UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

UCS1001-4-BP-TR

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · UCS1001-4-BP-TR (QFN-20-EP(4x4))1M12M23VBUS14VBUS25ILIM6SEL7VS18VS29VDD10PWR_EN11LATCH21EP20GND19EM_EN18A_DET#17DPOUT16DMOUT15DMIN14DPIN13ALERT#12S0Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1M1I/OMultiplexed I/O & Peripheral Pin M1 (General)
2M2I/OMultiplexed I/O & Peripheral Pin M2 (General)
3VBUS1PowerPower Supply Input (VBUS1 — 2.9 V to 5.5 V)
4VBUS2PowerPower Supply Input (VBUS2 — 2.9 V to 5.5 V)
5ILIMI/OMultiplexed I/O & Peripheral Pin ILIM (General)
6SELI/OMultiplexed I/O & Peripheral Pin SEL (General)
7VS1I/OMultiplexed I/O & Peripheral Pin VS1 (General)
8VS2I/OMultiplexed I/O & Peripheral Pin VS2 (General)
9VDDPowerPower Supply Input (VDD — 2.9 V to 5.5 V)
10PWR_ENI/OMultiplexed I/O & Peripheral Pin PWR_EN (General)
11LATCHI/OMultiplexed I/O & Peripheral Pin LATCH (General)
12S0I/OMultiplexed I/O & Peripheral Pin S0 (General)
13ALERT#I/OMultiplexed I/O & Peripheral Pin ALERT# (General)
14DPINI/OMultiplexed I/O & Peripheral Pin DPIN (USB)
15DMINI/OMultiplexed I/O & Peripheral Pin DMIN (USB)
16DMOUTI/OMultiplexed I/O & Peripheral Pin DMOUT (USB)
17DPOUTI/OMultiplexed I/O & Peripheral Pin DPOUT (USB)
18A_DET#I/OMultiplexed I/O & Peripheral Pin A_DET# (General)
19EM_ENI/OMultiplexed I/O & Peripheral Pin EM_EN (General)
20GNDGNDGround Reference Pin (GND)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 M1
I/O
Multiplexed I/O & Peripheral Pin M1 (General)
Design note: Signal terminal M1 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: M1. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
UCS1001-4-BP-TR (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for UCS1001
P1 · p01_fig01831×151px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — UCS1001-3 UCS1001-4
UCS1001-3 UCS1001-4
P1 · p01_fig02434×226px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — USB Port Power Controller with Charger Emulation
USB Port Power Controller with Charger Emulation
P2 · p02_fig011716×1174px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Datasheet
Datasheet
P10 · p10_fig011080×1085px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Figure 2.1 UCS1001-3 Pin Diagram
Figure 2.1 UCS1001-3 Pin Diagram
P11 · p11_fig011080×1089px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Figure 2.2 UCS1001-4 Pin Diagram
Figure 2.2 UCS1001-4 Pin Diagram
P11 · p11_fig021202×1003px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Figure 2.2 UCS1001-4 Pin Diagram
Figure 2.2 UCS1001-4 Pin Diagram
P11 · p11_fig01P11
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P49 · p49_fig011668×1374px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Figure 9.1 UCS1001 Package View
Figure 9.1 UCS1001 Package View
P50 · p50_fig011312×1031px
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Figure 9.2 UCS1001 Package Dimensions and Notes
Figure 9.2 UCS1001 Package Dimensions and Notes
P50 · p50_fig01P50
UCS1001-4-BP-TR (QFN-20-EP(4x4)) — Datasheet Page 50 (p50_fig01)
Datasheet Page 50 (p50_fig01)

Technical Specifications & Part Details (UCS1001-4-BP-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:UCS1001-4-BP-TR (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.9 V to 5.5 V supply operation across -40 °C to +85 °C with integrated USB interfaces.
Operating Supply VoltageV_CC / V_DD
2.9 V to 5.5 V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40 °C to +85 °C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — UCS1001 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — UCS1001-4-BP-TR (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of UCS1001-4-BP-TR (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the UCS1001-4-BP-TR is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.9 V to 5.5 V. Key pins include: 1 (M1: Multiplexed I/O & Peripheral Pin M1 (General)), 2 (M2: Multiplexed I/O & Peripheral Pin M2 (General)), 3 (VBUS1: Power Supply Input (VBUS1 — 2.9 V to 5.5 V)), 4 (VBUS2: Power Supply Input (VBUS2 — 2.9 V to 5.5 V)), 5 (ILIM: Multiplexed I/O & Peripheral Pin ILIM (General)), 6 (SEL: Multiplexed I/O & Peripheral Pin SEL (General)).

What are the IPC-7351B PCB Footprint dimensions for UCS1001-4-BP-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), UCS1001-4-BP-TR (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for UCS1001-4-BP-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for UCS1001-4-BP-TR (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & UCS1001 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1M1Digital_IOSignal terminal M1 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: M1. Supported peripheral buses: General.
2M2Digital_IOSignal terminal M2 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: M2. Supported peripheral buses: General.
3VBUS1Power_InPrimary positive power supply input (VBUS1) operating in the 2.9 V to 5.5 V domain (Max rating: 5.5V).
4VBUS2Power_InPrimary positive power supply input (VBUS2) operating in the 2.9 V to 5.5 V domain (Max rating: 5.5V).
5ILIMDigital_IOSignal terminal ILIM (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: ILIM. Supported peripheral buses: General.
6SELDigital_IOSignal terminal SEL (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: SEL. Supported peripheral buses: General.
7VS1Digital_IOSignal terminal VS1 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: VS1. Supported peripheral buses: General.
8VS2Digital_IOSignal terminal VS2 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: VS2. Supported peripheral buses: General.
9VDDPower_InPrimary positive power supply input (VDD) operating in the 2.9 V to 5.5 V domain (Max rating: 5.5V).
10PWR_ENDigital_IOSignal terminal PWR_EN (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: PWR_EN. Supported peripheral buses: General.
11LATCHDigital_IOSignal terminal LATCH (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: LATCH. Supported peripheral buses: General.
12S0Digital_IOSignal terminal S0 (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: S0. Supported peripheral buses: General.
13ALERT#Digital_IOSignal terminal ALERT# (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: ALERT#. Supported peripheral buses: General.
14DPINDigital_IOSignal terminal DPIN (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: DPIN. Supported peripheral buses: USB.
15DMINDigital_IOSignal terminal DMIN (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: DMIN. Supported peripheral buses: USB.
16DMOUTDigital_IOSignal terminal DMOUT (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: DMOUT. Supported peripheral buses: USB.
17DPOUTDigital_IOSignal terminal DPOUT (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: DPOUT. Supported peripheral buses: USB.
18A_DET#Digital_IOSignal terminal A_DET# (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: A_DET#. Supported peripheral buses: General.
19EM_ENDigital_IOSignal terminal EM_EN (I/O, 2.9 V to 5.5 V domain). Multiplexed alternate functions: EM_EN. Supported peripheral buses: General.
20GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.