MCP19115T-E/MQ (QFN-28-EP(5x5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP19115T-E/MQ

MICROCHIPQFN-28-EP(5x5) · 29 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP19115T-E/MQ (QFN-28-EP(5x5))1GPA0/AN0/TES2GPA1/AN1/CLK3GPA2/AN2/T0C4GPB4/AN5/ICS5GPA3/AN36GPA7/SCL7GPA6/CCD8GPA5/MCLR#/T9GPB7/CCD10GPB0/SDA11DESATN12DESATP/ISOUT13ISP14ISN15IP29EP28GPB6/AN727GPB5/AN6/ICS26GPB1/AN4/VRE25ICOMP24IFB23VS22VIN21VDD20VDR19PDRV18SDRV17PGND16AGNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=5.00mm · Pitch e=0.50mmD=5.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GPA0/AN0/TEST_OUTI/OMultiplexed I/O & Peripheral Pin GPA0/AN0/TEST_OUT (General)
2GPA1/AN1/CLKPINI/OMultiplexed I/O & Peripheral Pin GPA1/AN1/CLKPIN (General)
3GPA2/AN2/T0CKI/INTI/OMultiplexed I/O & Peripheral Pin GPA2/AN2/T0CKI/INT (General)
4GPB4/AN5/ICSPDATI/OMultiplexed I/O & Peripheral Pin GPB4/AN5/ICSPDAT (General)
5GPA3/AN3I/OMultiplexed I/O & Peripheral Pin GPA3/AN3 (General)
6GPA7/SCLI/OMultiplexed I/O & Peripheral Pin GPA7/SCL (I2C)
7GPA6/CCDI/OMultiplexed I/O & Peripheral Pin GPA6/CCD (General)
8GPA5/MCLR#/TEST_ENI/OMultiplexed I/O & Peripheral Pin GPA5/MCLR#/TEST_EN (General)
9GPB7/CCDI/OMultiplexed I/O & Peripheral Pin GPB7/CCD (General)
10GPB0/SDAI/OMultiplexed I/O & Peripheral Pin GPB0/SDA (I2C)
11DESATNI/OMultiplexed I/O & Peripheral Pin DESATN (General)
12DESATP/ISOUTI/OMultiplexed I/O & Peripheral Pin DESATP/ISOUT (General)
13ISPI/OMultiplexed I/O & Peripheral Pin ISP (General)
14ISNI/OMultiplexed I/O & Peripheral Pin ISN (General)
15IPI/OMultiplexed I/O & Peripheral Pin IP (General)
16AGNDGNDGround Reference Pin (AGND)
17PGNDGNDGround Reference Pin (PGND)
18SDRVI/OMultiplexed I/O & Peripheral Pin SDRV (General)
19PDRVI/OMultiplexed I/O & Peripheral Pin PDRV (General)
20VDRI/OMultiplexed I/O & Peripheral Pin VDR (General)
21VDDPowerPower Supply Input (VDD — 4.5V to 42V)
22VINPowerPower Supply Input (VIN — 4.5V to 42V)
23VSI/OMultiplexed I/O & Peripheral Pin VS (General)
24IFBI/OMultiplexed I/O & Peripheral Pin IFB (General)
25ICOMPI/OMultiplexed I/O & Peripheral Pin ICOMP (General)
26GPB1/AN4/VREF2AnalogMultiplexed I/O & Peripheral Pin GPB1/AN4/VREF2 (General)
27GPB5/AN6/ICSPCLKI/OMultiplexed I/O & Peripheral Pin GPB5/AN6/ICSPCLK (General)
28GPB6/AN7I/OMultiplexed I/O & Peripheral Pin GPB6/AN7 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 GPA0/AN0/TEST_OUT
I/O
Multiplexed I/O & Peripheral Pin GPA0/AN0/TEST_OUT (General)
Design note: Signal terminal GPA0/AN0/TEST_OUT (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA0/AN0/TEST_OUT. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(5x5) · 5.00×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP19115T-E/MQ (QFN-28-EP(5x5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MCP19115
P1 · p01_fig01376×200px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — Digitally Enhanced Power Analog Synchronous Low-Side PWM Controller
Digitally Enhanced Power Analog Synchronous Low-Side PWM Controller
P2 · p02_fig011365×1162px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — MCP19114 | 1 | 2 | 3 | 4 | 5 | 6 13 | 7 | 8 | 9 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 23 | 22 | 21 | 20 | 19 | 24 | EXP-25 | GPA0/AN0/TEST_OUT | GPA1/AN1/CLKPIN | GPA2/AN2/T0CKI/INT | GPA3/AN3 | GPA7/SCL/ICSPCLK | GPA6/CCD/ICSPDAT | GPA
MCP19114 | 1 | 2 | 3 | 4 | 5 | 6 13 | 7 | 8 | 9 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 23 | 22 | 21 | 20 | 19 | 24 | EXP-25 | GPA0/AN0/TEST_OUT | GPA1/AN1/CLKPIN | GPA2/AN2/T0CKI/INT | GPA3/AN3 | GPA7/SCL/ICSPCLK | GPA6/CCD/ICSPDAT | GPA
P47 · p47_fig011780×1246px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 6-1: MOSFET DRIVER DEAD TIME
FIGURE 6-1: MOSFET DRIVER DEAD TIME
P151 · p151_fig011477×798px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 26-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 26-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P151 · p151_fig021353×458px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 26-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 26-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P152 · p152_fig011777×1013px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 26-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 26-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P152 · p152_fig021622×391px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — Note: The Special Event Trigger from the CCD module will not set the interrupt flag bit TMR1IF (bit 0 in the PIR1 register).
Note: The Special Event Trigger from the CCD module will not set the interrupt flag bit TMR1IF (bit 0 in the PIR1 register).
P158 · p158_fig01872×966px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 28-2: MSSP CLIENT BLOCK DIAGRAM (I2C CLIENT MODE)
FIGURE 28-2: MSSP CLIENT BLOCK DIAGRAM (I2C CLIENT MODE)
P158 · p158_fig02867×530px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 28-3: I2C HOST/ CLIENT CONNECTION
FIGURE 28-3: I2C HOST/ CLIENT CONNECTION
P212 · p212_fig011254×853px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — FIGURE 30-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
FIGURE 30-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
P212 · p212_fig01P212
MCP19115T-E/MQ (QFN-28-EP(5x5)) — Datasheet Page 212 (p212_fig01)
Datasheet Page 212 (p212_fig01)
P217 · p217_fig021655×1225px
MCP19115T-E/MQ (QFN-28-EP(5x5)) — Example 28-Lead QFN (5x5x0.9 mm)
Example 28-Lead QFN (5x5x0.9 mm)
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MCP19115T-E/MQ)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP19115T-E/MQ (QFN-28-EP(5x5)) is a 28-pin standard electronic & interconnect component featuring a 5.00 × 5.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 4.5V to 42V supply operation across -40°C to +125°C with integrated I2C, ADC, DAC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 42V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
31.25 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
5 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 5.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-28-EP(5x5))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, ADC, DAC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.25×3.25mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-28-EP(5x5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(5x5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP19115T-E/MQ (QFN-28-EP(5x5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP19115T-E/MQ (QFN-28-EP(5x5))?

Manufactured by MICROCHIP, the MCP19115T-E/MQ is housed in a QFN-28-EP(5x5) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 4.5V to 42V. Key pins include: 1 (GPA0/AN0/TEST_OUT: Multiplexed I/O & Peripheral Pin GPA0/AN0/TEST_OUT (General)), 2 (GPA1/AN1/CLKPIN: Multiplexed I/O & Peripheral Pin GPA1/AN1/CLKPIN (General)), 3 (GPA2/AN2/T0CKI/INT: Multiplexed I/O & Peripheral Pin GPA2/AN2/T0CKI/INT (General)), 4 (GPB4/AN5/ICSPDAT: Multiplexed I/O & Peripheral Pin GPB4/AN5/ICSPDAT (General)), 5 (GPA3/AN3: Multiplexed I/O & Peripheral Pin GPA3/AN3 (General)), 6 (GPA7/SCL: Multiplexed I/O & Peripheral Pin GPA7/SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for MCP19115T-E/MQ?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP19115T-E/MQ (QFN-28-EP(5x5)) has a nominal body envelope of 5.00 × 5.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 3.25 × 3.25 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP19115T-E/MQ?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP19115T-E/MQ (MICROCHIP, QFN-28-EP(5x5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & MCP19115 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GPA0/AN0/TEST_OUTDigital_IOSignal terminal GPA0/AN0/TEST_OUT (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA0/AN0/TEST_OUT. Supported peripheral buses: General.
2GPA1/AN1/CLKPINDigital_IOSignal terminal GPA1/AN1/CLKPIN (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA1/AN1/CLKPIN. Supported peripheral buses: General.
3GPA2/AN2/T0CKI/INTDigital_IOSignal terminal GPA2/AN2/T0CKI/INT (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA2/AN2/T0CKI/INT. Supported peripheral buses: General.
4GPB4/AN5/ICSPDATDigital_IOSignal terminal GPB4/AN5/ICSPDAT (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPB4/AN5/ICSPDAT. Supported peripheral buses: General.
5GPA3/AN3Digital_IOSignal terminal GPA3/AN3 (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA3/AN3. Supported peripheral buses: General.
6GPA7/SCLDigital_IOSignal terminal GPA7/SCL (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA7/SCL. Supported peripheral buses: I2C.
7GPA6/CCDDigital_IOSignal terminal GPA6/CCD (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA6/CCD. Supported peripheral buses: General.
8GPA5/MCLR#/TEST_ENDigital_IOSignal terminal GPA5/MCLR#/TEST_EN (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPA5/MCLR#/TEST_EN. Supported peripheral buses: General.
9GPB7/CCDDigital_IOSignal terminal GPB7/CCD (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPB7/CCD. Supported peripheral buses: General.
10GPB0/SDADigital_IOSignal terminal GPB0/SDA (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPB0/SDA. Supported peripheral buses: I2C.
11DESATNDigital_IOSignal terminal DESATN (I/O, 4.5V to 42V domain). Multiplexed alternate functions: DESATN. Supported peripheral buses: General.
12DESATP/ISOUTDigital_IOSignal terminal DESATP/ISOUT (I/O, 4.5V to 42V domain). Multiplexed alternate functions: DESATP/ISOUT. Supported peripheral buses: General.
13ISPDigital_IOSignal terminal ISP (I/O, 4.5V to 42V domain). Multiplexed alternate functions: ISP. Supported peripheral buses: General.
14ISNDigital_IOSignal terminal ISN (I/O, 4.5V to 42V domain). Multiplexed alternate functions: ISN. Supported peripheral buses: General.
15IPDigital_IOSignal terminal IP (I/O, 4.5V to 42V domain). Multiplexed alternate functions: IP. Supported peripheral buses: General.
16AGNDGND0V electrical ground return terminal (AGND) for internal core logic, I/O drivers, and analog sub-blocks.
17PGNDGND0V electrical ground return terminal (PGND) for internal core logic, I/O drivers, and analog sub-blocks.
18SDRVDigital_IOSignal terminal SDRV (I/O, 4.5V to 42V domain). Multiplexed alternate functions: SDRV. Supported peripheral buses: General.
19PDRVDigital_IOSignal terminal PDRV (I/O, 4.5V to 42V domain). Multiplexed alternate functions: PDRV. Supported peripheral buses: General.
20VDRDigital_IOSignal terminal VDR (I/O, 4.5V to 42V domain). Multiplexed alternate functions: VDR. Supported peripheral buses: General.
21VDDPower_InPrimary positive power supply input (VDD) operating in the 4.5V to 42V domain (Max rating: 42.0V).
22VINPower_InPrimary positive power supply input (VIN) operating in the 4.5V to 42V domain (Max rating: 42.0V).
23VSDigital_IOSignal terminal VS (I/O, 4.5V to 42V domain). Multiplexed alternate functions: VS. Supported peripheral buses: General.
24IFBDigital_IOSignal terminal IFB (I/O, 4.5V to 42V domain). Multiplexed alternate functions: IFB. Supported peripheral buses: General.
25ICOMPDigital_IOSignal terminal ICOMP (I/O, 4.5V to 42V domain). Multiplexed alternate functions: ICOMP. Supported peripheral buses: General.
26GPB1/AN4/VREF2AnalogSignal terminal GPB1/AN4/VREF2 (Analog, 4.5V to 42V domain). Multiplexed alternate functions: GPB1/AN4/VREF2. Supported peripheral buses: General.
27GPB5/AN6/ICSPCLKDigital_IOSignal terminal GPB5/AN6/ICSPCLK (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPB5/AN6/ICSPCLK. Supported peripheral buses: General.
28GPB6/AN7Digital_IOSignal terminal GPB6/AN7 (I/O, 4.5V to 42V domain). Multiplexed alternate functions: GPB6/AN7. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.