SO (SOIC-28-300mil) — 28/40/44-Pin Flash Microcontrollers
28/40/44-Pin Flash Microcontrollers
P138 · p138_fig011537×942px
PIC18F23K20-E/SO (SOIC-28-300mil) — FIGURE 11-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 11-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P163 · p163_fig011558×987px
PIC18F23K20-E/SO (SOIC-28-300mil) — FIGURE 16-1: EXAMPLE SIMPLIFIED BLOCK DIAGRAM OF THE ENHANCED PWM MODE Duty Cycle Registers DC1B<1:0>
FIGURE 16-1: EXAMPLE SIMPLIFIED BLOCK DIAGRAM OF THE ENHANCED PWM MODE Duty Cycle Registers DC1B<1:0>
P184 · p184_fig011777×937px
PIC18F23K20-E/SO (SOIC-28-300mil) — FIGURE 17-2: SPI MASTER/SLAVE CONNECTION
FIGURE 17-2: SPI MASTER/SLAVE CONNECTION
P410 · p410_fig011777×2564px
PIC18F23K20-E/SO (SOIC-28-300mil) — PIC18F2XK20/4XK20
PIC18F2XK20/4XK20
P433 · p433_fig011777×2514px
PIC18F23K20-E/SO (SOIC-28-300mil) — PIC18F2XK20/4XK20
PIC18F2XK20/4XK20
P433 · p433_fig01P433
PIC18F23K20-E/SO (SOIC-28-300mil) — Datasheet Page 433 (p433_fig01)
Datasheet Page 433 (p433_fig01)
P434 · p434_fig01All Packages in PDF
PIC18F23K20-E/SO (SOIC-28-300mil) — PIC18F2XK20/4XK20
PIC18F2XK20/4XK20

Technical Specifications & Part Details (PIC18F23K20-E/SO)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18F23K20-E/SO (SOIC-28-300mil) is a 28-pin standard electronic & interconnect component featuring a 17.90 × 7.50 × 2.70 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
16 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
17.90 × 7.50 × 2.70 mm (A1=0.20 mm)
Package family: SOIC (SOIC-28-300mil)
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18F23K20 / PIC18F45K20T / PIC18F24K20 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOIC-28-300mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
17.90 × 7.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.70mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.90 mm
Pins / Total PadsTopology
28P / 28Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-28-300mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18F23K20-E/SO (SOIC-28-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18F23K20-E/SO (SOIC-28-300mil)?

Manufactured by MICROCHIP, the PIC18F23K20-E/SO is housed in a SOIC-28-300mil package with 28 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (MCLR#/VPP/RE3: Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)), 2 (AN0/C12IN0-/RA0: Multiplexed I/O & Peripheral Pin AN0/C12IN0-/RA0 (General)), 3 (AN1/C12IN1-/RA1: Multiplexed I/O & Peripheral Pin AN1/C12IN1-/RA1 (General)), 4 (NC: No Connect (Leave Floating)), 5 (AN3/VREF+/C1IN+/RA3: Multiplexed I/O & Peripheral Pin AN3/VREF+/C1IN+/RA3 (General)), 6 (T0CKI/C1OUT/RA4: Multiplexed I/O & Peripheral Pin T0CKI/C1OUT/RA4 (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC18F23K20-E/SO?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18F23K20-E/SO (SOIC-28-300mil) has a nominal body envelope of 7.50 × 17.90 mm, pitch e = 1.27 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18F23K20-E/SO?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18F23K20-E/SO (MICROCHIP, SOIC-28-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & PIC18F23K20 / PIC18F45K20T / PIC18F24K20 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1MCLR#/VPP/RE3Digital_IOSignal terminal MCLR#/VPP/RE3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.
2AN0/C12IN0-/RA0Digital_IOSignal terminal AN0/C12IN0-/RA0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: AN0/C12IN0-/RA0. Supported peripheral buses: General.
3AN1/C12IN1-/RA1Digital_IOSignal terminal AN1/C12IN1-/RA1 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: AN1/C12IN1-/RA1. Supported peripheral buses: General.
4NCNo_ConnectNo Connect (Leave Floating)
5AN3/VREF+/C1IN+/RA3AnalogSignal terminal AN3/VREF+/C1IN+/RA3 (Analog, 1.8V to 3.6V domain). Multiplexed alternate functions: AN3/VREF+/C1IN+/RA3. Supported peripheral buses: General.
6T0CKI/C1OUT/RA4Digital_IOSignal terminal T0CKI/C1OUT/RA4 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: T0CKI/C1OUT/RA4. Supported peripheral buses: General.
7NCNo_ConnectNo Connect (Leave Floating)
8VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
9OSC1/CLKIN/RA7Digital_IOSignal terminal OSC1/CLKIN/RA7 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKIN/RA7. Supported peripheral buses: RTC/CLK.
10OSC2/CLKOUT/RA6Digital_IOSignal terminal OSC2/CLKOUT/RA6 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKOUT/RA6. Supported peripheral buses: RTC/CLK.
11T1OSO/T13CKI/RC0Digital_IOSignal terminal T1OSO/T13CKI/RC0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: T1OSO/T13CKI/RC0. Supported peripheral buses: General.
12T1OSI/CCP2/RC1Digital_IOSignal terminal T1OSI/CCP2/RC1 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: T1OSI/CCP2/RC1. Supported peripheral buses: General.
13CCP1/P1A/RC2Digital_IOSignal terminal CCP1/P1A/RC2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: CCP1/P1A/RC2. Supported peripheral buses: General.
14SCK/SCL/RC3Digital_IOSignal terminal SCK/SCL/RC3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SCK/SCL/RC3. Supported peripheral buses: SPI, I2C.
15RC4/SDI/SDADigital_IOSignal terminal RC4/SDI/SDA (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
16RC5/SDODigital_IOSignal terminal RC5/SDO (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
17RC6/TX/CKDigital_IOSignal terminal RC6/TX/CK (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
18RC7/RX/DTDigital_IOSignal terminal RC7/RX/DT (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
19VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
20VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 3.6V domain (Max rating: 3.6V).
21RB0/INT0/FLT0/AN12Digital_IOSignal terminal RB0/INT0/FLT0/AN12 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB0/INT0/FLT0/AN12. Supported peripheral buses: General.
22IO11Digital_IOGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23RB2/INT2/AN8/P1BDigital_IOSignal terminal RB2/INT2/AN8/P1B (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB2/INT2/AN8/P1B. Supported peripheral buses: General.
24RB3/AN9/C12IN2-/CCP2Digital_IOSignal terminal RB3/AN9/C12IN2-/CCP2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB3/AN9/C12IN2-/CCP2. Supported peripheral buses: General.
25RB4/KBI0/AN11/P1DDigital_IOSignal terminal RB4/KBI0/AN11/P1D (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB4/KBI0/AN11/P1D. Supported peripheral buses: General.
26RB5/KBI1/PGMDigital_IOSignal terminal RB5/KBI1/PGM (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB5/KBI1/PGM. Supported peripheral buses: General.
27RB6//KBI2/PGCDigital_IOSignal terminal RB6//KBI2/PGC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB6//KBI2/PGC. Supported peripheral buses: General.
28RB7/KBI3/PGDDigital_IOSignal terminal RB7/KBI3/PGD (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB7/KBI3/PGD. Supported peripheral buses: General.