MIC37300-3.3WR (SPAK-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC37300-3.3WR

MICROCHIPSPAK-3 · 4 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC37300-3.3WR (SPAK-3)1VIN2GND4TAB3VOUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
4321E=9.50mm · Pitch e=2.54mmD=8.10mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 9.50mm × 8.10mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (4/4)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VINPowerRegulated Power Output (VIN — 2.25V to 6.0V)
2GNDGNDGround Reference Pin (GND)
3VOUTPowerRegulated Power Output (VOUT — 2.25V to 6.0V)
4TABI/OMultiplexed I/O & Peripheral Pin TAB (General)
PIN 1 VIN
Power
Regulated Power Output (VIN — 2.25V to 6.0V)
Design note: Input voltage that supplies current to the output power device.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC37300-3.3WR (SPAK-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC37300-3.3WR (SPAK-3) - 2. Standard Pinout (Top View)
True package pinout (4 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC37300-3.3WR (SPAK-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC37300-3.3WR (SPAK-3) - 4. Package Dimensions (D×E×A)
SPAK-3 · 9.50×8.10mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC37300-3.3WR (SPAK-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (4 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC37300-3.3WR (SPAK-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MIC37300 / MIC37302
P13 · p13_fig01EXACT PACKAGE
MIC37300-3.3WR (SPAK-3) — 3-Pin S-PAK (R)
3-Pin S-PAK (R)
P1 · p01_fig01622×298px
MIC37300-3.3WR (SPAK-3) — Typical Application
Typical Application
P1 · p01_fig02833×313px
MIC37300-3.3WR (SPAK-3) — Fixed 2.5 Regulator Adjustable Regulator
Fixed 2.5 Regulator Adjustable Regulator
P1 · p01_fig01P1
MIC37300-3.3WR (SPAK-3) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P3 · p03_fig01481×243px
MIC37300-3.3WR (SPAK-3) — Pin Configuration
Pin Configuration
P3 · p03_fig02438×243px
MIC37300-3.3WR (SPAK-3) — S-PAK-3 (R)
S-PAK-3 (R)
P3 · p03_fig03452×456px
MIC37300-3.3WR (SPAK-3) — (Top View)
(Top View)
P3 · p03_fig04460×287px
MIC37300-3.3WR (SPAK-3) — 3mm × 3mm DFN (ML)
3mm × 3mm DFN (ML)
P3 · p03_fig01P3
MIC37300-3.3WR (SPAK-3) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P3 · p03_fig04P3
MIC37300-3.3WR (SPAK-3) — Datasheet Page 3 (p03_fig04)
Datasheet Page 3 (p03_fig04)
P14 · p14_fig011950×1613px
MIC37300-3.3WR (SPAK-3) — ePad SOIC-8 (ME)
ePad SOIC-8 (ME)
P11 · p11_fig01All Packages in PDF
MIC37300-3.3WR (SPAK-3) — 5-Pin TO-263-5 (U)
5-Pin TO-263-5 (U)
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MIC37300-3.3WR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC37300-3.3WR (SPAK-3) is a 3-pin standard electronic & interconnect component featuring a 9.50 × 8.10 × 2.00 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 2.25V to 6.0V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.25V to 6.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.50 × 8.10 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (SPAK-3)
Pin Count & Lead PitchN / e
3 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol4 auto-grouped pins
OK
IPC-7351B Land Pattern4 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteEPAD 8.45×8.00mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC37300 / MIC37302 (4)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SPAK-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.50 × 8.10 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=2.54mm
Pad Size (W × L)Level B
1.00 × 1.20 mm
Pins / Total PadsTopology
4P / 4Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SPAK-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC37300-3.3WR (SPAK-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC37300-3.3WR (SPAK-3)?

Manufactured by MICROCHIP, the MIC37300-3.3WR is housed in a SPAK-3 package with 4 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 2.25V to 6.0V. Key pins include: 1 (VIN: Regulated Power Output (VIN — 2.25V to 6.0V)), 2 (GND: Ground Reference Pin (GND)), 3 (VOUT: Regulated Power Output (VOUT — 2.25V to 6.0V)), 4 (TAB: Multiplexed I/O & Peripheral Pin TAB (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC37300-3.3WR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC37300-3.3WR (SPAK-3) has a nominal body envelope of 8.10 × 9.50 mm, pitch e = 2.54 mm, and 4 copper pads plus a central exposed thermal pad (EPAD) of 8.45 × 8.00 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC37300-3.3WR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC37300-3.3WR (MICROCHIP, SPAK-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (4 pins) & MIC37300 / MIC37302 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VINPower_OutRegulated power output rail (VIN) operating in the 2.25V to 6.0V domain (Max rating: 6.0V).
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.25V to 6.0V domain (Max rating: 6.0V).
4TABDigital_IOSignal terminal TAB (I/O, 2.25V to 6.0V domain). Multiplexed alternate functions: TAB. Supported peripheral buses: General.