PIC18F86J50T-I/PT (TQFP-80(12x12)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18F86J50T-I/PT

MICROCHIPTQFP-80(12x12) · 80 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18F86J50T-I/PT (TQFP-80(12x12))1CH0+2CH0-3RE1/LCDBIAS24RE0/LCDBIAS15RG0/LCDBIAS06RG1/TX2/CK27MCLR8RG3/VLCAP29VSS10IO511VSS12VDDCORE/VCAP13RF7/AN5/SS/S14RF6/AN11/SEG15IO1716RF4/AN9/SEG217VUSB18ENVREG19AVDD20AVSS21RF1/AN6/C2OU22ENVREG23AVDD24AVSS25VSS26VDD27RA2/AN2/VREF28REFIN+/OUT29REFIN-30RA1/AN1/SEG131RA0/AN032VSS33RA5/AN4/SEG134RA4/T0CKI/SE35RC1/T1OSI/CC36SVSS37RC0/T1OSO/T138VDD39IO3940IO4080RE2/LCDBIAS379RE3/COM078RE4/COM177RE5/COM276RE6/COM375RE7/CCP2/SEG74SAVDD73RD0/SEG0/CTP72VDD71VSS70SVDD69ARESET68RD1/SEG167RD2/SEG266RD3/SEG365RD4/SEG464SDIA63RD5/SEG562RD6/SEG661RD7/SEG760SDOA59SCKA58CSA57VDD56VSS55RB2/INT2/SEG54RB3/INT3/SEG53RB4/KBI0/SEG52RB5/KBI1/SEG51RB6/KBI2/PGC50IO5049IO4948RA7/OSC1/CLK47VDD46RB7/KBI3/PGD45RC5/SDO/SEG144RC4/SDI/SDA/43RC3/SCK/SCL/42RC2/CCP1/SEG41VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.855.950.845.740.635.630.525.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4-30.5-35.6-40.6-45.7-50.8-55.9mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980E=12.00mm · Pitch e=0.50mmD=12.00mm-11-9-7-5-3-113579111197531-1-3-5-7-9-11mm
3. 3D CAD MODEL
Package Body: 12.00mm × 12.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (80/80)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CH0+I/OMultiplexed I/O & Peripheral Pin CH0+ (General)
2CH0-I/OMultiplexed I/O & Peripheral Pin CH0- (General)
3RE1/LCDBIAS2I/OMultiplexed I/O & Peripheral Pin RE1/LCDBIAS2 (General)
4RE0/LCDBIAS1I/OMultiplexed I/O & Peripheral Pin RE0/LCDBIAS1 (General)
5RG0/LCDBIAS0I/OMultiplexed I/O & Peripheral Pin RG0/LCDBIAS0 (General)
6RG1/TX2/CK2I/OMultiplexed I/O & Peripheral Pin RG1/TX2/CK2 (General)
7MCLRI/OMultiplexed I/O & Peripheral Pin MCLR (General)
8RG3/VLCAP2I/OMultiplexed I/O & Peripheral Pin RG3/VLCAP2 (General)
9VSSGNDGround Reference Pin (VSS)
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11VSSGNDGround Reference Pin (VSS)
12VDDCORE/VCAPPowerPower Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)
13RF7/AN5/SS/SEG25I/OMultiplexed I/O & Peripheral Pin RF7/AN5/SS/SEG25 (General)
14RF6/AN11/SEG24/C1INAI/OMultiplexed I/O & Peripheral Pin RF6/AN11/SEG24/C1INA (General)
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16RF4/AN9/SEG22/C2INAI/OMultiplexed I/O & Peripheral Pin RF4/AN9/SEG22/C2INA (General)
17VUSBI/OMultiplexed I/O & Peripheral Pin VUSB (USB)
18ENVREGI/OMultiplexed I/O & Peripheral Pin ENVREG (General)
19AVDDPowerPower Supply Input (AVDD — 2.0V to 3.6V)
20AVSSGNDGround Reference Pin (AVSS)
21RF1/AN6/C2OUT/SEG19I/OMultiplexed I/O & Peripheral Pin RF1/AN6/C2OUT/SEG19 (General)
22ENVREGI/OMultiplexed I/O & Peripheral Pin ENVREG (General)
23AVDDPowerPower Supply Input (AVDD — 2.0V to 3.6V)
24AVSSGNDGround Reference Pin (AVSS)
25VSSGNDGround Reference Pin (VSS)
26VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
27RA2/AN2/VREF-AnalogMultiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)
28REFIN+/OUTI/OMultiplexed I/O & Peripheral Pin REFIN+/OUT (General)
29REFIN-I/OMultiplexed I/O & Peripheral Pin REFIN- (General)
30RA1/AN1/SEG18I/OMultiplexed I/O & Peripheral Pin RA1/AN1/SEG18 (General)
31RA0/AN0I/OMultiplexed I/O & Peripheral Pin RA0/AN0 (General)
32VSSGNDGround Reference Pin (VSS)
33RA5/AN4/SEG15I/OMultiplexed I/O & Peripheral Pin RA5/AN4/SEG15 (General)
34RA4/T0CKI/SEG14I/OMultiplexed I/O & Peripheral Pin RA4/T0CKI/SEG14 (General)
35RC1/T1OSI/CCP2/SEG32I/OMultiplexed I/O & Peripheral Pin RC1/T1OSI/CCP2/SEG32 (General)
36SVSSGNDGround Reference Pin (SVSS)
37RC0/T1OSO/T13CKII/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T13CKI (General)
38VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
39IO39I/OGeneral Purpose Digital I/O Pin IO39
40IO40I/OGeneral Purpose Digital I/O Pin IO40
41VSSGNDGround Reference Pin (VSS)
42RC2/CCP1/SEG13I/OMultiplexed I/O & Peripheral Pin RC2/CCP1/SEG13 (General)
43RC3/SCK/SCL/SEG17I/OMultiplexed I/O & Peripheral Pin RC3/SCK/SCL/SEG17 (SPI, I2C)
44RC4/SDI/SDA/SEG16I/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA/SEG16 (I2C)
45RC5/SDO/SEG12I/OMultiplexed I/O & Peripheral Pin RC5/SDO/SEG12 (General)
46RB7/KBI3/PGDI/OMultiplexed I/O & Peripheral Pin RB7/KBI3/PGD (General)
47VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
48RA7/OSC1/CLKII/OMultiplexed I/O & Peripheral Pin RA7/OSC1/CLKI (RTC/CLK)
49IO49I/OGeneral Purpose Digital I/O Pin IO49
50IO50I/OGeneral Purpose Digital I/O Pin IO50
51RB6/KBI2/PGCI/OMultiplexed I/O & Peripheral Pin RB6/KBI2/PGC (General)
52RB5/KBI1/SEG29I/OMultiplexed I/O & Peripheral Pin RB5/KBI1/SEG29 (General)
53RB4/KBI0/SEG11I/OMultiplexed I/O & Peripheral Pin RB4/KBI0/SEG11 (General)
54RB3/INT3/SEG10/CTED2I/OMultiplexed I/O & Peripheral Pin RB3/INT3/SEG10/CTED2 (General)
55RB2/INT2/SEG9/CTED1I/OMultiplexed I/O & Peripheral Pin RB2/INT2/SEG9/CTED1 (General)
56VSSGNDGround Reference Pin (VSS)
57VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
58CSAI/OMultiplexed I/O & Peripheral Pin CSA (General)
59SCKAI/OMultiplexed I/O & Peripheral Pin SCKA (SPI)
60SDOAI/OMultiplexed I/O & Peripheral Pin SDOA (General)
61RD7/SEG7I/OMultiplexed I/O & Peripheral Pin RD7/SEG7 (General)
62RD6/SEG6I/OMultiplexed I/O & Peripheral Pin RD6/SEG6 (General)
63RD5/SEG5I/OMultiplexed I/O & Peripheral Pin RD5/SEG5 (General)
64SDIAI/OMultiplexed I/O & Peripheral Pin SDIA (General)
65RD4/SEG4I/OMultiplexed I/O & Peripheral Pin RD4/SEG4 (General)
66RD3/SEG3I/OMultiplexed I/O & Peripheral Pin RD3/SEG3 (General)
67RD2/SEG2I/OMultiplexed I/O & Peripheral Pin RD2/SEG2 (General)
68RD1/SEG1I/OMultiplexed I/O & Peripheral Pin RD1/SEG1 (General)
69ARESETISystem Enable & Hardware Reset (ARESET)
70SVDDPowerPower Supply Input (SVDD — 2.0V to 3.6V)
71VSSGNDGround Reference Pin (VSS)
72VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
73RD0/SEG0/CTPLSI/OMultiplexed I/O & Peripheral Pin RD0/SEG0/CTPLS (General)
74SAVDDPowerPower Supply Input (SAVDD — 2.0V to 3.6V)
75RE7/CCP2/SEG31I/OMultiplexed I/O & Peripheral Pin RE7/CCP2/SEG31 (General)
76RE6/COM3I/OMultiplexed I/O & Peripheral Pin RE6/COM3 (General)
77RE5/COM2I/OMultiplexed I/O & Peripheral Pin RE5/COM2 (General)
78RE4/COM1I/OMultiplexed I/O & Peripheral Pin RE4/COM1 (General)
79RE3/COM0I/OMultiplexed I/O & Peripheral Pin RE3/COM0 (General)
80RE2/LCDBIAS3I/OMultiplexed I/O & Peripheral Pin RE2/LCDBIAS3 (General)
PIN 1 CH0+
I/O
Multiplexed I/O & Peripheral Pin CH0+ (General)
Design note: Signal terminal CH0+ (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: CH0+. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 2. Standard Pinout (Top View)
True package pinout (80 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 4. Package Dimensions (D×E×A)
TQFP-80(12x12) · 12.00×12.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 5. Recommended Land Pattern
IPC-7351B Footprint (80 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18F86J50T-I/PT (TQFP-80(12x12)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for PIC18F86J50T / PIC18F85J50 / PIC18F65J50
P2 · p02_fig011777×1640px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — DS39775C-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
DS39775C-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
P2 · p02_fig02788×285px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — DS39775C-page 2 © 2009 Microchip Technology Inc.
DS39775C-page 2 © 2009 Microchip Technology Inc.
P211 · p211_fig011777×341px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — FIGURE 17-2: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 17-2: CAPTURE MODE OPERATION BLOCK DIAGRAM
P211 · p211_fig021777×1059px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — FIGURE 17-2: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 17-2: CAPTURE MODE OPERATION BLOCK DIAGRAM
P212 · p212_fig011778×546px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — The action on the pin is based on the value of the mode select bits (CCPxM3:CCPxM0). At the same time, the interrupt flag bit, CCPxIF, is set.
The action on the pin is based on the value of the mode select bits (CCPxM3:CCPxM0). At the same time, the interrupt flag bit, CCPxIF, is set.
P212 · p212_fig021539×907px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — FIGURE 17-3: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 17-3: COMPARE MODE OPERATION BLOCK DIAGRAM
P212 · p212_fig01P212
PIC18F86J50T-I/PT (TQFP-80(12x12)) — Datasheet Page 212 (p212_fig01)
Datasheet Page 212 (p212_fig01)
P237 · p237_fig011777×938px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
P315 · p315_fig01867×782px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — FIGURE 22-2: EXTERNAL CIRCUITRY PIC® Microcontroller Host Controller/HUB
FIGURE 22-2: EXTERNAL CIRCUITRY PIC® Microcontroller Host Controller/HUB
P315 · p315_fig01P315
PIC18F86J50T-I/PT (TQFP-80(12x12)) — Datasheet Page 315 (p315_fig01)
Datasheet Page 315 (p315_fig01)
P459 · p459_fig02414×490px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — Example
Example
P459 · p459_fig03414×490px
PIC18F86J50T-I/PT (TQFP-80(12x12)) — 80-Lead TQFP | XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN
80-Lead TQFP | XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (PIC18F86J50T-I/PT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18F86J50T-I/PT (TQFP-80(12x12)) is a 80-pin standard electronic & interconnect component featuring a 12.00 × 12.00 × 1.20 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.0V to 3.6V supply operation across -10°C to +70°C with integrated USB, UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
48 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
12.00 × 12.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-80(12x12))
Pin Count & Lead PitchN / e
80 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol80 auto-grouped pins
OK
IPC-7351B Land Pattern80 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18F86J50T / PIC18F85J50 / PIC18F65J50 (4)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TQFP-80(12x12))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
12.00 × 12.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
80P / 80Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-80(12x12)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18F86J50T-I/PT (TQFP-80(12x12))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18F86J50T-I/PT (TQFP-80(12x12))?

Manufactured by MICROCHIP, the PIC18F86J50T-I/PT is housed in a TQFP-80(12x12) package with 80 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (CH0+: Multiplexed I/O & Peripheral Pin CH0+ (General)), 2 (CH0-: Multiplexed I/O & Peripheral Pin CH0- (General)), 3 (RE1/LCDBIAS2: Multiplexed I/O & Peripheral Pin RE1/LCDBIAS2 (General)), 4 (RE0/LCDBIAS1: Multiplexed I/O & Peripheral Pin RE0/LCDBIAS1 (General)), 5 (RG0/LCDBIAS0: Multiplexed I/O & Peripheral Pin RG0/LCDBIAS0 (General)), 6 (RG1/TX2/CK2: Multiplexed I/O & Peripheral Pin RG1/TX2/CK2 (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC18F86J50T-I/PT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18F86J50T-I/PT (TQFP-80(12x12)) has a nominal body envelope of 12.00 × 12.00 mm, pitch e = 0.50 mm, and 80 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18F86J50T-I/PT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18F86J50T-I/PT (MICROCHIP, TQFP-80(12x12)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (80 pins) & PIC18F86J50T / PIC18F85J50 / PIC18F65J50 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CH0+Digital_IOSignal terminal CH0+ (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: CH0+. Supported peripheral buses: General.
2CH0-Digital_IOSignal terminal CH0- (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: CH0-. Supported peripheral buses: General.
3RE1/LCDBIAS2Digital_IOSignal terminal RE1/LCDBIAS2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE1/LCDBIAS2. Supported peripheral buses: General.
4RE0/LCDBIAS1Digital_IOSignal terminal RE0/LCDBIAS1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE0/LCDBIAS1. Supported peripheral buses: General.
5RG0/LCDBIAS0Digital_IOSignal terminal RG0/LCDBIAS0 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RG0/LCDBIAS0. Supported peripheral buses: General.
6RG1/TX2/CK2Digital_IOSignal terminal RG1/TX2/CK2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RG1/TX2/CK2. Supported peripheral buses: General.
7MCLRDigital_IOSignal terminal MCLR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR. Supported peripheral buses: General.
8RG3/VLCAP2Digital_IOSignal terminal RG3/VLCAP2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RG3/VLCAP2. Supported peripheral buses: General.
9VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
12VDDCORE/VCAPPower_InPrimary positive power supply input (VDDCORE/VCAP) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
13RF7/AN5/SS/SEG25RF_50OhmSignal terminal RF7/AN5/SS/SEG25 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RF7/AN5/SS/SEG25. Supported peripheral buses: General.
14RF6/AN11/SEG24/C1INARF_50OhmSignal terminal RF6/AN11/SEG24/C1INA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RF6/AN11/SEG24/C1INA. Supported peripheral buses: General.
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16RF4/AN9/SEG22/C2INARF_50OhmSignal terminal RF4/AN9/SEG22/C2INA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RF4/AN9/SEG22/C2INA. Supported peripheral buses: General.
17VUSBDigital_IOSignal terminal VUSB (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: VUSB. Supported peripheral buses: USB.
18ENVREGDigital_IOSignal terminal ENVREG (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: ENVREG. Supported peripheral buses: General.
19AVDDPower_InPrimary positive power supply input (AVDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
20AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
21RF1/AN6/C2OUT/SEG19RF_50OhmSignal terminal RF1/AN6/C2OUT/SEG19 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RF1/AN6/C2OUT/SEG19. Supported peripheral buses: General.
22ENVREGDigital_IOSignal terminal ENVREG (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: ENVREG. Supported peripheral buses: General.
23AVDDPower_InPrimary positive power supply input (AVDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
24AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
25VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
26VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
27RA2/AN2/VREF-AnalogSignal terminal RA2/AN2/VREF- (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: RA2/AN2/VREF-. Supported peripheral buses: General.
28REFIN+/OUTDigital_IOSignal terminal REFIN+/OUT (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: REFIN+/OUT. Supported peripheral buses: General.
29REFIN-Digital_IOSignal terminal REFIN- (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: REFIN-. Supported peripheral buses: General.
30RA1/AN1/SEG18Digital_IOSignal terminal RA1/AN1/SEG18 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA1/AN1/SEG18. Supported peripheral buses: General.
31RA0/AN0Digital_IOSignal terminal RA0/AN0 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA0/AN0. Supported peripheral buses: General.
32VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
33RA5/AN4/SEG15Digital_IOSignal terminal RA5/AN4/SEG15 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA5/AN4/SEG15. Supported peripheral buses: General.
34RA4/T0CKI/SEG14Digital_IOSignal terminal RA4/T0CKI/SEG14 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA4/T0CKI/SEG14. Supported peripheral buses: General.
35RC1/T1OSI/CCP2/SEG32Digital_IOSignal terminal RC1/T1OSI/CCP2/SEG32 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC1/T1OSI/CCP2/SEG32. Supported peripheral buses: General.
36SVSSGND0V electrical ground return terminal (SVSS) for internal core logic, I/O drivers, and analog sub-blocks.
37RC0/T1OSO/T13CKIDigital_IOSignal terminal RC0/T1OSO/T13CKI (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC0/T1OSO/T13CKI. Supported peripheral buses: General.
38VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
39IO39Digital_IOGeneral Purpose Digital I/O Pin IO39
40IO40Digital_IOGeneral Purpose Digital I/O Pin IO40
41VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
42RC2/CCP1/SEG13Digital_IOSignal terminal RC2/CCP1/SEG13 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC2/CCP1/SEG13. Supported peripheral buses: General.
43RC3/SCK/SCL/SEG17Digital_IOSignal terminal RC3/SCK/SCL/SEG17 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC3/SCK/SCL/SEG17. Supported peripheral buses: SPI, I2C.
44RC4/SDI/SDA/SEG16Digital_IOSignal terminal RC4/SDI/SDA/SEG16 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4/SDI/SDA/SEG16. Supported peripheral buses: I2C.
45RC5/SDO/SEG12Digital_IOSignal terminal RC5/SDO/SEG12 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5/SDO/SEG12. Supported peripheral buses: General.
46RB7/KBI3/PGDDigital_IOSignal terminal RB7/KBI3/PGD (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB7/KBI3/PGD. Supported peripheral buses: General.
47VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
48RA7/OSC1/CLKIDigital_IOSignal terminal RA7/OSC1/CLKI (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA7/OSC1/CLKI. Supported peripheral buses: RTC/CLK.
49IO49Digital_IOGeneral Purpose Digital I/O Pin IO49
50IO50Digital_IOGeneral Purpose Digital I/O Pin IO50
51RB6/KBI2/PGCDigital_IOSignal terminal RB6/KBI2/PGC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB6/KBI2/PGC. Supported peripheral buses: General.
52RB5/KBI1/SEG29Digital_IOSignal terminal RB5/KBI1/SEG29 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB5/KBI1/SEG29. Supported peripheral buses: General.
53RB4/KBI0/SEG11Digital_IOSignal terminal RB4/KBI0/SEG11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB4/KBI0/SEG11. Supported peripheral buses: General.
54RB3/INT3/SEG10/CTED2Digital_IOSignal terminal RB3/INT3/SEG10/CTED2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB3/INT3/SEG10/CTED2. Supported peripheral buses: General.
55RB2/INT2/SEG9/CTED1Digital_IOSignal terminal RB2/INT2/SEG9/CTED1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB2/INT2/SEG9/CTED1. Supported peripheral buses: General.
56VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
57VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
58CSADigital_IOSignal terminal CSA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: CSA. Supported peripheral buses: General.
59SCKADigital_IOSignal terminal SCKA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SCKA. Supported peripheral buses: SPI.
60SDOADigital_IOSignal terminal SDOA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SDOA. Supported peripheral buses: General.
61RD7/SEG7Digital_IOSignal terminal RD7/SEG7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD7/SEG7. Supported peripheral buses: General.
62RD6/SEG6Digital_IOSignal terminal RD6/SEG6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD6/SEG6. Supported peripheral buses: General.
63RD5/SEG5Digital_IOSignal terminal RD5/SEG5 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD5/SEG5. Supported peripheral buses: General.
64SDIADigital_IOSignal terminal SDIA (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SDIA. Supported peripheral buses: General.