ZL40203LDG1 (QFN-16-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ZL40203LDG1

MICROCHIPQFN-16-EP(3x3) · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ZL40203LDG1 (QFN-16-EP(3x3))1clk p, clk n2vt3ctrl4clk p, clk n5gnd6IO37NC8vdd9IO417EP16gnd15IO1714IO1613vdd12IO711IO610IO5Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1clk p, clk n,__I/OMultiplexed I/O & Peripheral Pin clk p, clk n,__ (General)
2vtI/OMultiplexed I/O & Peripheral Pin vt (General)
3ctrlI/OMultiplexed I/O & Peripheral Pin ctrl (General)
4clk p, clk n,__I/OMultiplexed I/O & Peripheral Pin clk p, clk n,__ (General)
5gndGNDGround Reference Pin (gnd)
6IO3I/OGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNCNo Connect (Leave Floating)
8vddPowerPower Supply Input (vdd — 3.3V / 5.0V Standard Logic)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13vddPowerPower Supply Input (vdd — 3.3V / 5.0V Standard Logic)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16gndGNDGround Reference Pin (gnd)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 clk p, clk n,__
I/O
Multiplexed I/O & Peripheral Pin clk p, clk n,__ (General)
Design note: Differential Input (Analog Input). Differential (or singled ended) input signals. For all input signal configuration see section 3.1, “Clock Inputs“ on page 7
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ZL40203LDG1 (QFN-16-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ZL40203LDG1 (QFN-16-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ZL40203LDG1 (QFN-16-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ZL40203LDG1 (QFN-16-EP(3x3)) - 4. Package Dimensions (D×E×A)
QFN-16-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ZL40203LDG1 (QFN-16-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
ZL40203LDG1 (QFN-16-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for ZL40203
P1 · p01_fig01814×156px
ZL40203LDG1 (QFN-16-EP(3x3)) — Features
Features
P1 · p01_fig021418×1137px
ZL40203LDG1 (QFN-16-EP(3x3)) — Figure 1 - Functional Block Diagram
Figure 1 - Functional Block Diagram
P16 · p16_fig011904×827px
ZL40203LDG1 (QFN-16-EP(3x3)) — Figure 19 - Decoupling Connections for Power Pins
Figure 19 - Decoupling Connections for Power Pins
P16 · p16_fig01P16
ZL40203LDG1 (QFN-16-EP(3x3)) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P24 · p24_fig011916×2535px
ZL40203LDG1 (QFN-16-EP(3x3)) — 24
24
P25 · p25_fig011978×635px
ZL40203LDG1 (QFN-16-EP(3x3)) — © 2014 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. | ZL40203
© 2014 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. | ZL40203

Technical Specifications & Part Details (ZL40203LDG1)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ZL40203LDG1 (QFN-16-EP(3x3)) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
750 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-16-EP(3x3))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-16-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ZL40203LDG1 (QFN-16-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ZL40203LDG1 (QFN-16-EP(3x3))?

Manufactured by MICROCHIP, the ZL40203LDG1 is housed in a QFN-16-EP(3x3) package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (clk p, clk n,__: Multiplexed I/O & Peripheral Pin clk p, clk n,__ (General)), 2 (vt: Multiplexed I/O & Peripheral Pin vt (General)), 3 (ctrl: Multiplexed I/O & Peripheral Pin ctrl (General)), 4 (clk p, clk n,__: Multiplexed I/O & Peripheral Pin clk p, clk n,__ (General)), 5 (gnd: Ground Reference Pin (gnd)), 6 (IO3: GPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)).

What are the IPC-7351B PCB Footprint dimensions for ZL40203LDG1?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ZL40203LDG1 (QFN-16-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ZL40203LDG1?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ZL40203LDG1 (MICROCHIP, QFN-16-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & ZL40203 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1clk p, clk n,__Digital_IOSignal terminal clk p, clk n,__ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: clk p, clk n,__. Supported peripheral buses: General.
2vtDigital_IOSignal terminal vt (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: vt. Supported peripheral buses: General.
3ctrlDigital_IOSignal terminal ctrl (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ctrl. Supported peripheral buses: General.
4clk p, clk n,__Digital_IOSignal terminal clk p, clk n,__ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: clk p, clk n,__. Supported peripheral buses: General.
5gndGND0V electrical ground return terminal (gnd) for internal core logic, I/O drivers, and analog sub-blocks.
6IO3Digital_IOGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNo_ConnectNo Connect (Leave Floating)
8vddPower_InPrimary positive power supply input (vdd) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13vddPower_InPrimary positive power supply input (vdd) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16gndGND0V electrical ground return terminal (gnd) for internal core logic, I/O drivers, and analog sub-blocks.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.