PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC24EP32GP202T-I/MM

MICROCHIPQFN-28-EP(6x6) · 29 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC24EP32GP202T-I/MM (QFN-28-EP(6x6))1IO12IO233V34NC5VSS6OSC1/CLKI/RA7OSC2/CLKO/RA8RP36/RB49CVREF2O/RP2010VDD11PGED2/ASDA2/12PGEC2/ASCL2/13SCK1/RP39/IN14IO1615IO1729EP28AN1/C2IN1+/R27AN0/OA2OUT/R26MCLR#25AVDD24AVSS23RPI47/T5CK/R22RPI46/T3CK/R21RPI45/CTPLS/20RPI44/RB1219TDI/RP43/RB118TDO/RP42/RB117VCAP16VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=6.00mm · Pitch e=0.50mmD=6.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.00mm × 6.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2IO2I/OGeneral Purpose Digital I/O Pin IO2
33V3Power3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNCNo Connect (Leave Floating)
5VSSGNDGround Reference Pin (VSS)
6OSC1/CLKI/RA2I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA2 (RTC/CLK)
7OSC2/CLKO/RA3I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA3 (RTC/CLK)
8RP36/RB4I/OMultiplexed I/O & Peripheral Pin RP36/RB4 (General)
9CVREF2O/RP20/T1CK/RA4AnalogMultiplexed I/O & Peripheral Pin CVREF2O/RP20/T1CK/RA4 (General)
10VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
11PGED2/ASDA2/RP37/RB5I/OMultiplexed I/O & Peripheral Pin PGED2/ASDA2/RP37/RB5 (General)
12PGEC2/ASCL2/RP38/RB6I/OMultiplexed I/O & Peripheral Pin PGEC2/ASCL2/RP38/RB6 (General)
13SCK1/RP39/INT0/RB7I/OMultiplexed I/O & Peripheral Pin SCK1/RP39/INT0/RB7 (SPI)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16VSSGNDGround Reference Pin (VSS)
17VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
18TDO/RP42/RB10I/OMultiplexed I/O & Peripheral Pin TDO/RP42/RB10 (General)
19TDI/RP43/RB11I/OMultiplexed I/O & Peripheral Pin TDI/RP43/RB11 (General)
20RPI44/RB12I/OMultiplexed I/O & Peripheral Pin RPI44/RB12 (General)
21RPI45/CTPLS/RB13I/OMultiplexed I/O & Peripheral Pin RPI45/CTPLS/RB13 (General)
22RPI46/T3CK/RB14I/OMultiplexed I/O & Peripheral Pin RPI46/T3CK/RB14 (General)
23RPI47/T5CK/RB15I/OMultiplexed I/O & Peripheral Pin RPI47/T5CK/RB15 (General)
24AVSSGNDGround Reference Pin (AVSS)
25AVDDPowerPower Supply Input (AVDD — 3.0V to 3.6V)
26MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
27AN0/OA2OUT/RA0I/OMultiplexed I/O & Peripheral Pin AN0/OA2OUT/RA0 (General)
28AN1/C2IN1+/RA1I/OMultiplexed I/O & Peripheral Pin AN1/C2IN1+/RA1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 19 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(6x6) · 6.00×6.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (19 figures · Page 1/2)
Showing 1–12 of 19 uncropped original figures for PIC24EP32GP2 / DSPIC33EP32G / PIC24EP32MC2
P1 · p01_fig01376×201px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, Op Amps and Advanced Analog
16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, Op Amps and Advanced Analog
P27 · p27_fig011777×1658px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — FIGURE 1-1: dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X BLOCK DIAGRAM
FIGURE 1-1: dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X BLOCK DIAGRAM
P34 · p34_fig011298×980px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — FIGURE 2-4: BOOST CONVERTER IMPLEMENTATION
FIGURE 2-4: BOOST CONVERTER IMPLEMENTATION
P36 · p36_fig011471×1006px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — FIGURE 2-7: INTERLEAVED PFC
FIGURE 2-7: INTERLEAVED PFC
P36 · p36_fig021162×699px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — FIGURE 2-8: BEMF VOLTAGE MEASURED USING THE ADC MODULE
FIGURE 2-8: BEMF VOLTAGE MEASURED USING THE ADC MODULE
P36 · p36_fig02P36
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — Datasheet Page 36 (p36_fig02)
Datasheet Page 36 (p36_fig02)
P121 · p121_fig011777×980px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
P509 · p509_fig011778×2547px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
P509 · p509_fig01P509
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — Datasheet Page 509 (p509_fig01)
Datasheet Page 509 (p509_fig01)
P511 · p511_fig011778×2547px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
P511 · p511_fig01P511
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — Datasheet Page 511 (p511_fig01)
Datasheet Page 511 (p511_fig01)
P512 · p512_fig01938×1137px
PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) — MILLIMETERS
MILLIMETERS
Page 1 / 2 (19 extracted figures)

Technical Specifications & Part Details (PIC24EP32GP202T-I/MM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) is a 28-pin standard electronic & interconnect component featuring a 6.00 × 6.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.0V to 3.6V supply operation across -40°C to +85°C with integrated UART, SPI, I2C, ADC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
140 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 6.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-28-EP(6x6))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.70×3.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC24EP32GP2 / DSPIC33EP32G / PIC24EP32MC2 (20)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-28-EP(6x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 6.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(6x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC24EP32GP202T-I/MM (QFN-28-EP(6x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC24EP32GP202T-I/MM (QFN-28-EP(6x6))?

Manufactured by MICROCHIP, the PIC24EP32GP202T-I/MM is housed in a QFN-28-EP(6x6) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (3V3: 3.3V Main Power Supply Rail (3.0V ~ 3.6V)), 4 (NC: No Connect (Leave Floating)), 5 (VSS: Ground Reference Pin (VSS)), 6 (OSC1/CLKI/RA2: Multiplexed I/O & Peripheral Pin OSC1/CLKI/RA2 (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for PIC24EP32GP202T-I/MM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC24EP32GP202T-I/MM (QFN-28-EP(6x6)) has a nominal body envelope of 6.00 × 6.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 3.70 × 3.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC24EP32GP202T-I/MM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC24EP32GP202T-I/MM (MICROCHIP, QFN-28-EP(6x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & PIC24EP32GP2 / DSPIC33EP32G / PIC24EP32MC2 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
33V3Power_In3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNo_ConnectNo Connect (Leave Floating)
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6OSC1/CLKI/RA2Digital_IOSignal terminal OSC1/CLKI/RA2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKI/RA2. Supported peripheral buses: RTC/CLK.
7OSC2/CLKO/RA3Digital_IOSignal terminal OSC2/CLKO/RA3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKO/RA3. Supported peripheral buses: RTC/CLK.
8RP36/RB4Digital_IOSignal terminal RP36/RB4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP36/RB4. Supported peripheral buses: General.
9CVREF2O/RP20/T1CK/RA4AnalogSignal terminal CVREF2O/RP20/T1CK/RA4 (Analog, 3.0V to 3.6V domain). Multiplexed alternate functions: CVREF2O/RP20/T1CK/RA4. Supported peripheral buses: General.
10VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
11PGED2/ASDA2/RP37/RB5Digital_IOSignal terminal PGED2/ASDA2/RP37/RB5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGED2/ASDA2/RP37/RB5. Supported peripheral buses: General.
12PGEC2/ASCL2/RP38/RB6Digital_IOSignal terminal PGEC2/ASCL2/RP38/RB6 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGEC2/ASCL2/RP38/RB6. Supported peripheral buses: General.
13SCK1/RP39/INT0/RB7Digital_IOSignal terminal SCK1/RP39/INT0/RB7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SCK1/RP39/INT0/RB7. Supported peripheral buses: SPI.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17VCAPDigital_IOSignal terminal VCAP (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
18TDO/RP42/RB10Digital_IOSignal terminal TDO/RP42/RB10 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDO/RP42/RB10. Supported peripheral buses: General.
19TDI/RP43/RB11Digital_IOSignal terminal TDI/RP43/RB11 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDI/RP43/RB11. Supported peripheral buses: General.
20RPI44/RB12Digital_IOSignal terminal RPI44/RB12 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RPI44/RB12. Supported peripheral buses: General.
21RPI45/CTPLS/RB13Digital_IOSignal terminal RPI45/CTPLS/RB13 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RPI45/CTPLS/RB13. Supported peripheral buses: General.
22RPI46/T3CK/RB14Digital_IOSignal terminal RPI46/T3CK/RB14 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RPI46/T3CK/RB14. Supported peripheral buses: General.
23RPI47/T5CK/RB15Digital_IOSignal terminal RPI47/T5CK/RB15 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RPI47/T5CK/RB15. Supported peripheral buses: General.
24AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
25AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
26MCLR#Digital_IOSignal terminal MCLR# (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
27AN0/OA2OUT/RA0Digital_IOSignal terminal AN0/OA2OUT/RA0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN0/OA2OUT/RA0. Supported peripheral buses: General.
28AN1/C2IN1+/RA1Digital_IOSignal terminal AN1/C2IN1+/RA1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN1/C2IN1+/RA1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.