MIC37300-1.65WR-TR (SPAK-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC37300-1.65WR-TR

MICROCHIPSPAK-3 · 4 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC37300-1.65WR-TR (SPAK-3)1VIN2GND4TAB3VOUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
4321E=9.50mm · Pitch e=2.54mmD=8.10mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 9.50mm × 8.10mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (4/4)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VINPowerRegulated Power Output (VIN — 3.0V to 2.5V)
2GNDGNDGround Reference Pin (GND)
3VOUTPowerRegulated Power Output (VOUT — 3.0V to 2.5V)
4TABI/OMultiplexed I/O & Peripheral Pin TAB (General)
PIN 1 VIN
Power
Regulated Power Output (VIN — 3.0V to 2.5V)
Design note: Input voltage that supplies current to the output power device.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC37300-1.65WR-TR (SPAK-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC37300-1.65WR-TR (SPAK-3) - 2. Standard Pinout (Top View)
True package pinout (4 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC37300-1.65WR-TR (SPAK-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC37300-1.65WR-TR (SPAK-3) - 4. Package Dimensions (D×E×A)
SPAK-3 · 9.50×8.10mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC37300-1.65WR-TR (SPAK-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (4 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC37300-1.65WR-TR (SPAK-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MIC37300 / MIC37302
P1 · p01_fig01376×200px
MIC37300-1.65WR-TR (SPAK-3) — 3.0A, Low Voltage μCap LDO Regulator
3.0A, Low Voltage μCap LDO Regulator
P2 · p02_fig01644×309px
MIC37300-1.65WR-TR (SPAK-3) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig02861×327px
MIC37300-1.65WR-TR (SPAK-3) — 2.5V Regulator Adjustable Regulator
2.5V Regulator Adjustable Regulator
P2 · p02_fig01P2
MIC37300-1.65WR-TR (SPAK-3) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig01500×254px
MIC37300-1.65WR-TR (SPAK-3) — TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
P3 · p03_fig02455×254px
MIC37300-1.65WR-TR (SPAK-3) — TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
P3 · p03_fig03605×321px
MIC37300-1.65WR-TR (SPAK-3) — TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
P3 · p03_fig04646×317px
MIC37300-1.65WR-TR (SPAK-3) — TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
TO-263-5 (U) (Top View) ePad SOIC-8 (ME) (Top View)
P3 · p03_fig05477×299px
MIC37300-1.65WR-TR (SPAK-3) — 3 mm x 3 mm (DFN) (Top View)
3 mm x 3 mm (DFN) (Top View)
P3 · p03_fig04P3
MIC37300-1.65WR-TR (SPAK-3) — Datasheet Page 3 (p03_fig04)
Datasheet Page 3 (p03_fig04)
P15 · p15_fig011777×2336px
MIC37300-1.65WR-TR (SPAK-3) — 5.1 Package Marking Information
5.1 Package Marking Information
P16 · p16_fig011565×1639px
MIC37300-1.65WR-TR (SPAK-3) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MIC37300-1.65WR-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC37300-1.65WR-TR (SPAK-3) is a 3-pin standard electronic & interconnect component featuring a 9.50 × 8.10 × 2.00 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 3.0V to 2.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 2.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.50 × 8.10 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (SPAK-3)
Pin Count & Lead PitchN / e
3 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol4 auto-grouped pins
OK
IPC-7351B Land Pattern4 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteEPAD 8.45×8.00mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SPAK-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.50 × 8.10 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=2.54mm
Pad Size (W × L)Level B
1.00 × 1.20 mm
Pins / Total PadsTopology
4P / 4Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SPAK-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC37300-1.65WR-TR (SPAK-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC37300-1.65WR-TR (SPAK-3)?

Manufactured by MICROCHIP, the MIC37300-1.65WR-TR is housed in a SPAK-3 package with 4 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 3.0V to 2.5V. Key pins include: 1 (VIN: Regulated Power Output (VIN — 3.0V to 2.5V)), 2 (GND: Ground Reference Pin (GND)), 3 (VOUT: Regulated Power Output (VOUT — 3.0V to 2.5V)), 4 (TAB: Multiplexed I/O & Peripheral Pin TAB (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC37300-1.65WR-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC37300-1.65WR-TR (SPAK-3) has a nominal body envelope of 8.10 × 9.50 mm, pitch e = 2.54 mm, and 4 copper pads plus a central exposed thermal pad (EPAD) of 8.45 × 8.00 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC37300-1.65WR-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC37300-1.65WR-TR (MICROCHIP, SPAK-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (4 pins) & MIC37300 / MIC37302 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VINPower_OutRegulated power output rail (VIN) operating in the 3.0V to 2.5V domain (Max rating: 3.0V).
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3VOUTPower_OutRegulated power output rail (VOUT) operating in the 3.0V to 2.5V domain (Max rating: 3.0V).
4TABDigital_IOSignal terminal TAB (I/O, 3.0V to 2.5V domain). Multiplexed alternate functions: TAB. Supported peripheral buses: General.