MCP2025T-500E/MD (DFN-8-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP2025T-500E/MD

MICROCHIPDFN-8-EP(4x4) · 9 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP2025T-500E/MD (DFN-8-EP(4x4))1VBB2CS/LWAKE3VSS4LBUS5RXD9GND8VREG7RESET6TXDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=4.00mm · Pitch e=0.80mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VBBI/OMultiplexed I/O & Peripheral Pin VBB (General)
2CS/LWAKEI/OMultiplexed I/O & Peripheral Pin CS/LWAKE (General)
3VSSGNDGround Reference Pin (VSS)
4LBUSI/OMultiplexed I/O & Peripheral Pin LBUS (General)
5RXDI/OMultiplexed I/O & Peripheral Pin RXD (UART)
6TXDI/OMultiplexed I/O & Peripheral Pin TXD (UART)
7RESETISystem Enable & Hardware Reset (RESET)
8VREGI/OMultiplexed I/O & Peripheral Pin VREG (General)
9GNDGNDGround Reference Pin (GND)
PIN 1 VBB
I/O
Multiplexed I/O & Peripheral Pin VBB (General)
Design note: Battery
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(4x4) · 4.00×4.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP2025T-500E/MD (DFN-8-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MCP2025
P1 · p01_fig01377×200px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — LIN Transceiver with Voltage Regulator
LIN Transceiver with Voltage Regulator
P1 · p01_fig02869×1106px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — - MCP2025-500, 8-pin, LIN driver with 5.0V regulator - MCP2025-330, 8-pin, LIN driver with 3.3V regulator | Package Types | MCP2025 PDIP, SOIC | VSS CS/LWAKE | LBUS | 1 2 3 4 | 8 7 6 5 | VBB VREG RESET TXD RXD | MCP2025 4x4 DFN | 1 | 2 | 3
- MCP2025-500, 8-pin, LIN driver with 5.0V regulator - MCP2025-330, 8-pin, LIN driver with 3.3V regulator | Package Types | MCP2025 PDIP, SOIC | VSS CS/LWAKE | LBUS | 1 2 3 4 | 8 7 6 5 | VBB VREG RESET TXD RXD | MCP2025 4x4 DFN | 1 | 2 | 3
P1 · p01_fig03332×251px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — 4
4
P1 · p01_fig02P1
MCP2025T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P1 · p01_fig03P1
MCP2025T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P2 · p02_fig011531×1193px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — MCP2025 Block Diagram
MCP2025 Block Diagram
P12 · p12_fig011582×833px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — FIGURE 1-7: TYPICAL APPLICATION CIRCUIT
FIGURE 1-7: TYPICAL APPLICATION CIRCUIT
P12 · p12_fig021777×838px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — FIGURE 1-8: TYPICAL LIN NETWORK CONFIGURATION
FIGURE 1-8: TYPICAL LIN NETWORK CONFIGURATION
P25 · p25_fig011777×2564px
MCP2025T-500E/MD (DFN-8-EP(4x4)) — MCP2025
MCP2025
P25 · p25_fig01P25
MCP2025T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 25 (p25_fig01)
Datasheet Page 25 (p25_fig01)

Technical Specifications & Part Details (MCP2025T-500E/MD)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP2025T-500E/MD (DFN-8-EP(4x4)) is a 8-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.90 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 6.0-18.0V supply operation across -40°C to +125°C with integrated UART interfaces.
Operating Supply VoltageV_CC / V_DD
6.0-18.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(4x4))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteEPAD 3.00×2.20mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.80mm
Pad Size (W × L)Level B
0.43 × 1.04 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP2025T-500E/MD (DFN-8-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP2025T-500E/MD (DFN-8-EP(4x4))?

Manufactured by MICROCHIP, the MCP2025T-500E/MD is housed in a DFN-8-EP(4x4) package with 9 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 6.0-18.0V. Key pins include: 1 (VBB: Multiplexed I/O & Peripheral Pin VBB (General)), 2 (CS/LWAKE: Multiplexed I/O & Peripheral Pin CS/LWAKE (General)), 3 (VSS: Ground Reference Pin (VSS)), 4 (LBUS: Multiplexed I/O & Peripheral Pin LBUS (General)), 5 (RXD: Multiplexed I/O & Peripheral Pin RXD (UART)), 6 (TXD: Multiplexed I/O & Peripheral Pin TXD (UART)).

What are the IPC-7351B PCB Footprint dimensions for MCP2025T-500E/MD?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP2025T-500E/MD (DFN-8-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.80 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 3.00 × 2.20 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP2025T-500E/MD?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP2025T-500E/MD (MICROCHIP, DFN-8-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP2025 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VBBDigital_IOSignal terminal VBB (I/O, 6.0-18.0V domain). Multiplexed alternate functions: VBB. Supported peripheral buses: General.
2CS/LWAKEDigital_IOSignal terminal CS/LWAKE (I/O, 6.0-18.0V domain). Multiplexed alternate functions: CS/LWAKE. Supported peripheral buses: General.
3VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
4LBUSDigital_IOSignal terminal LBUS (I/O, 6.0-18.0V domain). Multiplexed alternate functions: LBUS. Supported peripheral buses: General.
5RXDDigital_IOSignal terminal RXD (I/O, 6.0-18.0V domain). Multiplexed alternate functions: RXD. Supported peripheral buses: UART.
6TXDDigital_IOSignal terminal TXD (I/O, 6.0-18.0V domain). Multiplexed alternate functions: TXD. Supported peripheral buses: UART.
7RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
8VREGDigital_IOSignal terminal VREG (I/O, 6.0-18.0V domain). Multiplexed alternate functions: VREG. Supported peripheral buses: General.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.