SY58601UMG-TR (MLF-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY58601UMG-TR

MICROCHIPMLF-8 · 17 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY58601UMG-TR (MLF-8)1VT02VREF-AC03VREF-AC14VT15IN16/IN17SEL8VCC9/Q17EP16/IN015IN014NC13VCC12Q11Exposedpad10GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1716151413876512111094321E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VT0I/OMultiplexed I/O & Peripheral Pin VT0 (General)
2VREF-AC0AnalogMultiplexed I/O & Peripheral Pin VREF-AC0 (General)
3VREF-AC1AnalogMultiplexed I/O & Peripheral Pin VREF-AC1 (General)
4VT1I/OMultiplexed I/O & Peripheral Pin VT1 (General)
5IN1I/OMultiplexed I/O & Peripheral Pin IN1 (General)
6/IN1I/OMultiplexed I/O & Peripheral Pin /IN1 (General)
7SELI/OMultiplexed I/O & Peripheral Pin SEL (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
9/QI/OMultiplexed I/O & Peripheral Pin /Q (General)
10GNDGNDGround Reference Pin (GND)
11ExposedpadI/OMultiplexed I/O & Peripheral Pin Exposedpad (General)
12QI/OMultiplexed I/O & Peripheral Pin Q (General)
13VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
14NCI/OMultiplexed I/O & Peripheral Pin NC (General)
15IN0I/OMultiplexed I/O & Peripheral Pin IN0 (General)
16/IN0I/OMultiplexed I/O & Peripheral Pin /IN0 (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VT0
I/O
Multiplexed I/O & Peripheral Pin VT0 (General)
Design note: Signal terminal VT0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT0. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY58601UMG-TR (MLF-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY58601UMG-TR (MLF-8) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY58601UMG-TR (MLF-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY58601UMG-TR (MLF-8) - 4. Package Dimensions (D×E×A)
MLF-8 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY58601UMG-TR (MLF-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY58601UMG-TR (MLF-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for SY58601
P10 · p10_fig01EXACT PACKAGE
SY58601UMG-TR (MLF-8) — 10 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | 8-PIN ULTRA-SMALL EPAD MicroLeadFrame® (MLF-8) | Package Notes: | 1. Package meets Level 2 qualification. | 2. All parts dry-packaged before sh
10 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | 8-PIN ULTRA-SMALL EPAD MicroLeadFrame® (MLF-8) | Package Notes: | 1. Package meets Level 2 qualification. | 2. All parts dry-packaged before sh
P1 · p01_fig012038×2811px
SY58601UMG-TR (MLF-8) — 1 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | ■Guaranteed AC performance over temperature and voltage: • DC-to >5Gbps data rate throughput • DC-to >5GHz clock fMAX • <260ps in-
1 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | ■Guaranteed AC performance over temperature and voltage: • DC-to >5Gbps data rate throughput • DC-to >5GHz clock fMAX • <260ps in-
P2 · p02_fig012039×2708px
SY58601UMG-TR (MLF-8) — 2 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Pin Number Pin Name Pin Function | 8 VCC Positive Power Supply. Bypass with 0.1µF||0.01µF low ESR capacitors as C
2 | Precision Edge® SY58601U Micrel, Inc. | M9999-082707 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Pin Number Pin Name Pin Function | 8 VCC Positive Power Supply. Bypass with 0.1µF||0.01µF low ESR capacitors as C
P2 · p02_fig01P2
SY58601UMG-TR (MLF-8) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P8 · p08_fig012038×2708px
SY58601UMG-TR (MLF-8) — Figure 3b. CML Interface (AC-Coupled)
Figure 3b. CML Interface (AC-Coupled)
P9 · p09_fig012039×2708px
SY58601UMG-TR (MLF-8) — Figure 4b. Parallel Termination (3-Resistor)
Figure 4b. Parallel Termination (3-Resistor)
P10 · p10_fig01P10
SY58601UMG-TR (MLF-8) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)

Technical Specifications & Part Details (SY58601UMG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY58601UMG-TR (MLF-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to 85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to 85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
5GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (MLF-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.60×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MLF-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.65 mm
Pins / Total PadsTopology
17P / 17Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY58601UMG-TR (MLF-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY58601UMG-TR (MLF-8)?

Manufactured by MICROCHIP, the SY58601UMG-TR is housed in a MLF-8 package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (VT0: Multiplexed I/O & Peripheral Pin VT0 (General)), 2 (VREF-AC0: Multiplexed I/O & Peripheral Pin VREF-AC0 (General)), 3 (VREF-AC1: Multiplexed I/O & Peripheral Pin VREF-AC1 (General)), 4 (VT1: Multiplexed I/O & Peripheral Pin VT1 (General)), 5 (IN1: Multiplexed I/O & Peripheral Pin IN1 (General)), 6 (/IN1: Multiplexed I/O & Peripheral Pin /IN1 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY58601UMG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY58601UMG-TR (MLF-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.60 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY58601UMG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY58601UMG-TR (MICROCHIP, MLF-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & SY58601 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VT0Digital_IOSignal terminal VT0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT0. Supported peripheral buses: General.
2VREF-AC0AnalogSignal terminal VREF-AC0 (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC0. Supported peripheral buses: General.
3VREF-AC1AnalogSignal terminal VREF-AC1 (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC1. Supported peripheral buses: General.
4VT1Digital_IOSignal terminal VT1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT1. Supported peripheral buses: General.
5IN1Digital_IOSignal terminal IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN1. Supported peripheral buses: General.
6/IN1Digital_IOSignal terminal /IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /IN1. Supported peripheral buses: General.
7SELDigital_IOSignal terminal SEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SEL. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9/QDigital_IOSignal terminal /Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /Q. Supported peripheral buses: General.
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11ExposedpadDigital_IOSignal terminal Exposedpad (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Exposedpad. Supported peripheral buses: General.
12QDigital_IOSignal terminal Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q. Supported peripheral buses: General.
13VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
14NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
15IN0Digital_IOSignal terminal IN0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN0. Supported peripheral buses: General.
16/IN0Digital_IOSignal terminal /IN0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /IN0. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.