PIC16F876-04/SP (SPDIP-28) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC16F876-04/SP

MICROCHIPSPDIP-28 · 28 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC16F876-04/SP (SPDIP-28)1MCLR/VPP2RA0/AN03RA1/AN14RA2/AN2/VREF5RA3/AN3/VREF6RA4/T0CKI7RA5/AN4/SS#8VSS9OSC1/CLKIN10OSC2/CLKOUT11VDD12VSS13OSC1/CLKIN14OSC2/CLKOUT28RB7/PGD27RB6/PGC26RB525RB424RB3/PGM23RB222RB121RB0/INT20VDD19VSS18RC7/RX/DT17RC6/TX/CK16RC5/SDO15RC4/SDI/SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
15141613272262524232217181920121110934567821281E=34.70mm · Pitch e=0.50mmD=7.20mm-27-25-23-21-19-17-15-13-11-9-7-5-3-11357911131517192123252714121086420-2-4-6-8-10-12-14mm
3. 3D CAD MODEL
Package Body: 34.70mm × 7.20mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1MCLR/VPPI/OMultiplexed I/O & Peripheral Pin MCLR/VPP (General)
2RA0/AN0I/OMultiplexed I/O & Peripheral Pin RA0/AN0 (General)
3RA1/AN1I/OMultiplexed I/O & Peripheral Pin RA1/AN1 (General)
4RA2/AN2/VREF-AnalogMultiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)
5RA3/AN3/VREF+AnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)
6RA4/T0CKII/OMultiplexed I/O & Peripheral Pin RA4/T0CKI (General)
7RA5/AN4/SS#I/OMultiplexed I/O & Peripheral Pin RA5/AN4/SS# (General)
8VSSGNDGround Reference Pin (VSS)
9OSC1/CLKINI/OMultiplexed I/O & Peripheral Pin OSC1/CLKIN (RTC/CLK)
10OSC2/CLKOUTI/OMultiplexed I/O & Peripheral Pin OSC2/CLKOUT (RTC/CLK)
11VDDPowerPower Supply Input (VDD — 2.0V to 5.5V)
12VSSGNDGround Reference Pin (VSS)
13OSC1/CLKINI/OMultiplexed I/O & Peripheral Pin OSC1/CLKIN (RTC/CLK)
14OSC2/CLKOUTI/OMultiplexed I/O & Peripheral Pin OSC2/CLKOUT (RTC/CLK)
15RC4/SDI/SDAI/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
16RC5/SDOI/OMultiplexed I/O & Peripheral Pin RC5/SDO (General)
17RC6/TX/CKI/OMultiplexed I/O & Peripheral Pin RC6/TX/CK (General)
18RC7/RX/DTI/OMultiplexed I/O & Peripheral Pin RC7/RX/DT (General)
19VSSGNDGround Reference Pin (VSS)
20VDDPowerPower Supply Input (VDD — 2.0V to 5.5V)
21RB0/INTI/OMultiplexed I/O & Peripheral Pin RB0/INT (General)
22RB1I/OMultiplexed I/O & Peripheral Pin RB1 (General)
23RB2I/OMultiplexed I/O & Peripheral Pin RB2 (General)
24RB3/PGMI/OMultiplexed I/O & Peripheral Pin RB3/PGM (General)
25RB4I/OMultiplexed I/O & Peripheral Pin RB4 (General)
26RB5I/OMultiplexed I/O & Peripheral Pin RB5 (General)
27RB6/PGCI/OMultiplexed I/O & Peripheral Pin RB6/PGC (General)
28RB7/PGDI/OMultiplexed I/O & Peripheral Pin RB7/PGD (General)
PIN 1 MCLR/VPP
I/O
Multiplexed I/O & Peripheral Pin MCLR/VPP (General)
Design note: Master Clear (Reset) input or programming voltage input. This pin is an active low RESET to the device.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC16F876-04/SP (SPDIP-28) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC16F876-04/SP (SPDIP-28) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC16F876-04/SP (SPDIP-28) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC16F876-04/SP (SPDIP-28) - 4. Package Dimensions (D×E×A)
SPDIP-28 · 34.70×7.20mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC16F876-04/SP (SPDIP-28) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC16F876-04/SP (SPDIP-28) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for PIC16F876
P5 · p05_fig01EXACT PACKAGE
PIC16F876-04/SP (SPDIP-28) — FIGURE 1-1: PIC16F873 AND PIC16F876 BLOCK DIAGRAM
FIGURE 1-1: PIC16F873 AND PIC16F876 BLOCK DIAGRAM
P1 · p01_fig01867×1053px
PIC16F876-04/SP (SPDIP-28) — 28/40-Pin 8-Bit CMOS FLASH Microcontrollers
28/40-Pin 8-Bit CMOS FLASH Microcontrollers
P1 · p01_fig01P1
PIC16F876-04/SP (SPDIP-28) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig01834×893px
PIC16F876-04/SP (SPDIP-28) — PLCC
PLCC
P2 · p02_fig02856×678px
PIC16F876-04/SP (SPDIP-28) — 36
36
P2 · p02_fig03704×803px
PIC16F876-04/SP (SPDIP-28) — DS30292D-page 2  1998-2013 Microchip Technology Inc.
DS30292D-page 2  1998-2013 Microchip Technology Inc.
P2 · p02_fig02P2
PIC16F876-04/SP (SPDIP-28) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P59 · p59_fig011753×571px
PIC16F876-04/SP (SPDIP-28) — FIGURE 8-1: CAPTURE MODE OPERATION BLOCK DIAGRAM RC2/CCP1
FIGURE 8-1: CAPTURE MODE OPERATION BLOCK DIAGRAM RC2/CCP1
P60 · p60_fig01867×699px
PIC16F876-04/SP (SPDIP-28) — FIGURE 8-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 8-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P134 · p134_fig01869×1162px
PIC16F876-04/SP (SPDIP-28) — Note 1: The High Voltage Programming mode is always available, regardless of the state of the LVP bit, by applying VIHH to the MCLR pin. | 2: While in Low Voltage ICSP mode, the RB3 pin can no longer be used as a gen- eral purpose I/O pin.
Note 1: The High Voltage Programming mode is always available, regardless of the state of the LVP bit, by applying VIHH to the MCLR pin. | 2: While in Low Voltage ICSP mode, the RB3 pin can no longer be used as a gen- eral purpose I/O pin.
P135 · p135_fig011778×1499px
PIC16F876-04/SP (SPDIP-28) — FIGURE 13-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
FIGURE 13-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
P191 · p191_fig011587×2181px
PIC16F876-04/SP (SPDIP-28) —  1998-2013 Microchip Technology Inc. DS30292D-page 191
 1998-2013 Microchip Technology Inc. DS30292D-page 191
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (PIC16F876-04/SP)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC16F876-04/SP (SPDIP-28) is a 28-pin standard electronic & interconnect component featuring a 34.70 × 7.20 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 2.0V to 5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
34.70 × 7.20 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (SPDIP-28)
Pin Count & Lead PitchN / e
28 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC16F876 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SPDIP-28)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
34.70 × 7.20 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
28P / 28Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SPDIP-28
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC16F876-04/SP (SPDIP-28)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC16F876-04/SP (SPDIP-28)?

Manufactured by MICROCHIP, the PIC16F876-04/SP is housed in a SPDIP-28 package with 28 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V to 5.5V. Key pins include: 1 (MCLR/VPP: Multiplexed I/O & Peripheral Pin MCLR/VPP (General)), 2 (RA0/AN0: Multiplexed I/O & Peripheral Pin RA0/AN0 (General)), 3 (RA1/AN1: Multiplexed I/O & Peripheral Pin RA1/AN1 (General)), 4 (RA2/AN2/VREF-: Multiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)), 5 (RA3/AN3/VREF+: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)), 6 (RA4/T0CKI: Multiplexed I/O & Peripheral Pin RA4/T0CKI (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC16F876-04/SP?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC16F876-04/SP (SPDIP-28) has a nominal body envelope of 7.20 × 34.70 mm, pitch e = 0.50 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC16F876-04/SP?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC16F876-04/SP (MICROCHIP, SPDIP-28) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & PIC16F876 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1MCLR/VPPDigital_IOSignal terminal MCLR/VPP (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: MCLR/VPP. Supported peripheral buses: General.
2RA0/AN0Digital_IOSignal terminal RA0/AN0 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA0/AN0. Supported peripheral buses: General.
3RA1/AN1Digital_IOSignal terminal RA1/AN1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA1/AN1. Supported peripheral buses: General.
4RA2/AN2/VREF-AnalogSignal terminal RA2/AN2/VREF- (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA2/AN2/VREF-. Supported peripheral buses: General.
5RA3/AN3/VREF+AnalogSignal terminal RA3/AN3/VREF+ (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA3/AN3/VREF+. Supported peripheral buses: General.
6RA4/T0CKIDigital_IOSignal terminal RA4/T0CKI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA4/T0CKI. Supported peripheral buses: General.
7RA5/AN4/SS#Digital_IOSignal terminal RA5/AN4/SS# (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA5/AN4/SS#. Supported peripheral buses: General.
8VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
9OSC1/CLKINDigital_IOSignal terminal OSC1/CLKIN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKIN. Supported peripheral buses: RTC/CLK.
10OSC2/CLKOUTDigital_IOSignal terminal OSC2/CLKOUT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKOUT. Supported peripheral buses: RTC/CLK.
11VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
12VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
13OSC1/CLKINDigital_IOSignal terminal OSC1/CLKIN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKIN. Supported peripheral buses: RTC/CLK.
14OSC2/CLKOUTDigital_IOSignal terminal OSC2/CLKOUT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKOUT. Supported peripheral buses: RTC/CLK.
15RC4/SDI/SDADigital_IOSignal terminal RC4/SDI/SDA (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
16RC5/SDODigital_IOSignal terminal RC5/SDO (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
17RC6/TX/CKDigital_IOSignal terminal RC6/TX/CK (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
18RC7/RX/DTDigital_IOSignal terminal RC7/RX/DT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
19VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
20VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
21RB0/INTDigital_IOSignal terminal RB0/INT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB0/INT. Supported peripheral buses: General.
22RB1Digital_IOSignal terminal RB1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB1. Supported peripheral buses: General.
23RB2Digital_IOSignal terminal RB2 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB2. Supported peripheral buses: General.
24RB3/PGMDigital_IOSignal terminal RB3/PGM (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB3/PGM. Supported peripheral buses: General.
25RB4Digital_IOSignal terminal RB4 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB4. Supported peripheral buses: General.
26RB5Digital_IOSignal terminal RB5 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB5. Supported peripheral buses: General.
27RB6/PGCDigital_IOSignal terminal RB6/PGC (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB6/PGC. Supported peripheral buses: General.
28RB7/PGDDigital_IOSignal terminal RB7/PGD (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB7/PGD. Supported peripheral buses: General.