TC1044SCOA713 (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC1044SCOA713

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC1044SCOA713 (SOIC-8)1BOOST2CAP+3GND4CAP–8V+7OSC6LOW-VOLTAGE(5VOUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1BOOSTI/OMultiplexed I/O & Peripheral Pin BOOST (General)
2CAP+I/OMultiplexed I/O & Peripheral Pin CAP+ (General)
3GNDGNDGround Reference Pin (GND)
4CAP–I/OMultiplexed I/O & Peripheral Pin CAP– (General)
5VOUTPowerRegulated Power Output (VOUT — 1.5V to 12V)
6LOW-VOLTAGE(LV)I/OMultiplexed I/O & Peripheral Pin LOW-VOLTAGE(LV) (General)
7OSCI/OMultiplexed I/O & Peripheral Pin OSC (RTC/CLK)
8V+I/OMultiplexed I/O & Peripheral Pin V+ (General)
PIN 1 BOOST
I/O
Multiplexed I/O & Peripheral Pin BOOST (General)
Design note: Signal terminal BOOST (I/O, 1.5V to 12V domain). Multiplexed alternate functions: BOOST. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC1044SCOA713 (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC1044SCOA713 (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC1044SCOA713 (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC1044SCOA713 (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC1044SCOA713 (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC1044SCOA713 (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for TC1044
P1 · p01_fig02EXACT PACKAGE
TC1044SCOA713 (SOIC-8) — VOLTAGE- LEVEL TRANSLATOR 2
VOLTAGE- LEVEL TRANSLATOR 2
P9 · p09_fig01EXACT PACKAGE
TC1044SCOA713 (SOIC-8) — TC1044S
TC1044S
P10 · p10_fig01EXACT PACKAGE
TC1044SCOA713 (SOIC-8) — TC1044S
TC1044S
P1 · p01_fig011598×576px
TC1044SCOA713 (SOIC-8) — EVALUATION KIT AVAILABLE | Charge Pump DC-TO-DC Voltage Converter | FEATURES | GENERAL DESCRIPTION
EVALUATION KIT AVAILABLE | Charge Pump DC-TO-DC Voltage Converter | FEATURES | GENERAL DESCRIPTION
P1 · p01_fig032015×1291px
TC1044SCOA713 (SOIC-8) — PIN CONFIGURATION (DIP AND SOIC)
PIN CONFIGURATION (DIP AND SOIC)
P4 · p04_fig011012×595px
TC1044SCOA713 (SOIC-8) — Figure 3. Simple Negative Converter
Figure 3. Simple Negative Converter
P4 · p04_fig022017×818px
TC1044SCOA713 (SOIC-8) — Figure 3. Simple Negative Converter
Figure 3. Simple Negative Converter
P4 · p04_fig01P4
TC1044SCOA713 (SOIC-8) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P5 · p05_fig012007×993px
TC1044SCOA713 (SOIC-8) — Figure 5. Increased Output Voltage by Cascading Devices
Figure 5. Increased Output Voltage by Cascading Devices
P5 · p05_fig021057×642px
TC1044SCOA713 (SOIC-8) — Figure 6. External Clocking
Figure 6. External Clocking
P6 · p06_fig011421×661px
TC1044SCOA713 (SOIC-8) — Figure 7. Lowering Oscillator Frequency
Figure 7. Lowering Oscillator Frequency
P6 · p06_fig021016×682px
TC1044SCOA713 (SOIC-8) — Figure 9. Combined Negative Converter and Positive Multiplier Negative Voltage Generation for Display ADCs
Figure 9. Combined Negative Converter and Positive Multiplier Negative Voltage Generation for Display ADCs
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (TC1044SCOA713)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC1044SCOA713 (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.5V to 12V supply operation across 0°C to +70°C with integrated UART, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.5V to 12V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
45kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC1044SCOA713 (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC1044SCOA713 (SOIC-8)?

Manufactured by MICROCHIP, the TC1044SCOA713 is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1.5V to 12V. Key pins include: 1 (BOOST: Multiplexed I/O & Peripheral Pin BOOST (General)), 2 (CAP+: Multiplexed I/O & Peripheral Pin CAP+ (General)), 3 (GND: Ground Reference Pin (GND)), 4 (CAP–: Multiplexed I/O & Peripheral Pin CAP– (General)), 5 (VOUT: Regulated Power Output (VOUT — 1.5V to 12V)), 6 (LOW-VOLTAGE(LV): Multiplexed I/O & Peripheral Pin LOW-VOLTAGE(LV) (General)).

What are the IPC-7351B PCB Footprint dimensions for TC1044SCOA713?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC1044SCOA713 (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC1044SCOA713?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC1044SCOA713 (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC1044 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1BOOSTDigital_IOSignal terminal BOOST (I/O, 1.5V to 12V domain). Multiplexed alternate functions: BOOST. Supported peripheral buses: General.
2CAP+Digital_IOSignal terminal CAP+ (I/O, 1.5V to 12V domain). Multiplexed alternate functions: CAP+. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4CAP–Digital_IOSignal terminal CAP– (I/O, 1.5V to 12V domain). Multiplexed alternate functions: CAP–. Supported peripheral buses: General.
5VOUTPower_OutRegulated power output rail (VOUT) operating in the 1.5V to 12V domain (Max rating: 12.0V).
6LOW-VOLTAGE(LV)Digital_IOSignal terminal LOW-VOLTAGE(LV) (I/O, 1.5V to 12V domain). Multiplexed alternate functions: LOW-VOLTAGE(LV). Supported peripheral buses: General.
7OSCDigital_IOSignal terminal OSC (I/O, 1.5V to 12V domain). Multiplexed alternate functions: OSC. Supported peripheral buses: RTC/CLK.
8V+Digital_IOSignal terminal V+ (I/O, 1.5V to 12V domain). Multiplexed alternate functions: V+. Supported peripheral buses: General.