MAPLAD30KP45CA (PLAD) — Symbol, Footprint IPC-7351B & 3D STEP Model

MAPLAD30KP45CA

MICROCHIPPLAD · 2 Pins · Pitch 2.00mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MAPLAD30KP45CA (PLAD)1K2AGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
21E=12.40mm · Pitch e=2.00mmD=12.40mm-14-12-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 12.40mm × 12.40mm · Pitch: 2.00mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (2/2)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1KI/OMultiplexed I/O & Peripheral Pin K (General)
2AI/OMultiplexed I/O & Peripheral Pin A (General)
PIN 1 K
I/O
Multiplexed I/O & Peripheral Pin K (General)
Design note: Signal terminal K (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: K. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MAPLAD30KP45CA (PLAD) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MAPLAD30KP45CA (PLAD) - 2. Standard Pinout (Top View)
True package pinout (2 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MAPLAD30KP45CA (PLAD) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MAPLAD30KP45CA (PLAD) - 4. Package Dimensions (D×E×A)
PLAD · 12.40×12.40mm · Pitch 2.00mmExpand ›
5. Recommended Land PatternLAND PATTERN
MAPLAD30KP45CA (PLAD) - 5. Recommended Land Pattern
IPC-7351B Footprint (2 Pads)Expand ›
6. Application SchematicSCHEMATIC
MAPLAD30KP45CA (PLAD) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MXLPLAD30KP6 / MXLPLAD30KP5 / MAPLAD30KP45
P1 · p01_fig01EXACT PACKAGE
MAPLAD30KP45CA (PLAD) — RF01005, Rev G (5/16/14) ©2013 Microsemi Corporation Page 1 of 6
RF01005, Rev G (5/16/14) ©2013 Microsemi Corporation Page 1 of 6
P1 · p01_fig03EXACT PACKAGE
MAPLAD30KP45CA (PLAD) — • Available in both unidirectional and bidirectional construction (bidirectional with CA suffix)
• Available in both unidirectional and bidirectional construction (bidirectional with CA suffix)
P2 · p02_fig01EXACT PACKAGE
MAPLAD30KP45CA (PLAD) — MECHANICAL and PACKAGING
MECHANICAL and PACKAGING
P2 · p02_fig02EXACT PACKAGE
MAPLAD30KP45CA (PLAD) — PART NOMENCLATURE M PLAD 30K P 14 CA (e3)
PART NOMENCLATURE M PLAD 30K P 14 CA (e3)
P2 · p02_fig03EXACT PACKAGE
MAPLAD30KP45CA (PLAD) — SYMBOLS & DEFINITIONS
SYMBOLS & DEFINITIONS
P1 · p01_fig02404×217px
MAPLAD30KP45CA (PLAD) — High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION
High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION
P2 · p02_fig02P2
MAPLAD30KP45CA (PLAD) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P6 · p06_fig01884×878px
MAPLAD30KP45CA (PLAD) — PACKAGE DIMENSIONS
PACKAGE DIMENSIONS
P6 · p06_fig02652×544px
MAPLAD30KP45CA (PLAD) — PAD LAYOUT
PAD LAYOUT
P6 · p06_fig01P6
MAPLAD30KP45CA (PLAD) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)

Technical Specifications & Part Details (MAPLAD30KP45CA)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MAPLAD30KP45CA (PLAD) is a 2-pin standard electronic & interconnect component featuring a 12.40 × 12.40 × 0.95 mm mechanical envelope (lead pitch e = 2.00 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
12.40 × 12.40 × 0.95 mm (A1=0.10 mm)
Package family: OTHER (PLAD)
Pin Count & Lead PitchN / e
2 Pins | Pitch e = 2.00 mm (78.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol2 auto-grouped pins
OK
IPC-7351B Land Pattern2 pads · Pitch 2.00mm
OK
IPC-7525 60% Solder PasteEPAD 15.70×12.00mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PLAD)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
12.40 × 12.40 mm
Height (A) & Pitch (e)IPC-7351B
A=0.95mm · e=2.00mm
Pad Size (W × L)Level B
1.70 × 0.90 mm
Pins / Total PadsTopology
2P / 2Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PLAD
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MAPLAD30KP45CA (PLAD)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MAPLAD30KP45CA (PLAD)?

Manufactured by MICROCHIP, the MAPLAD30KP45CA is housed in a PLAD package with 2 pins and a 2.00 mm lead pitch. Key pins include: 1 (K: Multiplexed I/O & Peripheral Pin K (General)), 2 (A: Multiplexed I/O & Peripheral Pin A (General)).

What are the IPC-7351B PCB Footprint dimensions for MAPLAD30KP45CA?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MAPLAD30KP45CA (PLAD) has a nominal body envelope of 12.40 × 12.40 mm, pitch e = 2.00 mm, and 2 copper pads plus a central exposed thermal pad (EPAD) of 15.70 × 12.00 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MAPLAD30KP45CA?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MAPLAD30KP45CA (MICROCHIP, PLAD) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (2 pins) & MXLPLAD30KP6 / MXLPLAD30KP5 / MAPLAD30KP45 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1KDigital_IOSignal terminal K (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: K. Supported peripheral buses: General.
2ADigital_IOSignal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.