ChipDocs.org
⌘K
2284 PARTSUpload PDF
BLE-SER-A-ANT (SMD,10.6x10.2mm) — Symbol, Footprint IPC-7351B & 3D STEP Model

BLE-SER-A-ANT

WCHID: C2829462SMD,10.6x10.2mm · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · BLE-SER-A-ANT (SMD,10.6x10.2mm)1BLE_MODE2VCC3GND4RELOAD/LED8RXD7TXD6CTS5RTS#Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
ANTENNA KEEPOUT (5.1mm)87654321E=10.20mm · Pitch e=1.27mmD=10.60mm-9-7-5-3-11357986420-2-4-6-8mm
3. 3D CAD MODEL
Package Body: 10.20mm × 10.60mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1BLE_MODEI/OMultiplexed I/O & Peripheral Pin BLE_MODE (General)
2VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
3GNDGNDGround Reference Pin (GND)
4RELOAD/LEDI/OMultiplexed I/O & Peripheral Pin RELOAD/LED (General)
5RTS#I/ORTS# (UART)
6CTSI/OCTS (UART)
7TXDI/OMultiplexed I/O & Peripheral Pin TXD (UART)
8RXDI/OMultiplexed I/O & Peripheral Pin RXD (UART)
PIN 1 BLE_MODE
I/O
Multiplexed I/O & Peripheral Pin BLE_MODE (General)
Design note: Signal terminal BLE_MODE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BLE_MODE. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: BLE-SER-A-ANT (WCH · SMD,10.6x10.2mm)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 4. Package Dimensions (D×E×A)
SMD,10.6x10.2mm · 10.20×10.60mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
BLE-SER-A-ANT (SMD,10.6x10.2mm) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for BLE
P1 · p01_fig011659×501px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 图1 蓝牙主机通过CH9140 蓝牙与串口设备进行串口通讯框图
图1 蓝牙主机通过CH9140 蓝牙与串口设备进行串口通讯框图
P1 · p01_fig021659×502px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 图1 蓝牙主机通过CH9140 蓝牙与串口设备进行串口通讯框图
图1 蓝牙主机通过CH9140 蓝牙与串口设备进行串口通讯框图
P2 · p02_fig011479×1004px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 3、BLE-SER-A 封装尺寸及引脚定义
3、BLE-SER-A 封装尺寸及引脚定义
P2 · p02_fig01P2
BLE-SER-A-ANT (SMD,10.6x10.2mm) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig011386×656px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — BLE-SER 3 http://wch.cn
BLE-SER 3 http://wch.cn
P3 · p03_fig02680×560px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 4、BLE-SER-A 封装推荐焊盘尺寸
4、BLE-SER-A 封装推荐焊盘尺寸
P3 · p03_fig031073×940px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 6、功能说明
6、功能说明
P3 · p03_fig01P3
BLE-SER-A-ANT (SMD,10.6x10.2mm) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P4 · p04_fig011660×775px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — GND
GND
P4 · p04_fig01P4
BLE-SER-A-ANT (SMD,10.6x10.2mm) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P5 · p05_fig01869×1053px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — BLE-SER 5 http://wch.cn
BLE-SER 5 http://wch.cn
P5 · p05_fig021087×804px
BLE-SER-A-ANT (SMD,10.6x10.2mm) — 8、回流焊条件
8、回流焊条件

Technical Specifications & Part Details (BLE-SER-A-ANT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:BLE-SER-A-ANT (SMD,10.6x10.2mm) is a 8-pin standard electronic & interconnect component featuring a 10.22 × 10.60 × 2.00 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Bluetooth / BLE, UART interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.22 × 10.60 × 2.00 mm (A1=0.10 mm)
Package family: OTHER (SMD,10.6x10.2mm)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Bluetooth / BLE, UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SMD,10.6x10.2mm)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.60 × 10.20 mm
Height (A) & Pitch (e)IPC-7351B
A=2.40mm · e=1.27mm
Pad Size (W × L)Level B
0.80 × 2.00 mm
Pins / Total PadsTopology
8P / 8Pad (CASTELLATED_MODULE)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SMD,10.6x10.2mm
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — BLE-SER-A-ANT (SMD,10.6x10.2mm)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of BLE-SER-A-ANT (SMD,10.6x10.2mm)?

Manufactured by WCH, the BLE-SER-A-ANT is housed in a SMD,10.6x10.2mm package with 8 pins and a 1.27 mm lead pitch. Key pins include: 1 (BLE_MODE: Multiplexed I/O & Peripheral Pin BLE_MODE (General)), 2 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 3 (GND: Ground Reference Pin (GND)), 4 (RELOAD/LED: Multiplexed I/O & Peripheral Pin RELOAD/LED (General)), 5 (RTS#: RTS# (UART)), 6 (CTS: CTS (UART)).

What are the IPC-7351B PCB Footprint dimensions for BLE-SER-A-ANT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), BLE-SER-A-ANT (SMD,10.6x10.2mm) has a nominal body envelope of 10.20 × 10.60 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for BLE-SER-A-ANT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for BLE-SER-A-ANT (WCH, SMD,10.6x10.2mm) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & BLE Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1BLE_MODEDigital_IOSignal terminal BLE_MODE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BLE_MODE. Supported peripheral buses: General.
2VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4RELOAD/LEDDigital_IOSignal terminal RELOAD/LED (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RELOAD/LED. Supported peripheral buses: General.
5RTS#Digital_IOMODEM hardware flow-control output signal (DTR# / RTS# active-low); commonly used for ESP32/Arduino auto-reset/bootloader entry.
6CTSDigital_IOMODEM hardware flow-control handshake input signal (active-low: CTS# / DSR# / RI# / DCD#).
7TXDDigital_IOSignal terminal TXD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD. Supported peripheral buses: UART.
8RXDDigital_IOSignal terminal RXD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD. Supported peripheral buses: UART.
ExplorePartsPackagesMFRsUpload