MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MTD6502B-LC1-02

MICROCHIPUDFN-10-EP(3x3) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MTD6502B-LC1-02 (UDFN-10-EP(3x3))1FG2GND3VDD4OUT15OUT26GND11EP10PWM9DIR8V CC7OUT3Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1234567891011E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1FGI/OMultiplexed I/O & Peripheral Pin FG (General)
2GNDGNDGround Reference Pin (GND)
3VDDPowerRegulated Power Output (VDD — 2V to 5.5V)
4OUT1I/OMultiplexed I/O & Peripheral Pin OUT1 (General)
5OUT2I/OMultiplexed I/O & Peripheral Pin OUT2 (General)
6GNDGNDGround Reference Pin (GND)
7OUT3I/OMultiplexed I/O & Peripheral Pin OUT3 (General)
8V CCI/OMultiplexed I/O & Peripheral Pin V CC (General)
9DIRI/OMultiplexed I/O & Peripheral Pin DIR (General)
10PWMI/OMultiplexed I/O & Peripheral Pin PWM (PWM)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 FG
I/O
Multiplexed I/O & Peripheral Pin FG (General)
Design note: Motor speed indication output
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
UDFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MTD6502
P1 · p01_fig01377×200px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Features:
Features:
P1 · p01_fig02869×612px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — The MTD6502B is available in a compact thermally- enhanced 3 mm x 3 mm TDFN package.
The MTD6502B is available in a compact thermally- enhanced 3 mm x 3 mm TDFN package.
P1 · p01_fig02P1
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011777×1270px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — MTD6502B
MTD6502B
P3 · p03_fig011629×1108px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Typical Application
Typical Application
P3 · p03_fig01P3
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P11 · p11_fig011567×1072px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — MTD6502B
MTD6502B
P11 · p11_fig021777×765px
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — © 2011 Microchip Technology Inc. DS25003B-page 11 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2011 Microchip Technology Inc. DS25003B-page 11 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P11 · p11_fig01P11
MTD6502B-LC1-02 (UDFN-10-EP(3x3)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)

Technical Specifications & Part Details (MTD6502B-LC1-02)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MTD6502B-LC1-02 (UDFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2V to 5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
1000 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (UDFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×1.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UDFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UDFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MTD6502B-LC1-02 (UDFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MTD6502B-LC1-02 (UDFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MTD6502B-LC1-02 is housed in a UDFN-10-EP(3x3) package with 11 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2V to 5.5V. Key pins include: 1 (FG: Multiplexed I/O & Peripheral Pin FG (General)), 2 (GND: Ground Reference Pin (GND)), 3 (VDD: Regulated Power Output (VDD — 2V to 5.5V)), 4 (OUT1: Multiplexed I/O & Peripheral Pin OUT1 (General)), 5 (OUT2: Multiplexed I/O & Peripheral Pin OUT2 (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MTD6502B-LC1-02?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MTD6502B-LC1-02 (UDFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 1.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MTD6502B-LC1-02?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MTD6502B-LC1-02 (MICROCHIP, UDFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MTD6502 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1FGDigital_IOSignal terminal FG (I/O, 2V to 5.5V domain). Multiplexed alternate functions: FG. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3VDDPower_OutRegulated power output rail (VDD) operating in the 2V to 5.5V domain (Max rating: 5.5V).
4OUT1Digital_IOSignal terminal OUT1 (I/O, 2V to 5.5V domain). Multiplexed alternate functions: OUT1. Supported peripheral buses: General.
5OUT2Digital_IOSignal terminal OUT2 (I/O, 2V to 5.5V domain). Multiplexed alternate functions: OUT2. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7OUT3Digital_IOSignal terminal OUT3 (I/O, 2V to 5.5V domain). Multiplexed alternate functions: OUT3. Supported peripheral buses: General.
8V CCDigital_IOSignal terminal V CC (I/O, 2V to 5.5V domain). Multiplexed alternate functions: V CC. Supported peripheral buses: General.
9DIRDigital_IOSignal terminal DIR (I/O, 2V to 5.5V domain). Multiplexed alternate functions: DIR. Supported peripheral buses: General.
10PWMDigital_IOSignal terminal PWM (I/O, 2V to 5.5V domain). Multiplexed alternate functions: PWM. Supported peripheral buses: PWM.
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.