DN3765K4-G (TO-252(DPAK)) — Symbol, Footprint IPC-7351B & 3D STEP Model

DN3765K4-G

MICROCHIPTO-252(DPAK) · 3 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · DN3765K4-G (TO-252(DPAK))1G2S3DGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
312E=6.50mm · Pitch e=0.50mmD=6.10mm-9-7-5-3-113576420-2-4-6mm
3. 3D CAD MODEL
Package Body: 6.50mm × 6.10mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GI/OMultiplexed I/O & Peripheral Pin G (General)
2SI/OMultiplexed I/O & Peripheral Pin S (General)
3DI/OMultiplexed I/O & Peripheral Pin D (General)
PIN 1 G
I/O
Multiplexed I/O & Peripheral Pin G (General)
Design note: Signal terminal G (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: G. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
DN3765K4-G (TO-252(DPAK)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
DN3765K4-G (TO-252(DPAK)) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
DN3765K4-G (TO-252(DPAK)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
DN3765K4-G (TO-252(DPAK)) - 4. Package Dimensions (D×E×A)
TO-252(DPAK) · 6.50×6.10mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
DN3765K4-G (TO-252(DPAK)) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
DN3765K4-G (TO-252(DPAK)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for DN3765
P1 · p01_fig01EXACT PACKAGE
DN3765K4-G (TO-252(DPAK)) — Pin Configuration
Pin Configuration
P3 · p03_fig01EXACT PACKAGE
DN3765K4-G (TO-252(DPAK)) — Note: 1. Although 4 terminal locations are shown, only 3 are functional. Lead number 2 was removed.
Note: 1. Although 4 terminal locations are shown, only 3 are functional. Lead number 2 was removed.
P1 · p01_fig01P1
DN3765K4-G (TO-252(DPAK)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig012034×847px
DN3765K4-G (TO-252(DPAK)) — 2 Supertex inc. | www.supertex.com | Doc.# DSFP-DN3765 A070113 | Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. | Switching Waveform
2 Supertex inc. | www.supertex.com | Doc.# DSFP-DN3765 A070113 | Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. | Switching Waveform
P3 · p03_fig01P3
DN3765K4-G (TO-252(DPAK)) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)

Technical Specifications & Part Details (DN3765K4-G)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:DN3765K4-G (TO-252(DPAK)) is a 3-pin standard electronic & interconnect component featuring a 6.50 × 6.10 × 2.30 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1.0MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.50 × 6.10 × 2.30 mm (A1=0.06 mm)
Package family: TO252 (TO-252(DPAK))
Pin Count & Lead PitchN / e
3 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-252(DPAK))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.50 × 6.10 mm
Height (A) & Pitch (e)IPC-7351B
A=2.30mm · e=0.50mm
Pad Size (W × L)Level B
1.60 × 3.00 mm
Pins / Total PadsTopology
3P / 3Pad (SOT_TAB)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-252(DPAK)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — DN3765K4-G (TO-252(DPAK))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of DN3765K4-G (TO-252(DPAK))?

Manufactured by MICROCHIP, the DN3765K4-G is housed in a TO-252(DPAK) package with 3 pins and a 0.50 mm lead pitch. Key pins include: 1 (G: Multiplexed I/O & Peripheral Pin G (General)), 2 (S: Multiplexed I/O & Peripheral Pin S (General)), 3 (D: Multiplexed I/O & Peripheral Pin D (General)).

What are the IPC-7351B PCB Footprint dimensions for DN3765K4-G?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), DN3765K4-G (TO-252(DPAK)) has a nominal body envelope of 6.10 × 6.50 mm, pitch e = 0.50 mm, and 3 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for DN3765K4-G?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for DN3765K4-G (MICROCHIP, TO-252(DPAK)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & DN3765 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GDigital_IOSignal terminal G (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: G. Supported peripheral buses: General.
2SDigital_IOSignal terminal S (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: S. Supported peripheral buses: General.
3DDigital_IOSignal terminal D (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D. Supported peripheral buses: General.