ChipDocs.org
⌘K
2284 PARTSUpload PDF
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2536-2BMM TS

MICROCHIPID: C17436307MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)1ENA2FLGA3FLGB4ENB8OUTA7IN6GND5OUTBGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENAI/OMultiplexed I/O & Peripheral Pin ENA (General)
2FLGAI/OMultiplexed I/O & Peripheral Pin FLGA (General)
3FLGBI/OMultiplexed I/O & Peripheral Pin FLGB (General)
4ENBI/OMultiplexed I/O & Peripheral Pin ENB (General)
5OUTBI/OMultiplexed I/O & Peripheral Pin OUTB (General)
6GNDGNDGround Reference Pin (GND)
7INI/OMultiplexed I/O & Peripheral Pin IN (General)
8OUTAI/OMultiplexed I/O & Peripheral Pin OUTA (General)
PIN 1 ENA
I/O
Multiplexed I/O & Peripheral Pin ENA (General)
Design note: Signal terminal ENA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ENA. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: MIC2536-2BMM TS (MICROCHIP · MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 4. Package Dimensions (D×E×A)
MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) - 6. Application Schematic
Typical Application SchematicExpand ›

Technical Specifications & Part Details (MIC2536-2BMM TS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1)?

Manufactured by MICROCHIP, the MIC2536-2BMM TS is housed in a MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1 package with 8 pins and a 0.65 mm lead pitch. Key pins include: 1 (ENA: Multiplexed I/O & Peripheral Pin ENA (General)), 2 (FLGA: Multiplexed I/O & Peripheral Pin FLGA (General)), 3 (FLGB: Multiplexed I/O & Peripheral Pin FLGB (General)), 4 (ENB: Multiplexed I/O & Peripheral Pin ENB (General)), 5 (OUTB: Multiplexed I/O & Peripheral Pin OUTB (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC2536-2BMM TS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2536-2BMM TS (MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2536-2BMM TS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2536-2BMM TS (MICROCHIP, MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-1) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC2536 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENADigital_IOSignal terminal ENA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ENA. Supported peripheral buses: General.
2FLGADigital_IOSignal terminal FLGA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: FLGA. Supported peripheral buses: General.
3FLGBDigital_IOSignal terminal FLGB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: FLGB. Supported peripheral buses: General.
4ENBDigital_IOSignal terminal ENB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ENB. Supported peripheral buses: General.
5OUTBDigital_IOSignal terminal OUTB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OUTB. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7INDigital_IOSignal terminal IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
8OUTADigital_IOSignal terminal OUTA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OUTA. Supported peripheral buses: General.
ExplorePartsPackagesMFRsUpload