UTC2000T/MG (QFN-16-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

UTC2000T/MG

MICROCHIPQFN-16-EP(3x3) · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · UTC2000T/MG (QFN-16-EP(3x3))1OCS#2CFG_SEL3ENABLE4FAULT_IND5IO26CC27CC18IO09IO417EP16VDD15NC14NC13VSS12VMON11PLUG ORIENTA10PPC EN/3.0A Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OCS#I/OMultiplexed I/O & Peripheral Pin OCS# (General)
2CFG_SELI/OMultiplexed I/O & Peripheral Pin CFG_SEL (General)
3ENABLEI/OMultiplexed I/O & Peripheral Pin ENABLE (General)
4FAULT_INDI/OMultiplexed I/O & Peripheral Pin FAULT_IND (General)
5IO2I/OGPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1
6CC2I/OMultiplexed I/O & Peripheral Pin CC2 (General)
7CC1I/OMultiplexed I/O & Peripheral Pin CC1 (General)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10PPC EN/3.0A IND#__I/OMultiplexed I/O & Peripheral Pin PPC EN/3.0A IND#__ (General)
11PLUG ORIENTATION#_I/OMultiplexed I/O & Peripheral Pin PLUG ORIENTATION#_ (General)
12VMONI/OMultiplexed I/O & Peripheral Pin VMON (General)
13VSSGNDGround Reference Pin (VSS)
14NCI/OMultiplexed I/O & Peripheral Pin NC (General)
15NCI/OMultiplexed I/O & Peripheral Pin NC (General)
16VDDPowerPower Supply Input (VDD — 4.5V to 5.5V)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 OCS#
I/O
Multiplexed I/O & Peripheral Pin OCS# (General)
Design note: Signal terminal OCS# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: OCS#. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
UTC2000T/MG (QFN-16-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
UTC2000T/MG (QFN-16-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
UTC2000T/MG (QFN-16-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
UTC2000T/MG (QFN-16-EP(3x3)) - 4. Package Dimensions (D×E×A)
QFN-16-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
UTC2000T/MG (QFN-16-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
UTC2000T/MG (QFN-16-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for UTC2000
P1 · p01_fig01376×200px
UTC2000T/MG (QFN-16-EP(3x3)) — Basic USB Type-C TM Controller
Basic USB Type-C TM Controller
P7 · p07_fig011050×586px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 2-1: PIN ASSIGNMENTS
FIGURE 2-1: PIN ASSIGNMENTS
P7 · p07_fig01P7
UTC2000T/MG (QFN-16-EP(3x3)) — Datasheet Page 7 (p07_fig01)
Datasheet Page 7 (p07_fig01)
P29 · p29_fig011778×1308px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 5-7: USB 3.0/USB 3.1 APPLICATION SCHEMATIC
FIGURE 5-7: USB 3.0/USB 3.1 APPLICATION SCHEMATIC
P30 · p30_fig011778×1089px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 5-8: USB 2.0 APPLICATION SCHEMATIC
FIGURE 5-8: USB 2.0 APPLICATION SCHEMATIC
P30 · p30_fig021780×1249px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 5-9: USB 2.0 WITH AUDIO ADAPTER APPLICATION SCHEMATIC
FIGURE 5-9: USB 2.0 WITH AUDIO ADAPTER APPLICATION SCHEMATIC
P31 · p31_fig011778×1102px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 5-10: 3.0A CHARGING PORT (AC ADAPTER) APPLICATION SCHEMATIC
FIGURE 5-10: 3.0A CHARGING PORT (AC ADAPTER) APPLICATION SCHEMATIC
P31 · p31_fig021782×1002px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 5-11: UFP DEVICE APPLICATION SCHEMATIC
FIGURE 5-11: UFP DEVICE APPLICATION SCHEMATIC
P31 · p31_fig02P31
UTC2000T/MG (QFN-16-EP(3x3)) — Datasheet Page 31 (p31_fig02)
Datasheet Page 31 (p31_fig02)
P33 · p33_fig011567×1232px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 6-1: 16-PIN QFN PACKAGE MARKING INFORMATION
FIGURE 6-1: 16-PIN QFN PACKAGE MARKING INFORMATION
P33 · p33_fig01P33
UTC2000T/MG (QFN-16-EP(3x3)) — Datasheet Page 33 (p33_fig01)
Datasheet Page 33 (p33_fig01)
P36 · p36_fig011777×2108px
UTC2000T/MG (QFN-16-EP(3x3)) — FIGURE 6-4: 16-PIN QFN PACKAGE (LAND PATTERN)
FIGURE 6-4: 16-PIN QFN PACKAGE (LAND PATTERN)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (UTC2000T/MG)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:UTC2000T/MG (QFN-16-EP(3x3)) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 4.5V to 5.5V supply operation across 0°C to +70°C with integrated USB, ADC interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-16-EP(3x3))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, ADC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.10×1.10mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-16-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — UTC2000T/MG (QFN-16-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of UTC2000T/MG (QFN-16-EP(3x3))?

Manufactured by MICROCHIP, the UTC2000T/MG is housed in a QFN-16-EP(3x3) package with 17 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 4.5V to 5.5V. Key pins include: 1 (OCS#: Multiplexed I/O & Peripheral Pin OCS# (General)), 2 (CFG_SEL: Multiplexed I/O & Peripheral Pin CFG_SEL (General)), 3 (ENABLE: Multiplexed I/O & Peripheral Pin ENABLE (General)), 4 (FAULT_IND: Multiplexed I/O & Peripheral Pin FAULT_IND (General)), 5 (IO2: GPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1), 6 (CC2: Multiplexed I/O & Peripheral Pin CC2 (General)).

What are the IPC-7351B PCB Footprint dimensions for UTC2000T/MG?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), UTC2000T/MG (QFN-16-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.10 × 1.10 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for UTC2000T/MG?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for UTC2000T/MG (MICROCHIP, QFN-16-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & UTC2000 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OCS#Digital_IOSignal terminal OCS# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: OCS#. Supported peripheral buses: General.
2CFG_SELDigital_IOSignal terminal CFG_SEL (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: CFG_SEL. Supported peripheral buses: General.
3ENABLEDigital_IOSignal terminal ENABLE (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: ENABLE. Supported peripheral buses: General.
4FAULT_INDDigital_IOSignal terminal FAULT_IND (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: FAULT_IND. Supported peripheral buses: General.
5IO2Digital_IOGPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1
6CC2Digital_IOSignal terminal CC2 (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: CC2. Supported peripheral buses: General.
7CC1Digital_IOSignal terminal CC1 (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: CC1. Supported peripheral buses: General.
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10PPC EN/3.0A IND#__Digital_IOSignal terminal PPC EN/3.0A IND#__ (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: PPC EN/3.0A IND#__. Supported peripheral buses: General.
11PLUG ORIENTATION#_Digital_IOSignal terminal PLUG ORIENTATION#_ (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: PLUG ORIENTATION#_. Supported peripheral buses: General.
12VMONDigital_IOSignal terminal VMON (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: VMON. Supported peripheral buses: General.
13VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
14NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
15NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
16VDDPower_InPrimary positive power supply input (VDD) operating in the 4.5V to 5.5V domain (Max rating: 5.5V).
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.