ENC28J60T-I/SS (SSOP-28-208mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

ENC28J60T-I/SS

MICROCHIPSSOP-28-208mil · 28 Pins · Pitch 0.65mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ENC28J60T-I/SS (SSOP-28-208mil)1VCAP2VSS3CLKOUT4INT#5NC6SO7SI8SCK9CS#10RESET#11VSSRX12TPIN-13TPIN+14RBIAS28VDD27LEDA26LEDB25VDDOSC24OSC223OSC122VSSOSC21VSSPLL20VDDPLL19VDDRX18VSSTX17TPOUT+16TPOUT-15VDDTXGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
12345678910111213141516171819202122232425262728E=5.30mm · Pitch e=0.65mmD=10.20mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 5.30mm × 10.20mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
2VSSGNDGround Reference Pin (VSS)
3CLKOUTI/OMultiplexed I/O & Peripheral Pin CLKOUT (General)
4INT#I/OMultiplexed I/O & Peripheral Pin INT# (General)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6SOI/OMultiplexed I/O & Peripheral Pin SO (General)
7SII/OMultiplexed I/O & Peripheral Pin SI (General)
8SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
9CS#I/OMultiplexed I/O & Peripheral Pin CS# (General)
10RESET#ISystem Enable & Hardware Reset (RESET#)
11VSSRXGNDGround Reference Pin (VSSRX)
12TPIN-I/OMultiplexed I/O & Peripheral Pin TPIN- (General)
13TPIN+I/OMultiplexed I/O & Peripheral Pin TPIN+ (General)
14RBIASI/OMultiplexed I/O & Peripheral Pin RBIAS (General)
15VDDTXPowerPower Supply Input (VDDTX — 3.1V to 3.6V)
16TPOUT-I/OMultiplexed I/O & Peripheral Pin TPOUT- (General)
17TPOUT+I/OMultiplexed I/O & Peripheral Pin TPOUT+ (General)
18VSSTXGNDGround Reference Pin (VSSTX)
19VDDRXPowerPower Supply Input (VDDRX — 3.1V to 3.6V)
20VDDPLLPowerPower Supply Input (VDDPLL — 3.1V to 3.6V)
21VSSPLLGNDGround Reference Pin (VSSPLL)
22VSSOSCGNDGround Reference Pin (VSSOSC)
23OSC1I/OMultiplexed I/O & Peripheral Pin OSC1 (RTC/CLK)
24OSC2I/OMultiplexed I/O & Peripheral Pin OSC2 (RTC/CLK)
25VDDOSCPowerPower Supply Input (VDDOSC — 3.1V to 3.6V)
26LEDBI/OMultiplexed I/O & Peripheral Pin LEDB (General)
27LEDAI/OMultiplexed I/O & Peripheral Pin LEDA (General)
28VDDPowerPower Supply Input (VDD — 3.1V to 3.6V)
PIN 1 VCAP
I/O
Multiplexed I/O & Peripheral Pin VCAP (General)
Design note: Signal terminal VCAP (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ENC28J60T-I/SS (SSOP-28-208mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ENC28J60T-I/SS (SSOP-28-208mil) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ENC28J60T-I/SS (SSOP-28-208mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ENC28J60T-I/SS (SSOP-28-208mil) - 4. Package Dimensions (D×E×A)
SSOP-28-208mil · 5.30×10.20mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
ENC28J60T-I/SS (SSOP-28-208mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
ENC28J60T-I/SS (SSOP-28-208mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for ENC28J60T
P1 · p01_fig01377×200px
ENC28J60T-I/SS (SSOP-28-208mil) — Stand-Alone Ethernet Controller with SPI Interface
Stand-Alone Ethernet Controller with SPI Interface
P1 · p01_fig021777×1795px
ENC28J60T-I/SS (SSOP-28-208mil) —  2006-2012 Microchip Technology Inc. . DS39662E-page 1 | Buffer | Medium Access Controller (MAC) Features | Physical Layer (PHY) Features | • Loopback mode • Two Programmable LED Outputs for LINK, TX, RX, Collision and Full/Half-Duplex Sta
 2006-2012 Microchip Technology Inc. . DS39662E-page 1 | Buffer | Medium Access Controller (MAC) Features | Physical Layer (PHY) Features | • Loopback mode • Two Programmable LED Outputs for LINK, TX, RX, Collision and Full/Half-Duplex Sta
P3 · p03_fig011777×1505px
ENC28J60T-I/SS (SSOP-28-208mil) — FIGURE 1-1: ENC28J60 BLOCK DIAGRAM
FIGURE 1-1: ENC28J60 BLOCK DIAGRAM
P4 · p04_fig02P4
ENC28J60T-I/SS (SSOP-28-208mil) — Datasheet Page 4 (p04_fig02)
Datasheet Page 4 (p04_fig02)
P5 · p05_fig011783×720px
ENC28J60T-I/SS (SSOP-28-208mil) — FIGURE 2-2: EXTERNAL CLOCK SOURCE(1)
FIGURE 2-2: EXTERNAL CLOCK SOURCE(1)
P5 · p05_fig02867×633px
ENC28J60T-I/SS (SSOP-28-208mil) — FIGURE 2-2: EXTERNAL CLOCK SOURCE(1)
FIGURE 2-2: EXTERNAL CLOCK SOURCE(1)
P5 · p05_fig01P5
ENC28J60T-I/SS (SSOP-28-208mil) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)
P6 · p06_fig011777×476px
ENC28J60T-I/SS (SSOP-28-208mil) — FIGURE 2-3: CLKOUT TRANSITION
FIGURE 2-3: CLKOUT TRANSITION
P6 · p06_fig021263×604px
ENC28J60T-I/SS (SSOP-28-208mil) — REGISTER 2-1: ECOCON: CLOCK OUTPUT CONTROL REGISTER | U-0 U-0 U-0 U-0 U-0 R/W-1 R/W-0 R/W-0 | - - - - - COCON2 COCON1 COCON0 | bit 7 bit 0 | Legend: | R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ | -n = Value at POR
REGISTER 2-1: ECOCON: CLOCK OUTPUT CONTROL REGISTER | U-0 U-0 U-0 U-0 U-0 R/W-1 R/W-0 R/W-0 | - - - - - COCON2 COCON1 COCON0 | bit 7 bit 0 | Legend: | R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ | -n = Value at POR
P83 · p83_fig011777×2563px
ENC28J60T-I/SS (SSOP-28-208mil) — ENC28J60
ENC28J60
P4 · p04_fig01All Packages in PDF
ENC28J60T-I/SS (SSOP-28-208mil) — FIGURE 1-2: TYPICAL ENC28J60 BASED INTERFACE
FIGURE 1-2: TYPICAL ENC28J60 BASED INTERFACE
P4 · p04_fig02All Packages in PDF
ENC28J60T-I/SS (SSOP-28-208mil) — LEDB
LEDB

Technical Specifications & Part Details (ENC28J60T-I/SS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ENC28J60T-I/SS (SSOP-28-208mil) is a 28-pin standard electronic & interconnect component featuring a 10.20 × 5.30 × 2.00 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3.1V to 3.6V supply operation across -40°C to +85°C with integrated SPI, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.1V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.20 × 5.30 × 2.00 mm (A1=0.15 mm)
Package family: TSSOP (SSOP-28-208mil)
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SSOP-28-208mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.20 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.60 mm
Pins / Total PadsTopology
28P / 28Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SSOP-28-208mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ENC28J60T-I/SS (SSOP-28-208mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ENC28J60T-I/SS (SSOP-28-208mil)?

Manufactured by MICROCHIP, the ENC28J60T-I/SS is housed in a SSOP-28-208mil package with 28 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3.1V to 3.6V. Key pins include: 1 (VCAP: Multiplexed I/O & Peripheral Pin VCAP (General)), 2 (VSS: Ground Reference Pin (VSS)), 3 (CLKOUT: Multiplexed I/O & Peripheral Pin CLKOUT (General)), 4 (INT#: Multiplexed I/O & Peripheral Pin INT# (General)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (SO: Multiplexed I/O & Peripheral Pin SO (General)).

What are the IPC-7351B PCB Footprint dimensions for ENC28J60T-I/SS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ENC28J60T-I/SS (SSOP-28-208mil) has a nominal body envelope of 5.30 × 10.20 mm, pitch e = 0.65 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ENC28J60T-I/SS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ENC28J60T-I/SS (MICROCHIP, SSOP-28-208mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & ENC28J60T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VCAPDigital_IOSignal terminal VCAP (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
2VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
3CLKOUTDigital_IOSignal terminal CLKOUT (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: CLKOUT. Supported peripheral buses: General.
4INT#Digital_IOSignal terminal INT# (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: INT#. Supported peripheral buses: General.
5NCNCSignal terminal NC (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6SODigital_IOSignal terminal SO (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
7SIDigital_IOSignal terminal SI (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
8SCKDigital_IOSignal terminal SCK (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
9CS#Digital_IOSignal terminal CS# (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
10RESET#Digital_IOActive-low hardware reset terminal (RESET#): pulling this pin Low resets the processor core and peripherals.
11VSSRXGND0V electrical ground return terminal (VSSRX) for internal core logic, I/O drivers, and analog sub-blocks.
12TPIN-Digital_IOSignal terminal TPIN- (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: TPIN-. Supported peripheral buses: General.
13TPIN+Digital_IOSignal terminal TPIN+ (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: TPIN+. Supported peripheral buses: General.
14RBIASDigital_IOSignal terminal RBIAS (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: RBIAS. Supported peripheral buses: General.
15VDDTXPower_InPrimary positive power supply input (VDDTX) operating in the 3.1V to 3.6V domain (Max rating: 3.6V).
16TPOUT-Digital_IOSignal terminal TPOUT- (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: TPOUT-. Supported peripheral buses: General.
17TPOUT+Digital_IOSignal terminal TPOUT+ (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: TPOUT+. Supported peripheral buses: General.
18VSSTXGND0V electrical ground return terminal (VSSTX) for internal core logic, I/O drivers, and analog sub-blocks.
19VDDRXPower_InPrimary positive power supply input (VDDRX) operating in the 3.1V to 3.6V domain (Max rating: 3.6V).
20VDDPLLPower_InPrimary positive power supply input (VDDPLL) operating in the 3.1V to 3.6V domain (Max rating: 3.6V).
21VSSPLLGND0V electrical ground return terminal (VSSPLL) for internal core logic, I/O drivers, and analog sub-blocks.
22VSSOSCGND0V electrical ground return terminal (VSSOSC) for internal core logic, I/O drivers, and analog sub-blocks.
23OSC1Digital_IOSignal terminal OSC1 (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: OSC1. Supported peripheral buses: RTC/CLK.
24OSC2Digital_IOSignal terminal OSC2 (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: OSC2. Supported peripheral buses: RTC/CLK.
25VDDOSCPower_InPrimary positive power supply input (VDDOSC) operating in the 3.1V to 3.6V domain (Max rating: 3.6V).
26LEDBDigital_IOSignal terminal LEDB (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: LEDB. Supported peripheral buses: General.
27LEDADigital_IOSignal terminal LEDA (I/O, 3.1V to 3.6V domain). Multiplexed alternate functions: LEDA. Supported peripheral buses: General.
28VDDPower_InPrimary positive power supply input (VDD) operating in the 3.1V to 3.6V domain (Max rating: 3.6V).