SY100EP111UTG-TX (TQFP-32(7x7)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY100EP111UTG-TX

MICROCHIPTQFP-32(7x7) · 32 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY100EP111UTG-TX (TQFP-32(7x7))1VCC2CLK_SEL3CLK04/CLK05VBB6CLK17/CLK18VEE9VCC10/Q911Q912/Q813Q814/Q715Q716VCC32VCC31Q030/Q029Q128/Q127Q226/Q225VCC24Q323/Q322Q421/Q420Q519/Q518Q617/Q6Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132E=7.00mm · Pitch e=0.80mmD=7.00mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 7.00mm × 7.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (32/32)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VCCPowerPower Supply Input (VCC — 2.375V to 3.8V)
2CLK_SELI/OMultiplexed I/O & Peripheral Pin CLK_SEL (General)
3CLK0I/OMultiplexed I/O & Peripheral Pin CLK0 (General)
4/CLK0I/OMultiplexed I/O & Peripheral Pin /CLK0 (General)
5VBBI/OMultiplexed I/O & Peripheral Pin VBB (General)
6CLK1I/OMultiplexed I/O & Peripheral Pin CLK1 (General)
7/CLK1I/OMultiplexed I/O & Peripheral Pin /CLK1 (General)
8VEEI/OMultiplexed I/O & Peripheral Pin VEE (General)
9VCCPowerPower Supply Input (VCC — 2.375V to 3.8V)
10/Q9I/OMultiplexed I/O & Peripheral Pin /Q9 (General)
11Q9I/OMultiplexed I/O & Peripheral Pin Q9 (General)
12/Q8I/OMultiplexed I/O & Peripheral Pin /Q8 (General)
13Q8I/OMultiplexed I/O & Peripheral Pin Q8 (General)
14/Q7I/OMultiplexed I/O & Peripheral Pin /Q7 (General)
15Q7I/OMultiplexed I/O & Peripheral Pin Q7 (General)
16VCCPowerPower Supply Input (VCC — 2.375V to 3.8V)
17/Q6I/OMultiplexed I/O & Peripheral Pin /Q6 (General)
18Q6I/OMultiplexed I/O & Peripheral Pin Q6 (General)
19/Q5I/OMultiplexed I/O & Peripheral Pin /Q5 (General)
20Q5I/OMultiplexed I/O & Peripheral Pin Q5 (General)
21/Q4I/OMultiplexed I/O & Peripheral Pin /Q4 (General)
22Q4I/OMultiplexed I/O & Peripheral Pin Q4 (General)
23/Q3I/OMultiplexed I/O & Peripheral Pin /Q3 (General)
24Q3I/OMultiplexed I/O & Peripheral Pin Q3 (General)
25VCCPowerPower Supply Input (VCC — 2.375V to 3.8V)
26/Q2I/OMultiplexed I/O & Peripheral Pin /Q2 (General)
27Q2I/OMultiplexed I/O & Peripheral Pin Q2 (General)
28/Q1I/OMultiplexed I/O & Peripheral Pin /Q1 (General)
29Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
30/Q0I/OMultiplexed I/O & Peripheral Pin /Q0 (General)
31Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
32VCCPowerPower Supply Input (VCC — 2.375V to 3.8V)
PIN 1 VCC
Power
Power Supply Input (VCC — 2.375V to 3.8V)
Design note: Primary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY100EP111UTG-TX (TQFP-32(7x7)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY100EP111UTG-TX (TQFP-32(7x7)) - 2. Standard Pinout (Top View)
True package pinout (32 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY100EP111UTG-TX (TQFP-32(7x7)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY100EP111UTG-TX (TQFP-32(7x7)) - 4. Package Dimensions (D×E×A)
TQFP-32(7x7) · 7.00×7.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY100EP111UTG-TX (TQFP-32(7x7)) - 5. Recommended Land Pattern
IPC-7351B Footprint (32 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY100EP111UTG-TX (TQFP-32(7x7)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for SY100
P9 · p09_fig01EXACT PACKAGE
SY100EP111UTG-TX (TQFP-32(7x7)) — 9 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | 32-PIN THIN QUAD FLATPACK (T32-1) | Rev. 01 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
9 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | 32-PIN THIN QUAD FLATPACK (T32-1) | Rev. 01 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2005 Micrel, Incorporated.
P1 · p01_fig012038×2803px
SY100EP111UTG-TX (TQFP-32(7x7)) — 1 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | BLOCK DIAGRAM | 0 | 1 | CLK0 | /CLK0 | CLK_SEL | Q0 | /Q0 | Q1 | /Q1 | Q2 | /Q2 | Q3 | /Q3 | Q4 | /Q4 | Q5 | /Q5 | Q6 | /Q6 | Q7 | /Q7 | Q8
1 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | BLOCK DIAGRAM | 0 | 1 | CLK0 | /CLK0 | CLK_SEL | Q0 | /Q0 | Q1 | /Q1 | Q2 | /Q2 | Q3 | /Q3 | Q4 | /Q4 | Q5 | /Q5 | Q6 | /Q6 | Q7 | /Q7 | Q8
P1 · p01_fig01P1
SY100EP111UTG-TX (TQFP-32(7x7)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig012040×2793px
SY100EP111UTG-TX (TQFP-32(7x7)) — 2 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Ordering Information(1) | Package Operating Package Lead Part Number Type Range Marking Finish | SY100EP111U
2 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | Ordering Information(1) | Package Operating Package Lead Part Number Type Range Marking Finish | SY100EP111U
P7 · p07_fig012038×2793px
SY100EP111UTG-TX (TQFP-32(7x7)) — 7 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | TYPICAL CHARACTERISTICS | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 0 | 500 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | OUTPUT
7 | Precision Edge® | SY100EP111U Micrel, Inc. | M9999-021511 hbwhelp@micrel.com or (408) 955-1690 | TYPICAL CHARACTERISTICS | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 0 | 500 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | OUTPUT
P8 · p08_fig012038×2793px
SY100EP111UTG-TX (TQFP-32(7x7)) — Figure 3. Terminating Unused I/O
Figure 3. Terminating Unused I/O

Technical Specifications & Part Details (SY100EP111UTG-TX)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY100EP111UTG-TX (TQFP-32(7x7)) is a 32-pin standard electronic & interconnect component featuring a 7.00 × 7.00 × 1.20 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 2.375V to 3.8V supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.375V to 3.8V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
3GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
7.00 × 7.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-32(7x7))
Pin Count & Lead PitchN / e
32 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol32 auto-grouped pins
OK
IPC-7351B Land Pattern32 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TQFP-32(7x7))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
7.00 × 7.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.80mm
Pad Size (W × L)Level B
0.50 × 1.50 mm
Pins / Total PadsTopology
32P / 32Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-32(7x7)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY100EP111UTG-TX (TQFP-32(7x7))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY100EP111UTG-TX (TQFP-32(7x7))?

Manufactured by MICROCHIP, the SY100EP111UTG-TX is housed in a TQFP-32(7x7) package with 32 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 2.375V to 3.8V. Key pins include: 1 (VCC: Power Supply Input (VCC — 2.375V to 3.8V)), 2 (CLK_SEL: Multiplexed I/O & Peripheral Pin CLK_SEL (General)), 3 (CLK0: Multiplexed I/O & Peripheral Pin CLK0 (General)), 4 (/CLK0: Multiplexed I/O & Peripheral Pin /CLK0 (General)), 5 (VBB: Multiplexed I/O & Peripheral Pin VBB (General)), 6 (CLK1: Multiplexed I/O & Peripheral Pin CLK1 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY100EP111UTG-TX?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY100EP111UTG-TX (TQFP-32(7x7)) has a nominal body envelope of 7.00 × 7.00 mm, pitch e = 0.80 mm, and 32 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY100EP111UTG-TX?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY100EP111UTG-TX (MICROCHIP, TQFP-32(7x7)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (32 pins) & SY100 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VCCPower_InPrimary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).
2CLK_SELDigital_IOSignal terminal CLK_SEL (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: CLK_SEL. Supported peripheral buses: General.
3CLK0Digital_IOSignal terminal CLK0 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: CLK0. Supported peripheral buses: General.
4/CLK0Digital_IOSignal terminal /CLK0 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /CLK0. Supported peripheral buses: General.
5VBBDigital_IOSignal terminal VBB (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: VBB. Supported peripheral buses: General.
6CLK1Digital_IOSignal terminal CLK1 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: CLK1. Supported peripheral buses: General.
7/CLK1Digital_IOSignal terminal /CLK1 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /CLK1. Supported peripheral buses: General.
8VEEDigital_IOSignal terminal VEE (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: VEE. Supported peripheral buses: General.
9VCCPower_InPrimary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).
10/Q9Digital_IOSignal terminal /Q9 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q9. Supported peripheral buses: General.
11Q9Digital_IOSignal terminal Q9 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q9. Supported peripheral buses: General.
12/Q8Digital_IOSignal terminal /Q8 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q8. Supported peripheral buses: General.
13Q8Digital_IOSignal terminal Q8 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q8. Supported peripheral buses: General.
14/Q7Digital_IOSignal terminal /Q7 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q7. Supported peripheral buses: General.
15Q7Digital_IOSignal terminal Q7 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q7. Supported peripheral buses: General.
16VCCPower_InPrimary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).
17/Q6Digital_IOSignal terminal /Q6 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q6. Supported peripheral buses: General.
18Q6Digital_IOSignal terminal Q6 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q6. Supported peripheral buses: General.
19/Q5Digital_IOSignal terminal /Q5 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q5. Supported peripheral buses: General.
20Q5Digital_IOSignal terminal Q5 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q5. Supported peripheral buses: General.
21/Q4Digital_IOSignal terminal /Q4 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q4. Supported peripheral buses: General.
22Q4Digital_IOSignal terminal Q4 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q4. Supported peripheral buses: General.
23/Q3Digital_IOSignal terminal /Q3 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q3. Supported peripheral buses: General.
24Q3Digital_IOSignal terminal Q3 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q3. Supported peripheral buses: General.
25VCCPower_InPrimary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).
26/Q2Digital_IOSignal terminal /Q2 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q2. Supported peripheral buses: General.
27Q2Digital_IOSignal terminal Q2 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q2. Supported peripheral buses: General.
28/Q1Digital_IOSignal terminal /Q1 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q1. Supported peripheral buses: General.
29Q1Digital_IOSignal terminal Q1 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
30/Q0Digital_IOSignal terminal /Q0 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: /Q0. Supported peripheral buses: General.
31Q0Digital_IOSignal terminal Q0 (I/O, 2.375V to 3.8V domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
32VCCPower_InPrimary positive power supply input (VCC) operating in the 2.375V to 3.8V domain (Max rating: 3.8V).