MIC2203YML-TR (TDFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2203YML-TR

MICROCHIPTDFN-10-EP(3x3) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2203YML-TR (TDFN-10-EP(3x3))1SW2VIN3SYNC_IN4SYNC_OUT5EN6FB11GND10GND9GND8GND7BIASGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1110987654321E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SWI/OMultiplexed I/O & Peripheral Pin SW (General)
2VINPowerPower Supply Input (VIN — 2.3V to 5.5V)
3SYNC_INI/OMultiplexed I/O & Peripheral Pin SYNC_IN (General)
4SYNC_OUTI/OMultiplexed I/O & Peripheral Pin SYNC_OUT (CAN)
5ENISystem Enable & Hardware Reset (EN)
6FBI/OMultiplexed I/O & Peripheral Pin FB (General)
7BIASI/OMultiplexed I/O & Peripheral Pin BIAS (CAN)
8GNDGNDGround Reference Pin (GND)
9GNDGNDGround Reference Pin (GND)
10GNDGNDGround Reference Pin (GND)
11GNDGNDGround Reference Pin (GND)
PIN 1 SW
I/O
Multiplexed I/O & Peripheral Pin SW (General)
Design note: Switch (Output): Internal power MOSFET output switches.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2203YML-TR (TDFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2203YML-TR (TDFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2203YML-TR (TDFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2203YML-TR (TDFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
TDFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2203YML-TR (TDFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2203YML-TR (TDFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MIC2203
P1 · p01_fig011918×523px
MIC2203YML-TR (TDFN-10-EP(3x3)) — MIC2203 | High Efficiency 1MHz Synchronous | Buck Regulator | General Description | Features
MIC2203 | High Efficiency 1MHz Synchronous | Buck Regulator | General Description | Features
P1 · p01_fig021273×561px
MIC2203YML-TR (TDFN-10-EP(3x3)) — MicroLead Frame and MLF are trademarks of Amkor Technologies.
MicroLead Frame and MLF are trademarks of Amkor Technologies.
P1 · p01_fig03521×521px
MIC2203YML-TR (TDFN-10-EP(3x3)) — Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax +1 (408) 474-1000 • http://www.micrel.com December 2004
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax +1 (408) 474-1000 • http://www.micrel.com December 2004
P1 · p01_fig02P1
MIC2203YML-TR (TDFN-10-EP(3x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig01667×391px
MIC2203YML-TR (TDFN-10-EP(3x3)) — Pin Configuration
Pin Configuration
P2 · p02_fig02667×334px
MIC2203YML-TR (TDFN-10-EP(3x3)) — MLF-10 (ML) Top View Pin Description
MLF-10 (ML) Top View Pin Description
P2 · p02_fig01P2
MIC2203YML-TR (TDFN-10-EP(3x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P7 · p07_fig01455×456px
MIC2203YML-TR (TDFN-10-EP(3x3)) — Figure 2. Efficiency Curve The shaded region, 100mA to 300mA, efficiency loss is dominated by MOSFET RDS(ON) and inductor DC losses. Higher input supply voltages will increase
Figure 2. Efficiency Curve The shaded region, 100mA to 300mA, efficiency loss is dominated by MOSFET RDS(ON) and inductor DC losses. Higher input supply voltages will increase
P13 · p13_fig011046×597px
MIC2203YML-TR (TDFN-10-EP(3x3)) — Package Information
Package Information

Technical Specifications & Part Details (MIC2203YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2203YML-TR (TDFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.3V to 5.5V supply operation across -40°C to +125°C with integrated Wi-Fi, PWM, CAN interfaces.
Operating Supply VoltageV_CC / V_DD
2.3V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Wi-Fi, PWM, CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×2.30mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TDFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2203YML-TR (TDFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2203YML-TR (TDFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MIC2203YML-TR is housed in a TDFN-10-EP(3x3) package with 11 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.3V to 5.5V. Key pins include: 1 (SW: Multiplexed I/O & Peripheral Pin SW (General)), 2 (VIN: Power Supply Input (VIN — 2.3V to 5.5V)), 3 (SYNC_IN: Multiplexed I/O & Peripheral Pin SYNC_IN (General)), 4 (SYNC_OUT: Multiplexed I/O & Peripheral Pin SYNC_OUT (CAN)), 5 (EN: System Enable & Hardware Reset (EN)), 6 (FB: Multiplexed I/O & Peripheral Pin FB (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC2203YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2203YML-TR (TDFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 2.30 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2203YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2203YML-TR (MICROCHIP, TDFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MIC2203 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SWDigital_IOSignal terminal SW (I/O, 2.3V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
2VINPower_InPrimary positive power supply input (VIN) operating in the 2.3V to 5.5V domain (Max rating: 5.5V).
3SYNC_INDigital_IOSignal terminal SYNC_IN (I/O, 2.3V to 5.5V domain). Multiplexed alternate functions: SYNC_IN. Supported peripheral buses: General.
4SYNC_OUTDigital_IOSignal terminal SYNC_OUT (I/O, 2.3V to 5.5V domain). Multiplexed alternate functions: SYNC_OUT. Supported peripheral buses: CAN.
5ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
6FBDigital_IOSignal terminal FB (I/O, 2.3V to 5.5V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
7BIASDigital_IOSignal terminal BIAS (I/O, 2.3V to 5.5V domain). Multiplexed alternate functions: BIAS. Supported peripheral buses: CAN.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.