TC650AEVUATR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC650AEVUATR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC650AEVUATR (MSOP-8)1VDD2NC3SHDN4GND8PWM7GND6T OVER5NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 2.8V – 5.5V)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
4GNDGNDGround Reference Pin (GND)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6T OVERI/OMultiplexed I/O & Peripheral Pin T OVER (General)
7GNDGNDGround Reference Pin (GND)
8PWMI/OMultiplexed I/O & Peripheral Pin PWM (PWM)
PIN 1 VDD
Power
Power Supply Input (VDD — 2.8V – 5.5V)
Design note: Power Supply Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC650AEVUATR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC650AEVUATR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC650AEVUATR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC650AEVUATR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC650AEVUATR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC650AEVUATR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for TC650
P1 · p01_fig01EXACT PACKAGE
TC650AEVUATR (MSOP-8) — The TC650/TC651 are easy to use, require no software overhead and are, therefore, the ideal choice for implementing thermal management in a variety of systems. | Package Type | 1 8 | 2 7 | 3 6 | 4 5 | NC | VDD PWM | TOVER | NC GND | 8-Pin M
The TC650/TC651 are easy to use, require no software overhead and are, therefore, the ideal choice for implementing thermal management in a variety of systems. | Package Type | 1 8 | 2 7 | 3 6 | 4 5 | NC | VDD PWM | TOVER | NC GND | 8-Pin M
P2 · p02_fig011331×867px
TC650AEVUATR (MSOP-8) — Typical Application Circuit
Typical Application Circuit
P2 · p02_fig01P2
TC650AEVUATR (MSOP-8) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P9 · p09_fig011285×866px
TC650AEVUATR (MSOP-8) — FIGURE 5-1: Reducing Switching Noise.
FIGURE 5-1: Reducing Switching Noise.
P10 · p10_fig011407×702px
TC650AEVUATR (MSOP-8) — TC650/TC651
TC650/TC651
P10 · p10_fig021777×793px
TC650AEVUATR (MSOP-8) — DS21450D-page 10  2001-2012 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
DS21450D-page 10  2001-2012 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P10 · p10_fig01P10
TC650AEVUATR (MSOP-8) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)
P11 · p11_fig011778×2496px
TC650AEVUATR (MSOP-8) —  2001-2012 Microchip Technology Inc. DS21450D-page 11 | 8-Lead Plastic Micro Small Outline Package (MS) (MSOP) | D | A | A1 | L | c | (F) | α | A2 | E1 | E | p | B | n 1 | 2 | φ | β | 5° 5° -- | Dimensions D and E1 do not include mold flas
 2001-2012 Microchip Technology Inc. DS21450D-page 11 | 8-Lead Plastic Micro Small Outline Package (MS) (MSOP) | D | A | A1 | L | c | (F) | α | A2 | E1 | E | p | B | n 1 | 2 | φ | β | 5° 5° -- | Dimensions D and E1 do not include mold flas

Technical Specifications & Part Details (TC650AEVUATR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC650AEVUATR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.8V – 5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2.8V – 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC650AEVUATR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC650AEVUATR (MSOP-8)?

Manufactured by MICROCHIP, the TC650AEVUATR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.8V – 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 2.8V – 5.5V)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (SHDN: Multiplexed I/O & Peripheral Pin SHDN (General)), 4 (GND: Ground Reference Pin (GND)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (T OVER: Multiplexed I/O & Peripheral Pin T OVER (General)).

What are the IPC-7351B PCB Footprint dimensions for TC650AEVUATR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC650AEVUATR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC650AEVUATR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC650AEVUATR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC650 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 2.8V – 5.5V domain (Max rating: 5.5V).
2NCNCSignal terminal NC (I/O, 2.8V – 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3SHDNDigital_IOSignal terminal SHDN (I/O, 2.8V – 5.5V domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5NCNCSignal terminal NC (I/O, 2.8V – 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6T OVERDigital_IOSignal terminal T OVER (I/O, 2.8V – 5.5V domain). Multiplexed alternate functions: T OVER. Supported peripheral buses: General.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8PWMDigital_IOSignal terminal PWM (I/O, 2.8V – 5.5V domain). Multiplexed alternate functions: PWM. Supported peripheral buses: PWM.