PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC24HJ64GP504-E/ML

MICROCHIPQFN-44-EP(8x8) · 45 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC24HJ64GP504-E/ML (QFN-44-EP(8x8))1SDA1/RP9/CN22RP22/CN18/PM3RP23/CN17/PM4RP24/CN20/PM5RP25/CN19/PM6VSS7VCAP8IO09IO410IO511IO612TMS/PMA10/RA13TCK/PMA7/RA714IO1615IO1716AVSS17AVDD18MCLR#19AN0/VREF+/CN20AN1/VREF-/CN21IO1022IO1123AN4/C1IN-/RP45EP44SCL1/RP8/CN243INT0/RP7/CN242IO4241IO4140VDD39VSS38RP21/CN26/PM37RP20/CN25/PM36RP19/CN28/PM35TDI/PMA9/RA934SOSCO/T1CK/C33SOSCI/RP4(1)32TDO/PMA8/RA831OSC2/CLKO/CN30OSC1/CLKI/CN29VSS28VDD27IO4726AN7/RP17/CN925AN6/RP16/CN824AN5/C1IN+/RPGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.835.630.525.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4-30.5-35.6mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233343536373839404142434445E=8.00mm · Pitch e=0.65mmD=8.00mm-6-5-4-3-2-101234566543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 8.00mm × 8.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (45/45)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SDA1/RP9/CN21/PMD3/RB9I/OMultiplexed I/O & Peripheral Pin SDA1/RP9/CN21/PMD3/RB9 (I2C)
2RP22/CN18/PMA1/RC6I/OMultiplexed I/O & Peripheral Pin RP22/CN18/PMA1/RC6 (General)
3RP23/CN17/PMA0/RC7I/OMultiplexed I/O & Peripheral Pin RP23/CN17/PMA0/RC7 (General)
4RP24/CN20/PMA5/RC8I/OMultiplexed I/O & Peripheral Pin RP24/CN20/PMA5/RC8 (General)
5RP25/CN19/PMA6/RC9I/OMultiplexed I/O & Peripheral Pin RP25/CN19/PMA6/RC9 (General)
6VSSGNDGround Reference Pin (VSS)
7VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12TMS/PMA10/RA10I/OMultiplexed I/O & Peripheral Pin TMS/PMA10/RA10 (General)
13TCK/PMA7/RA7I/OMultiplexed I/O & Peripheral Pin TCK/PMA7/RA7 (General)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16AVSSGNDGround Reference Pin (AVSS)
17AVDDPowerPower Supply Input (AVDD — 3.0V to 3.6V)
18MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
19AN0/VREF+/CN2/RA0AnalogMultiplexed I/O & Peripheral Pin AN0/VREF+/CN2/RA0 (General)
20AN1/VREF-/CN3/RA1AnalogMultiplexed I/O & Peripheral Pin AN1/VREF-/CN3/RA1 (General)
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22IO11I/OGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23AN4/C1IN-/RP2/CN6/RB2I/OMultiplexed I/O & Peripheral Pin AN4/C1IN-/RP2/CN6/RB2 (General)
24AN5/C1IN+/RP3/CN7/RB3I/OMultiplexed I/O & Peripheral Pin AN5/C1IN+/RP3/CN7/RB3 (General)
25AN6/RP16/CN8/RC0I/OMultiplexed I/O & Peripheral Pin AN6/RP16/CN8/RC0 (General)
26AN7/RP17/CN9/RC1I/OMultiplexed I/O & Peripheral Pin AN7/RP17/CN9/RC1 (General)
27IO47I/OGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
29VSSGNDGround Reference Pin (VSS)
30OSC1/CLKI/CN30/RA2I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/CN30/RA2 (RTC/CLK)
31OSC2/CLKO/CN29/RA3I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/CN29/RA3 (RTC/CLK)
32TDO/PMA8/RA8I/OMultiplexed I/O & Peripheral Pin TDO/PMA8/RA8 (General)
33SOSCI/RP4(1)/CN1/RB4I/OMultiplexed I/O & Peripheral Pin SOSCI/RP4(1)/CN1/RB4 (General)
34SOSCO/T1CK/CN0/RA4I/OMultiplexed I/O & Peripheral Pin SOSCO/T1CK/CN0/RA4 (General)
35TDI/PMA9/RA9I/OMultiplexed I/O & Peripheral Pin TDI/PMA9/RA9 (General)
36RP19/CN28/PMBE/RC3I/OMultiplexed I/O & Peripheral Pin RP19/CN28/PMBE/RC3 (General)
37RP20/CN25/PMA4/RC4I/OMultiplexed I/O & Peripheral Pin RP20/CN25/PMA4/RC4 (General)
38RP21/CN26/PMA3/RC5I/OMultiplexed I/O & Peripheral Pin RP21/CN26/PMA3/RC5 (General)
39VSSGNDExposed Thermal & Ground Pad (VSS)
40VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
41IO41I/OGeneral Purpose Digital I/O Pin IO41
42IO42I/OGeneral Purpose Digital I/O Pin IO42
43INT0/RP7/CN23/PMD5/RB7I/OMultiplexed I/O & Peripheral Pin INT0/RP7/CN23/PMD5/RB7 (General)
44SCL1/RP8/CN22/PMD4/RB8I/OMultiplexed I/O & Peripheral Pin SCL1/RP8/CN22/PMD4/RB8 (I2C)
45EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 SDA1/RP9/CN21/PMD3/RB9
I/O
Multiplexed I/O & Peripheral Pin SDA1/RP9/CN21/PMD3/RB9 (I2C)
Design note: Signal terminal SDA1/RP9/CN21/PMD3/RB9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SDA1/RP9/CN21/PMD3/RB9. Supported peripheral buses: I2C.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 16 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 2. Standard Pinout (Top View)
True package pinout (45 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 4. Package Dimensions (D×E×A)
QFN-44-EP(8x8) · 8.00×8.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 5. Recommended Land Pattern
IPC-7351B Footprint (45 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (16 figures · Page 1/2)
Showing 1–12 of 16 uncropped original figures for PIC24HJ64GP5 / PIC24HJ128GP / PIC24HJ256GP
P1 · p01_fig01376×200px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog
16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog
P10 · p10_fig011753×2362px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — FIGURE 1-1: PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04 BLOCK DIAGRAM PSV and Table Data Access Control Block
FIGURE 1-1: PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04 BLOCK DIAGRAM PSV and Table Data Access Control Block
P53 · p53_fig011625×913px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
P53 · p53_fig021777×993px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
P54 · p54_fig01867×544px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — TRW 11064 Cycles 7.37 MHz 1 0.05 - ( ) 1 0.00375 - ( ) × × ----------------------------------------------------------------------------------------------- 1.586ms = =
TRW 11064 Cycles 7.37 MHz 1 0.05 - ( ) 1 0.00375 - ( ) × × ----------------------------------------------------------------------------------------------- 1.586ms = =
P54 · p54_fig02867×440px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — 5.4 Control Registers
5.4 Control Registers
P54 · p54_fig031783×379px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — EQUATION 5-1: PROGRAMMING TIME | For example, if the device is operating at +125°C, the FRC accuracy will be ±5%. If the TUN<5:0> bits (see Register 9-4) are set to ‘b111111, the minimum row write time is equal to Equation 5-2. | 5.5.1 KEY
EQUATION 5-1: PROGRAMMING TIME | For example, if the device is operating at +125°C, the FRC accuracy will be ±5%. If the TUN<5:0> bits (see Register 9-4) are set to ‘b111111, the minimum row write time is equal to Equation 5-2. | 5.5.1 KEY
P277 · p277_fig01867×912px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — FIGURE 25-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
FIGURE 25-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
P277 · p277_fig01P277
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — Datasheet Page 277 (p277_fig01)
Datasheet Page 277 (p277_fig01)
P361 · p361_fig011777×2607px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
P366 · p366_fig011777×2356px
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — DS70293G-page 366 © 2007-2012 Microchip Technology Inc.
DS70293G-page 366 © 2007-2012 Microchip Technology Inc.
P366 · p366_fig01P366
PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) — Datasheet Page 366 (p366_fig01)
Datasheet Page 366 (p366_fig01)
Page 1 / 2 (16 extracted figures)

Technical Specifications & Part Details (PIC24HJ64GP504-E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) is a 44-pin standard electronic & interconnect component featuring a 8.00 × 8.00 × 1.00 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3.0V to 3.6V supply operation across -40°C to +125°C with integrated UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
7.37 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
8.00 × 8.00 × 1.00 mm (A1=0.03 mm)
Package family: QFN (QFN-44-EP(8x8))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol45 auto-grouped pins
OK
IPC-7351B Land Pattern45 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 6.55×6.55mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC24HJ64GP5 / PIC24HJ128GP / PIC24HJ256GP (11)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-44-EP(8x8))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
8.00 × 8.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
45P / 45Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-44-EP(8x8)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC24HJ64GP504-E/ML (QFN-44-EP(8x8))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC24HJ64GP504-E/ML (QFN-44-EP(8x8))?

Manufactured by MICROCHIP, the PIC24HJ64GP504-E/ML is housed in a QFN-44-EP(8x8) package with 45 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (SDA1/RP9/CN21/PMD3/RB9: Multiplexed I/O & Peripheral Pin SDA1/RP9/CN21/PMD3/RB9 (I2C)), 2 (RP22/CN18/PMA1/RC6: Multiplexed I/O & Peripheral Pin RP22/CN18/PMA1/RC6 (General)), 3 (RP23/CN17/PMA0/RC7: Multiplexed I/O & Peripheral Pin RP23/CN17/PMA0/RC7 (General)), 4 (RP24/CN20/PMA5/RC8: Multiplexed I/O & Peripheral Pin RP24/CN20/PMA5/RC8 (General)), 5 (RP25/CN19/PMA6/RC9: Multiplexed I/O & Peripheral Pin RP25/CN19/PMA6/RC9 (General)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for PIC24HJ64GP504-E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC24HJ64GP504-E/ML (QFN-44-EP(8x8)) has a nominal body envelope of 8.00 × 8.00 mm, pitch e = 0.65 mm, and 45 copper pads plus a central exposed thermal pad (EPAD) of 6.55 × 6.55 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC24HJ64GP504-E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC24HJ64GP504-E/ML (MICROCHIP, QFN-44-EP(8x8)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (45 pins) & PIC24HJ64GP5 / PIC24HJ128GP / PIC24HJ256GP Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SDA1/RP9/CN21/PMD3/RB9Digital_IOSignal terminal SDA1/RP9/CN21/PMD3/RB9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SDA1/RP9/CN21/PMD3/RB9. Supported peripheral buses: I2C.
2RP22/CN18/PMA1/RC6Digital_IOSignal terminal RP22/CN18/PMA1/RC6 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP22/CN18/PMA1/RC6. Supported peripheral buses: General.
3RP23/CN17/PMA0/RC7Digital_IOSignal terminal RP23/CN17/PMA0/RC7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP23/CN17/PMA0/RC7. Supported peripheral buses: General.
4RP24/CN20/PMA5/RC8Digital_IOSignal terminal RP24/CN20/PMA5/RC8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP24/CN20/PMA5/RC8. Supported peripheral buses: General.
5RP25/CN19/PMA6/RC9Digital_IOSignal terminal RP25/CN19/PMA6/RC9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP25/CN19/PMA6/RC9. Supported peripheral buses: General.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7VCAPDigital_IOSignal terminal VCAP (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12TMS/PMA10/RA10Digital_IOSignal terminal TMS/PMA10/RA10 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TMS/PMA10/RA10. Supported peripheral buses: General.
13TCK/PMA7/RA7Digital_IOSignal terminal TCK/PMA7/RA7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TCK/PMA7/RA7. Supported peripheral buses: General.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
17AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
18MCLR#Digital_IOSignal terminal MCLR# (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
19AN0/VREF+/CN2/RA0AnalogSignal terminal AN0/VREF+/CN2/RA0 (Analog, 3.0V to 3.6V domain). Multiplexed alternate functions: AN0/VREF+/CN2/RA0. Supported peripheral buses: General.
20AN1/VREF-/CN3/RA1AnalogSignal terminal AN1/VREF-/CN3/RA1 (Analog, 3.0V to 3.6V domain). Multiplexed alternate functions: AN1/VREF-/CN3/RA1. Supported peripheral buses: General.
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22IO11Digital_IOGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23AN4/C1IN-/RP2/CN6/RB2Digital_IOSignal terminal AN4/C1IN-/RP2/CN6/RB2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN4/C1IN-/RP2/CN6/RB2. Supported peripheral buses: General.
24AN5/C1IN+/RP3/CN7/RB3Digital_IOSignal terminal AN5/C1IN+/RP3/CN7/RB3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN5/C1IN+/RP3/CN7/RB3. Supported peripheral buses: General.
25AN6/RP16/CN8/RC0Digital_IOSignal terminal AN6/RP16/CN8/RC0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN6/RP16/CN8/RC0. Supported peripheral buses: General.
26AN7/RP17/CN9/RC1Digital_IOSignal terminal AN7/RP17/CN9/RC1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN7/RP17/CN9/RC1. Supported peripheral buses: General.
27IO47Digital_IOGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
29VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
30OSC1/CLKI/CN30/RA2Digital_IOSignal terminal OSC1/CLKI/CN30/RA2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKI/CN30/RA2. Supported peripheral buses: RTC/CLK.
31OSC2/CLKO/CN29/RA3Digital_IOSignal terminal OSC2/CLKO/CN29/RA3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKO/CN29/RA3. Supported peripheral buses: RTC/CLK.
32TDO/PMA8/RA8Digital_IOSignal terminal TDO/PMA8/RA8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDO/PMA8/RA8. Supported peripheral buses: General.
33SOSCI/RP4(1)/CN1/RB4Digital_IOSignal terminal SOSCI/RP4(1)/CN1/RB4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SOSCI/RP4(1)/CN1/RB4. Supported peripheral buses: General.
34SOSCO/T1CK/CN0/RA4Digital_IOSignal terminal SOSCO/T1CK/CN0/RA4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SOSCO/T1CK/CN0/RA4. Supported peripheral buses: General.
35TDI/PMA9/RA9Digital_IOSignal terminal TDI/PMA9/RA9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDI/PMA9/RA9. Supported peripheral buses: General.
36RP19/CN28/PMBE/RC3Digital_IOSignal terminal RP19/CN28/PMBE/RC3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP19/CN28/PMBE/RC3. Supported peripheral buses: General.
37RP20/CN25/PMA4/RC4Digital_IOSignal terminal RP20/CN25/PMA4/RC4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP20/CN25/PMA4/RC4. Supported peripheral buses: General.
38RP21/CN26/PMA3/RC5Digital_IOSignal terminal RP21/CN26/PMA3/RC5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP21/CN26/PMA3/RC5. Supported peripheral buses: General.
39VSSGNDBottom exposed die attach pad (VSS) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.
40VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
41IO41Digital_IOGeneral Purpose Digital I/O Pin IO41
42IO42Digital_IOGeneral Purpose Digital I/O Pin IO42
43INT0/RP7/CN23/PMD5/RB7Digital_IOSignal terminal INT0/RP7/CN23/PMD5/RB7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: INT0/RP7/CN23/PMD5/RB7. Supported peripheral buses: General.
44SCL1/RP8/CN22/PMD4/RB8Digital_IOSignal terminal SCL1/RP8/CN22/PMD4/RB8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SCL1/RP8/CN22/PMD4/RB8. Supported peripheral buses: I2C.
45EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.