EMC2105-BP-TR (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

EMC2105-BP-TR

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · EMC2105-BP-TR (QFN-20-EP(4x4))1Internal2DP1 / VREF_T3GND4VDD5ALERT#6CLK IN / GPI7SYS SHDN#_8SMDATA9SMCLK10TACH111FAN_OUT21EP20DP2 / VREF_T19DN2 / VIN218DP3 / DN4 / 17DN3/DP4/VIN316SHDN_SEL15TRIP SET / V14VDD_5V13VDD_5V12FAN_OUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1InternalI/OMultiplexed I/O & Peripheral Pin Internal (General)
2DP1 / VREF_T1AnalogMultiplexed I/O & Peripheral Pin DP1 / VREF_T1 (General)
3GNDGNDGround Reference Pin (GND)
4VDDPowerPower Supply Input (VDD — 3V to 3.6V)
5ALERT#I/OMultiplexed I/O & Peripheral Pin ALERT# (General)
6CLK IN / GPIO1_I/OMultiplexed I/O & Peripheral Pin CLK IN / GPIO1_ (General)
7SYS SHDN#_I/OMultiplexed I/O & Peripheral Pin SYS SHDN#_ (General)
8SMDATAI/OMultiplexed I/O & Peripheral Pin SMDATA (General)
9SMCLKI/OMultiplexed I/O & Peripheral Pin SMCLK (General)
10TACH1I/OMultiplexed I/O & Peripheral Pin TACH1 (General)
11FAN_OUTI/OMultiplexed I/O & Peripheral Pin FAN_OUT (General)
12FAN_OUTI/OMultiplexed I/O & Peripheral Pin FAN_OUT (General)
13VDD_5VPowerPower Supply Input (VDD_5V — 3V to 3.6V)
14VDD_5VPowerPower Supply Input (VDD_5V — 3V to 3.6V)
15TRIP SET / VIN4_PowerPower Supply Input (TRIP SET / VIN4_ — 3V to 3.6V)
16SHDN_SELI/OMultiplexed I/O & Peripheral Pin SHDN_SEL (General)
17DN3/DP4/VIN3PowerPower Supply Input (DN3/DP4/VIN3 — 3V to 3.6V)
18DP3 / DN4 / VREF_T3AnalogMultiplexed I/O & Peripheral Pin DP3 / DN4 / VREF_T3 (General)
19DN2 / VIN2PowerPower Supply Input (DN2 / VIN2 — 3V to 3.6V)
20DP2 / VREF_T2AnalogMultiplexed I/O & Peripheral Pin DP2 / VREF_T2 (General)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 Internal
I/O
Multiplexed I/O & Peripheral Pin Internal (General)
Design note: Signal terminal Internal (I/O, 3V to 3.6V domain). Multiplexed alternate functions: Internal. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
EMC2105-BP-TR (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
EMC2105-BP-TR (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
EMC2105-BP-TR (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
EMC2105-BP-TR (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
EMC2105-BP-TR (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
EMC2105-BP-TR (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for EMC2105
P1 · p01_fig01847×157px
EMC2105-BP-TR (QFN-20-EP(4x4)) — RPM-Based High Side Fan Controller with Hardware Thermal Shutdown
RPM-Based High Side Fan Controller with Hardware Thermal Shutdown
P10 · p10_fig011569×1549px
EMC2105-BP-TR (QFN-20-EP(4x4)) — Figure 2.1 EMC2105 Pin Diagram (20 Pin QFN)
Figure 2.1 EMC2105 Pin Diagram (20 Pin QFN)
P10 · p10_fig01P10
EMC2105-BP-TR (QFN-20-EP(4x4)) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)
P74 · p74_fig011367×2060px
EMC2105-BP-TR (QFN-20-EP(4x4)) — Figure 7.1 EMC2105 20-Pin 4x4mm QFN Package Outline and Parameters
Figure 7.1 EMC2105 20-Pin 4x4mm QFN Package Outline and Parameters
P74 · p74_fig01P74
EMC2105-BP-TR (QFN-20-EP(4x4)) — Datasheet Page 74 (p74_fig01)
Datasheet Page 74 (p74_fig01)

Technical Specifications & Part Details (EMC2105-BP-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:EMC2105-BP-TR (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3V to 3.6V supply operation across 60°C to 100°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
60°C to 100°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — EMC2105-BP-TR (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of EMC2105-BP-TR (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the EMC2105-BP-TR is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3V to 3.6V. Key pins include: 1 (Internal: Multiplexed I/O & Peripheral Pin Internal (General)), 2 (DP1 / VREF_T1: Multiplexed I/O & Peripheral Pin DP1 / VREF_T1 (General)), 3 (GND: Ground Reference Pin (GND)), 4 (VDD: Power Supply Input (VDD — 3V to 3.6V)), 5 (ALERT#: Multiplexed I/O & Peripheral Pin ALERT# (General)), 6 (CLK IN / GPIO1_: Multiplexed I/O & Peripheral Pin CLK IN / GPIO1_ (General)).

What are the IPC-7351B PCB Footprint dimensions for EMC2105-BP-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), EMC2105-BP-TR (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for EMC2105-BP-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for EMC2105-BP-TR (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & EMC2105 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1InternalDigital_IOSignal terminal Internal (I/O, 3V to 3.6V domain). Multiplexed alternate functions: Internal. Supported peripheral buses: General.
2DP1 / VREF_T1AnalogSignal terminal DP1 / VREF_T1 (Analog, 3V to 3.6V domain). Multiplexed alternate functions: DP1 / VREF_T1. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4VDDPower_InPrimary positive power supply input (VDD) operating in the 3V to 3.6V domain (Max rating: 3.6V).
5ALERT#Digital_IOSignal terminal ALERT# (I/O, 3V to 3.6V domain). Multiplexed alternate functions: ALERT#. Supported peripheral buses: General.
6CLK IN / GPIO1_Digital_IOSignal terminal CLK IN / GPIO1_ (I/O, 3V to 3.6V domain). Multiplexed alternate functions: CLK IN / GPIO1_. Supported peripheral buses: General.
7SYS SHDN#_Digital_IOSignal terminal SYS SHDN#_ (I/O, 3V to 3.6V domain). Multiplexed alternate functions: SYS SHDN#_. Supported peripheral buses: General.
8SMDATADigital_IOSignal terminal SMDATA (I/O, 3V to 3.6V domain). Multiplexed alternate functions: SMDATA. Supported peripheral buses: General.
9SMCLKDigital_IOSignal terminal SMCLK (I/O, 3V to 3.6V domain). Multiplexed alternate functions: SMCLK. Supported peripheral buses: General.
10TACH1Digital_IOSignal terminal TACH1 (I/O, 3V to 3.6V domain). Multiplexed alternate functions: TACH1. Supported peripheral buses: General.
11FAN_OUTDigital_IOSignal terminal FAN_OUT (I/O, 3V to 3.6V domain). Multiplexed alternate functions: FAN_OUT. Supported peripheral buses: General.
12FAN_OUTDigital_IOSignal terminal FAN_OUT (I/O, 3V to 3.6V domain). Multiplexed alternate functions: FAN_OUT. Supported peripheral buses: General.
13VDD_5VPower_InPrimary positive power supply input (VDD_5V) operating in the 3V to 3.6V domain (Max rating: 3.6V).
14VDD_5VPower_InPrimary positive power supply input (VDD_5V) operating in the 3V to 3.6V domain (Max rating: 3.6V).
15TRIP SET / VIN4_Power_InPrimary positive power supply input (TRIP SET / VIN4_) operating in the 3V to 3.6V domain (Max rating: 3.6V).
16SHDN_SELDigital_IOSignal terminal SHDN_SEL (I/O, 3V to 3.6V domain). Multiplexed alternate functions: SHDN_SEL. Supported peripheral buses: General.
17DN3/DP4/VIN3Power_InPrimary positive power supply input (DN3/DP4/VIN3) operating in the 3V to 3.6V domain (Max rating: 3.6V).
18DP3 / DN4 / VREF_T3AnalogSignal terminal DP3 / DN4 / VREF_T3 (Analog, 3V to 3.6V domain). Multiplexed alternate functions: DP3 / DN4 / VREF_T3. Supported peripheral buses: General.
19DN2 / VIN2Power_InPrimary positive power supply input (DN2 / VIN2) operating in the 3V to 3.6V domain (Max rating: 3.6V).
20DP2 / VREF_T2AnalogSignal terminal DP2 / VREF_T2 (Analog, 3V to 3.6V domain). Multiplexed alternate functions: DP2 / VREF_T2. Supported peripheral buses: General.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.