SY55853UKI (MSOP-10) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY55853UKI

MICROCHIPMSOP-10 · 10 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY55853UKI (MSOP-10)1D2D#3LE4LE#5GND10VCC9R#8R7Q6Q#Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
12345678910E=3.00mm · Pitch e=0.50mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (10/10)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1DI/OMultiplexed I/O & Peripheral Pin D (General)
2D#I/OMultiplexed I/O & Peripheral Pin D# (General)
3LEI/OMultiplexed I/O & Peripheral Pin LE (General)
4LE#I/OMultiplexed I/O & Peripheral Pin LE# (General)
5GNDGNDGround Reference Pin (GND)
6Q#I/OMultiplexed I/O & Peripheral Pin Q# (General)
7QI/OMultiplexed I/O & Peripheral Pin Q (General)
8RI/OMultiplexed I/O & Peripheral Pin R (General)
9R#I/OMultiplexed I/O & Peripheral Pin R# (General)
10VCCPowerPower Supply Input (VCC — 2.3V to 5.7V)
PIN 1 D
I/O
Multiplexed I/O & Peripheral Pin D (General)
Design note: Signal terminal D (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: D. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY55853UKI (MSOP-10) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY55853UKI (MSOP-10) - 2. Standard Pinout (Top View)
True package pinout (10 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY55853UKI (MSOP-10) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY55853UKI (MSOP-10) - 4. Package Dimensions (D×E×A)
MSOP-10 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY55853UKI (MSOP-10) - 5. Recommended Land Pattern
IPC-7351B Footprint (10 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY55853UKI (MSOP-10) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for SY55853
P7 · p07_fig01EXACT PACKAGE
SY55853UKI (MSOP-10) — 7 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | 10-PIN MSOP (K10-1) | Rev. 00 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
7 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | 10-PIN MSOP (K10-1) | Rev. 00 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
P1 · p01_fig012038×2806px
SY55853UKI (MSOP-10) — 1 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | FEATURES | D LATCH SuperLite™ SY55853U | APPLICATIONS | I High-speed logic I OC-48 communication systems | FUNCTIONAL BLOCK DIAGRAM | R
1 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | FEATURES | D LATCH SuperLite™ SY55853U | APPLICATIONS | I High-speed logic I OC-48 communication systems | FUNCTIONAL BLOCK DIAGRAM | R
P5 · p05_fig012038×2701px
SY55853UKI (MSOP-10) — 5 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | VCC = 2.3V to 5.7V; GND = 0V; TA = -40°C to +85°C; unless noted. | Symbol Parameter Condition Min Typ Max Units | fMAX Max. Operating Frequency 2.5 G
5 | SuperLite™ SY55853U Micrel, Inc. | M9999-110705 hbwhelp@micrel.com or (408) 955-1690 | VCC = 2.3V to 5.7V; GND = 0V; TA = -40°C to +85°C; unless noted. | Symbol Parameter Condition Min Typ Max Units | fMAX Max. Operating Frequency 2.5 G
P5 · p05_fig01P5
SY55853UKI (MSOP-10) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)
P6 · p06_fig012038×2701px
SY55853UKI (MSOP-10) — Figure 4. 100Ω Load CML Output
Figure 4. 100Ω Load CML Output

Technical Specifications & Part Details (SY55853UKI)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY55853UKI (MSOP-10) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.3V to 5.7V supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.3V to 5.7V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2.5GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-10)
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol10 auto-grouped pins
OK
IPC-7351B Land Pattern10 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-10)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
10P / 10Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-10
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY55853UKI (MSOP-10)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY55853UKI (MSOP-10)?

Manufactured by MICROCHIP, the SY55853UKI is housed in a MSOP-10 package with 10 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.3V to 5.7V. Key pins include: 1 (D: Multiplexed I/O & Peripheral Pin D (General)), 2 (D#: Multiplexed I/O & Peripheral Pin D# (General)), 3 (LE: Multiplexed I/O & Peripheral Pin LE (General)), 4 (LE#: Multiplexed I/O & Peripheral Pin LE# (General)), 5 (GND: Ground Reference Pin (GND)), 6 (Q#: Multiplexed I/O & Peripheral Pin Q# (General)).

What are the IPC-7351B PCB Footprint dimensions for SY55853UKI?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY55853UKI (MSOP-10) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 10 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY55853UKI?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY55853UKI (MICROCHIP, MSOP-10) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (10 pins) & SY55853 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1DDigital_IOSignal terminal D (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: D. Supported peripheral buses: General.
2D#Digital_IOSignal terminal D# (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: D#. Supported peripheral buses: General.
3LEDigital_IOSignal terminal LE (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: LE. Supported peripheral buses: General.
4LE#Digital_IOSignal terminal LE# (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: LE#. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6Q#Digital_IOSignal terminal Q# (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: Q#. Supported peripheral buses: General.
7QDigital_IOSignal terminal Q (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: Q. Supported peripheral buses: General.
8RDigital_IOSignal terminal R (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: R. Supported peripheral buses: General.
9R#Digital_IOSignal terminal R# (I/O, 2.3V to 5.7V domain). Multiplexed alternate functions: R#. Supported peripheral buses: General.
10VCCPower_InPrimary positive power supply input (VCC) operating in the 2.3V to 5.7V domain (Max rating: 5.7V).