TC72-2.8MUATR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC72-2.8MUATR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC72-2.8MUATR (MSOP-8)1NC2CE3SCK4GND8VDD7NC6SDI5SDOGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2CEI/OMultiplexed I/O & Peripheral Pin CE (General)
3SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
4GNDGNDGround Reference Pin (GND)
5SDOI/OMultiplexed I/O & Peripheral Pin SDO (General)
6SDII/OMultiplexed I/O & Peripheral Pin SDI (General)
7NCI/OMultiplexed I/O & Peripheral Pin NC (General)
8VDDPowerPower Supply Input (VDD — 2.65V to 5.5V)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: No internal connection
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC72-2.8MUATR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC72-2.8MUATR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC72-2.8MUATR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC72-2.8MUATR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC72-2.8MUATR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC72-2.8MUATR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for TC72
P1 · p01_fig01377×200px
TC72-2.8MUATR (MSOP-8) — Digital Temperature Sensor with SPI Interface
Digital Temperature Sensor with SPI Interface
P1 · p01_fig021777×1198px
TC72-2.8MUATR (MSOP-8) — Typical Applications
Typical Applications
P1 · p01_fig02P1
TC72-2.8MUATR (MSOP-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P17 · p17_fig011777×1085px
TC72-2.8MUATR (MSOP-8) — FIGURE 6-1: Typical Application.
FIGURE 6-1: Typical Application.
P18 · p18_fig011407×743px
TC72-2.8MUATR (MSOP-8) — TC72
TC72
P18 · p18_fig021166×359px
TC72-2.8MUATR (MSOP-8) — 8-Lead DFN Example: | XXXXXXXX MYWW NNN | 7228 M109 256
8-Lead DFN Example: | XXXXXXXX MYWW NNN | 7228 M109 256
P18 · p18_fig031361×616px
TC72-2.8MUATR (MSOP-8) — Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. | 3 e | 3 e
Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. | 3 e | 3 e
P18 · p18_fig01P18
TC72-2.8MUATR (MSOP-8) — Datasheet Page 18 (p18_fig01)
Datasheet Page 18 (p18_fig01)

Technical Specifications & Part Details (TC72-2.8MUATR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC72-2.8MUATR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.65V to 5.5V supply operation across -40°C to +85°C with integrated SPI, ADC interfaces.
Operating Supply VoltageV_CC / V_DD
2.65V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
7.5 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, ADC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC72-2.8MUATR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC72-2.8MUATR (MSOP-8)?

Manufactured by MICROCHIP, the TC72-2.8MUATR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.65V to 5.5V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (CE: Multiplexed I/O & Peripheral Pin CE (General)), 3 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)), 4 (GND: Ground Reference Pin (GND)), 5 (SDO: Multiplexed I/O & Peripheral Pin SDO (General)), 6 (SDI: Multiplexed I/O & Peripheral Pin SDI (General)).

What are the IPC-7351B PCB Footprint dimensions for TC72-2.8MUATR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC72-2.8MUATR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC72-2.8MUATR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC72-2.8MUATR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC72 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2CEDigital_IOSignal terminal CE (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: CE. Supported peripheral buses: General.
3SCKDigital_IOSignal terminal SCK (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDODigital_IOSignal terminal SDO (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: SDO. Supported peripheral buses: General.
6SDIDigital_IOSignal terminal SDI (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: SDI. Supported peripheral buses: General.
7NCNCSignal terminal NC (I/O, 2.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.65V to 5.5V domain (Max rating: 5.5V).