TC7660CPA (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC7660CPA

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC7660CPA (PDIP-8)1NC2CAP+3GND4CAP-8V+7OSC6LV5V OUTGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2CAP+I/OMultiplexed I/O & Peripheral Pin CAP+ (General)
3GNDGNDGround Reference Pin (GND)
4CAP-I/OMultiplexed I/O & Peripheral Pin CAP- (General)
5V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
6LVI/OMultiplexed I/O & Peripheral Pin LV (General)
7OSCI/OMultiplexed I/O & Peripheral Pin OSC (RTC/CLK)
8V+I/OMultiplexed I/O & Peripheral Pin V+ (General)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: No connection
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC7660CPA (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC7660CPA (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC7660CPA (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC7660CPA (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC7660CPA (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC7660CPA (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for TC7660
P1 · p01_fig04EXACT PACKAGE
TC7660CPA (PDIP-8) —  2002-2011 Microchip Technology Inc. DS21465C-page 1 | The TC7660 is available in 8-Pin PDIP, 8-Pin Small Outline (SOIC) and 8-Pin CERDIP packages in commercial and extended temperature ranges. Functional Block Diagram | TC7660 | GND | Int
 2002-2011 Microchip Technology Inc. DS21465C-page 1 | The TC7660 is available in 8-Pin PDIP, 8-Pin Small Outline (SOIC) and 8-Pin CERDIP packages in commercial and extended temperature ranges. Functional Block Diagram | TC7660 | GND | Int
P1 · p01_fig02376×200px
TC7660CPA (PDIP-8) — Charge Pump DC-to-DC Voltage Converter
Charge Pump DC-to-DC Voltage Converter
P1 · p01_fig031777×876px
TC7660CPA (PDIP-8) — • RS-232 Negative Power Supply • Simple Conversion of +5V to ±5V Supplies • Voltage Multiplication VOUT = ± n V+
• RS-232 Negative Power Supply • Simple Conversion of +5V to ±5V Supplies • Voltage Multiplication VOUT = ± n V+
P2 · p02_fig01867×575px
TC7660CPA (PDIP-8) — FIGURE 1-1: TC7660 Test Circuit.
FIGURE 1-1: TC7660 Test Circuit.
P7 · p07_fig011777×653px
TC7660CPA (PDIP-8) — FIGURE 5-1: Simple Negative Converter.
FIGURE 5-1: Simple Negative Converter.
P7 · p07_fig021583×1164px
TC7660CPA (PDIP-8) — FIGURE 5-1: Simple Negative Converter.
FIGURE 5-1: Simple Negative Converter.
P7 · p07_fig031389×588px
TC7660CPA (PDIP-8) — FIGURE 5-2: Paralleling Devices Lowers Output Impedance.
FIGURE 5-2: Paralleling Devices Lowers Output Impedance.
P7 · p07_fig02P7
TC7660CPA (PDIP-8) — Datasheet Page 7 (p07_fig02)
Datasheet Page 7 (p07_fig02)
P8 · p08_fig011777×1045px
TC7660CPA (PDIP-8) — FIGURE 5-4: External Clocking.
FIGURE 5-4: External Clocking.
P8 · p08_fig02867×557px
TC7660CPA (PDIP-8) — FIGURE 5-4: External Clocking.
FIGURE 5-4: External Clocking.
P9 · p09_fig011777×776px
TC7660CPA (PDIP-8) — FIGURE 5-7: Combined Negative Converter and Positive Multiplier. 5.7 Efficient Positive Voltage Multiplication/Conversion
FIGURE 5-7: Combined Negative Converter and Positive Multiplier. 5.7 Efficient Positive Voltage Multiplication/Conversion
P9 · p09_fig02867×485px
TC7660CPA (PDIP-8) — FIGURE 5-8: Positive Voltage Conversion.
FIGURE 5-8: Positive Voltage Conversion.
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (TC7660CPA)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC7660CPA (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.50 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 0°C to +70°C with integrated UART, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
10 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.50 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC7660CPA (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC7660CPA (PDIP-8)?

Manufactured by MICROCHIP, the TC7660CPA is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (CAP+: Multiplexed I/O & Peripheral Pin CAP+ (General)), 3 (GND: Ground Reference Pin (GND)), 4 (CAP-: Multiplexed I/O & Peripheral Pin CAP- (General)), 5 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 6 (LV: Multiplexed I/O & Peripheral Pin LV (General)).

What are the IPC-7351B PCB Footprint dimensions for TC7660CPA?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC7660CPA (PDIP-8) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC7660CPA?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC7660CPA (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC7660 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2CAP+Digital_IOSignal terminal CAP+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CAP+. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4CAP-Digital_IOSignal terminal CAP- (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CAP-. Supported peripheral buses: General.
5V OUTDigital_IOSignal terminal V OUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
6LVDigital_IOSignal terminal LV (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LV. Supported peripheral buses: General.
7OSCDigital_IOSignal terminal OSC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OSC. Supported peripheral buses: RTC/CLK.
8V+Digital_IOSignal terminal V+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V+. Supported peripheral buses: General.