ATTINY4313-SUR (SOIC-20-300mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY4313-SUR

MICROCHIPSOIC-20-300mil · 20 Pins · Pitch 1.27mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY4313-SUR (SOIC-20-300mil)1(PCINT10/RES2(PCINT11/RXD3(PCINT12/TXD4(PCINT9/XTAL5(PCINT8/CLKI6IO37(PCINT14/INT8(PCINT15/T0)9(PCINT16/OC010GND20VCC19IO2018(MISO/DO/PCI17IO816(OC1B/PCINT415(OC1A/PCINT314(OC0A/PCINT213(AIN1/PCINT112(AIN0/PCINT011(ICPI/PCINT1Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617181920E=7.50mm · Pitch e=1.27mmD=12.80mm-9-7-5-3-11357997531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 7.50mm × 12.80mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (20/20)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1(PCINT10/RESET#/dW)PA2ISystem Enable & Hardware Reset ((PCINT10/RESET#/dW)PA2)
2(PCINT11/RXD)PD0I/OMultiplexed I/O & Peripheral Pin (PCINT11/RXD)PD0 (UART)
3(PCINT12/TXD)PD1I/OMultiplexed I/O & Peripheral Pin (PCINT12/TXD)PD1 (UART)
4(PCINT9/XTAL2)PA1I/OMultiplexed I/O & Peripheral Pin (PCINT9/XTAL2)PA1 (RTC/CLK)
5(PCINT8/CLKI/XTAL1)PA0I/OMultiplexed I/O & Peripheral Pin (PCINT8/CLKI/XTAL1)PA0 (RTC/CLK)
6IO3I/OGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7(PCINT14/INT1)PD3I/OMultiplexed I/O & Peripheral Pin (PCINT14/INT1)PD3 (General)
8(PCINT15/T0)PD4I/OMultiplexed I/O & Peripheral Pin (PCINT15/T0)PD4 (General)
9(PCINT16/OC0B/T1)PD5I/OMultiplexed I/O & Peripheral Pin (PCINT16/OC0B/T1)PD5 (PWM)
10GNDGNDGround Reference Pin (GND)
11(ICPI/PCINT17)PD6I/OMultiplexed I/O & Peripheral Pin (ICPI/PCINT17)PD6 (General)
12(AIN0/PCINT0)PB0I/OMultiplexed I/O & Peripheral Pin (AIN0/PCINT0)PB0 (ADC)
13(AIN1/PCINT1)PB1I/OMultiplexed I/O & Peripheral Pin (AIN1/PCINT1)PB1 (ADC)
14(OC0A/PCINT2)PB2I/OMultiplexed I/O & Peripheral Pin (OC0A/PCINT2)PB2 (PWM)
15(OC1A/PCINT3)PB3I/OMultiplexed I/O & Peripheral Pin (OC1A/PCINT3)PB3 (PWM)
16(OC1B/PCINT4)PB4I/OMultiplexed I/O & Peripheral Pin (OC1B/PCINT4)PB4 (PWM)
17IO8I/OGPIO8 / RTC_GPIO8 / TOUCH8 / ADC1_CH7 / SUBSPICS1
18(MISO/DO/PCINT6)PB6I/OMultiplexed I/O & Peripheral Pin (MISO/DO/PCINT6)PB6 (SPI)
19IO20I/OGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 (PCINT10/RESET#/dW)PA2
I
System Enable & Hardware Reset ((PCINT10/RESET#/dW)PA2)
Design note: Active-low hardware reset terminal ((PCINT10/RESET#/dW)PA2): pulling this pin Low resets the processor core and peripherals.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY4313-SUR (SOIC-20-300mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY4313-SUR (SOIC-20-300mil) - 2. Standard Pinout (Top View)
True package pinout (20 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY4313-SUR (SOIC-20-300mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY4313-SUR (SOIC-20-300mil) - 4. Package Dimensions (D×E×A)
SOIC-20-300mil · 7.50×12.80mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY4313-SUR (SOIC-20-300mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (20 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY4313-SUR (SOIC-20-300mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for ATTINY4313
P1 · p01_fig01652×376px
ATTINY4313-SUR (SOIC-20-300mil) — 8-bit Microcontroller with 2/4K Bytes In-System Programmable Flash
8-bit Microcontroller with 2/4K Bytes In-System Programmable Flash
P2 · p02_fig011326×2052px
ATTINY4313-SUR (SOIC-20-300mil) — Figure 1-1. Pinout ATtiny2313A/4313
Figure 1-1. Pinout ATtiny2313A/4313
P2 · p02_fig01P2
ATTINY4313-SUR (SOIC-20-300mil) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P17 · p17_fig012128×2773px
ATTINY4313-SUR (SOIC-20-300mil) — 17 | 8246BS-AVR-09/11 | ATtiny2313A/4313 | 7.4 20M2 | 10/24/08 | 15 | 14 | 13 | 12 | 11 | 1 | 2 | 3 | 4 | 5 | 16 17 18 19 20 | 10 9 8 7 6 | D2 | E2 | e | b | K L | Pin #1 Chamfer (C 0.3) | D | E SIDE VIEW | A1 | y | Pin 1 ID | BOTTOM VIEW |
17 | 8246BS-AVR-09/11 | ATtiny2313A/4313 | 7.4 20M2 | 10/24/08 | 15 | 14 | 13 | 12 | 11 | 1 | 2 | 3 | 4 | 5 | 16 17 18 19 20 | 10 9 8 7 6 | D2 | E2 | e | b | K L | Pin #1 Chamfer (C 0.3) | D | E SIDE VIEW | A1 | y | Pin 1 ID | BOTTOM VIEW |
P17 · p17_fig01P17
ATTINY4313-SUR (SOIC-20-300mil) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)
P14 · p14_fig01All Packages in PDF
ATTINY4313-SUR (SOIC-20-300mil) — 14 | 8246BS-AVR-09/11 ATtiny2313A/4313 | 7. Packaging Information | 7.1 20P3 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 | 2010-10-19
14 | 8246BS-AVR-09/11 ATtiny2313A/4313 | 7. Packaging Information | 7.1 20P3 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 | 2010-10-19
P16 · p16_fig01All Packages in PDF
ATTINY4313-SUR (SOIC-20-300mil) — 16 | 8246BS-AVR-09/11 ATtiny2313A/4313 | 7.3 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, A 20M1 | 10/27/04 | 2.6 mm Exposed Pad, Micro Lead Frame Packa
16 | 8246BS-AVR-09/11 ATtiny2313A/4313 | 7.3 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, A 20M1 | 10/27/04 | 2.6 mm Exposed Pad, Micro Lead Frame Packa

Technical Specifications & Part Details (ATTINY4313-SUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY4313-SUR (SOIC-20-300mil) is a 20-pin standard electronic & interconnect component featuring a 12.80 × 7.50 × 2.50 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated UART, SPI, I2C, PWM, ADC, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
12.80 × 7.50 × 2.50 mm (A1=0.10 mm)
Package family: SOIC (SOIC-20-300mil)
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, PWM, ADC, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol20 auto-grouped pins
OK
IPC-7351B Land Pattern20 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — ATTINY4313 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOIC-20-300mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
12.80 × 7.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.50mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.90 mm
Pins / Total PadsTopology
20P / 20Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-20-300mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY4313-SUR (SOIC-20-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY4313-SUR (SOIC-20-300mil)?

Manufactured by MICROCHIP, the ATTINY4313-SUR is housed in a SOIC-20-300mil package with 20 pins and a 1.27 mm lead pitch. Key pins include: 1 ((PCINT10/RESET#/dW)PA2: System Enable & Hardware Reset ((PCINT10/RESET#/dW)PA2)), 2 ((PCINT11/RXD)PD0: Multiplexed I/O & Peripheral Pin (PCINT11/RXD)PD0 (UART)), 3 ((PCINT12/TXD)PD1: Multiplexed I/O & Peripheral Pin (PCINT12/TXD)PD1 (UART)), 4 ((PCINT9/XTAL2)PA1: Multiplexed I/O & Peripheral Pin (PCINT9/XTAL2)PA1 (RTC/CLK)), 5 ((PCINT8/CLKI/XTAL1)PA0: Multiplexed I/O & Peripheral Pin (PCINT8/CLKI/XTAL1)PA0 (RTC/CLK)), 6 (IO3: GPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY4313-SUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY4313-SUR (SOIC-20-300mil) has a nominal body envelope of 7.50 × 12.80 mm, pitch e = 1.27 mm, and 20 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY4313-SUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY4313-SUR (MICROCHIP, SOIC-20-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (20 pins) & ATTINY4313 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1(PCINT10/RESET#/dW)PA2Digital_IOActive-low hardware reset terminal ((PCINT10/RESET#/dW)PA2): pulling this pin Low resets the processor core and peripherals.
2(PCINT11/RXD)PD0Digital_IOSignal terminal (PCINT11/RXD)PD0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT11/RXD)PD0. Supported peripheral buses: UART.
3(PCINT12/TXD)PD1Digital_IOSignal terminal (PCINT12/TXD)PD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT12/TXD)PD1. Supported peripheral buses: UART.
4(PCINT9/XTAL2)PA1Digital_IOSignal terminal (PCINT9/XTAL2)PA1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT9/XTAL2)PA1. Supported peripheral buses: RTC/CLK.
5(PCINT8/CLKI/XTAL1)PA0Digital_IOSignal terminal (PCINT8/CLKI/XTAL1)PA0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT8/CLKI/XTAL1)PA0. Supported peripheral buses: RTC/CLK.
6IO3Digital_IOGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7(PCINT14/INT1)PD3Digital_IOSignal terminal (PCINT14/INT1)PD3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT14/INT1)PD3. Supported peripheral buses: General.
8(PCINT15/T0)PD4Digital_IOSignal terminal (PCINT15/T0)PD4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT15/T0)PD4. Supported peripheral buses: General.
9(PCINT16/OC0B/T1)PD5Digital_IOSignal terminal (PCINT16/OC0B/T1)PD5 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (PCINT16/OC0B/T1)PD5. Supported peripheral buses: PWM.
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11(ICPI/PCINT17)PD6Digital_IOSignal terminal (ICPI/PCINT17)PD6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (ICPI/PCINT17)PD6. Supported peripheral buses: General.
12(AIN0/PCINT0)PB0AnalogSignal terminal (AIN0/PCINT0)PB0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (AIN0/PCINT0)PB0. Supported peripheral buses: ADC.
13(AIN1/PCINT1)PB1AnalogSignal terminal (AIN1/PCINT1)PB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (AIN1/PCINT1)PB1. Supported peripheral buses: ADC.
14(OC0A/PCINT2)PB2Digital_IOSignal terminal (OC0A/PCINT2)PB2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC0A/PCINT2)PB2. Supported peripheral buses: PWM.
15(OC1A/PCINT3)PB3Digital_IOSignal terminal (OC1A/PCINT3)PB3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC1A/PCINT3)PB3. Supported peripheral buses: PWM.
16(OC1B/PCINT4)PB4Digital_IOSignal terminal (OC1B/PCINT4)PB4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC1B/PCINT4)PB4. Supported peripheral buses: PWM.
17IO8Digital_IOGPIO8 / RTC_GPIO8 / TOUCH8 / ADC1_CH7 / SUBSPICS1
18(MISO/DO/PCINT6)PB6Digital_IOSignal terminal (MISO/DO/PCINT6)PB6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (MISO/DO/PCINT6)PB6. Supported peripheral buses: SPI.
19IO20Digital_IOGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).