PIC12F1822T-I/MF (DFN-8-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC12F1822T-I/MF

MICROCHIPDFN-8-EP(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC12F1822T-I/MF (DFN-8-EP(3x3))1—2—3SDO4SS5SDA SDI9EP8—7SDO(1) SS6SCL SCKGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=3.00mm · Pitch e=0.65mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1—I/OMultiplexed I/O & Peripheral Pin — (General)
2—I/OMultiplexed I/O & Peripheral Pin — (General)
3SDOI/OMultiplexed I/O & Peripheral Pin SDO (General)
4SSI/OMultiplexed I/O & Peripheral Pin SS (General)
5SDA SDII/OMultiplexed I/O & Peripheral Pin SDA SDI (I2C)
6SCL SCKI/OMultiplexed I/O & Peripheral Pin SCL SCK (SPI, I2C)
7SDO(1) SSI/OMultiplexed I/O & Peripheral Pin SDO(1) SS (General)
8—I/OMultiplexed I/O & Peripheral Pin — (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 —
I/O
Multiplexed I/O & Peripheral Pin — (General)
Design note: Signal terminal — (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: —. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC12F1822T-I/MF (DFN-8-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for PIC12F1822T / PIC16F1829T
P3 · p03_fig01580×321px
PIC12F1822T-I/MF (DFN-8-EP(3x3)) — FIGURE 1: 8-PIN DIAGRAM FOR PIC12F1822/LF1822
FIGURE 1: 8-PIN DIAGRAM FOR PIC12F1822/LF1822
P3 · p03_fig01P3
PIC12F1822T-I/MF (DFN-8-EP(3x3)) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P9 · p09_fig011779×2637px
PIC12F1822T-I/MF (DFN-8-EP(3x3)) —  2009 Microchip Technology Inc. Advance Information DS41406B-page 9 | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Micr
 2009 Microchip Technology Inc. Advance Information DS41406B-page 9 | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Micr
P9 · p09_fig02782×281px
PIC12F1822T-I/MF (DFN-8-EP(3x3)) —  2009 Microchip Technology Inc. Advance Information DS41406B-page 9
 2009 Microchip Technology Inc. Advance Information DS41406B-page 9
P7 · p07_fig01All Packages in PDF
PIC12F1822T-I/MF (DFN-8-EP(3x3)) — TABLE 4: 20-PIN ALLOCATION TABLE (PIC16F/LF1828/1829) | I/O | 20-Pin PDIP/SOIC/SSOP | 20-Pin QFN | A/D | Reference | Cap Sense | Comparator | SR Latch | Timers | CCP | EUSART | MSSP | Interrupt | Modulator | Pull-up | Basic | RA0 19 16 AN0
TABLE 4: 20-PIN ALLOCATION TABLE (PIC16F/LF1828/1829) | I/O | 20-Pin PDIP/SOIC/SSOP | 20-Pin QFN | A/D | Reference | Cap Sense | Comparator | SR Latch | Timers | CCP | EUSART | MSSP | Interrupt | Modulator | Pull-up | Basic | RA0 19 16 AN0

Technical Specifications & Part Details (PIC12F1822T-I/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC12F1822T-I/MF (DFN-8-EP(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, ADC, DAC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 2.25×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC12F1822T / PIC16F1829T (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (DFN-8-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.63 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC12F1822T-I/MF (DFN-8-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC12F1822T-I/MF (DFN-8-EP(3x3))?

Manufactured by MICROCHIP, the PIC12F1822T-I/MF is housed in a DFN-8-EP(3x3) package with 9 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (—: Multiplexed I/O & Peripheral Pin — (General)), 2 (—: Multiplexed I/O & Peripheral Pin — (General)), 3 (SDO: Multiplexed I/O & Peripheral Pin SDO (General)), 4 (SS: Multiplexed I/O & Peripheral Pin SS (General)), 5 (SDA SDI: Multiplexed I/O & Peripheral Pin SDA SDI (I2C)), 6 (SCL SCK: Multiplexed I/O & Peripheral Pin SCL SCK (SPI, I2C)).

What are the IPC-7351B PCB Footprint dimensions for PIC12F1822T-I/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC12F1822T-I/MF (DFN-8-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.25 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC12F1822T-I/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC12F1822T-I/MF (MICROCHIP, DFN-8-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & PIC12F1822T / PIC16F1829T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1—Digital_IOSignal terminal — (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: —. Supported peripheral buses: General.
2—Digital_IOSignal terminal — (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: —. Supported peripheral buses: General.
3SDODigital_IOSignal terminal SDO (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SDO. Supported peripheral buses: General.
4SSDigital_IOSignal terminal SS (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SS. Supported peripheral buses: General.
5SDA SDIDigital_IOSignal terminal SDA SDI (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SDA SDI. Supported peripheral buses: I2C.
6SCL SCKDigital_IOSignal terminal SCL SCK (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SCL SCK. Supported peripheral buses: SPI, I2C.
7SDO(1) SSDigital_IOSignal terminal SDO(1) SS (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SDO(1) SS. Supported peripheral buses: General.
8—Digital_IOSignal terminal — (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: —. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.