ATA6625-GBQW (VDFN-8(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATA6625-GBQW

MICROCHIPVDFN-8(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATA6625-GBQW (VDFN-8(3x3))1VS2EN3GND4LIN5RXD9EP8VCC7NRES6TXDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=3.00mm · Pitch e=0.65mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VSI/OMultiplexed I/O & Peripheral Pin VS (General)
2ENISystem Enable & Hardware Reset (EN)
3GNDGNDGround Reference Pin (GND)
4LINI/OMultiplexed I/O & Peripheral Pin LIN (General)
5RXDI/OMultiplexed I/O & Peripheral Pin RXD (UART)
6TXDI/OMultiplexed I/O & Peripheral Pin TXD (UART)
7NRESI/OMultiplexed I/O & Peripheral Pin NRES (General)
8VCCPowerRegulated Power Output (VCC — 5V to 28V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VS
I/O
Multiplexed I/O & Peripheral Pin VS (General)
Design note: Battery supply
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATA6625-GBQW (VDFN-8(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATA6625-GBQW (VDFN-8(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATA6625-GBQW (VDFN-8(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATA6625-GBQW (VDFN-8(3x3)) - 4. Package Dimensions (D×E×A)
VDFN-8(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATA6625-GBQW (VDFN-8(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATA6625-GBQW (VDFN-8(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for ATA6625
P2 · p02_fig011495×1079px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 1-1. Block Diagram
Figure 1-1. Block Diagram
P3 · p03_fig011411×390px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 2-1. Pinning
Figure 2-1. Pinning
P19 · p19_fig011622×1166px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 10-1. Definition of Bus Timing Characteristics
Figure 10-1. Definition of Bus Timing Characteristics
P19 · p19_fig021854×1205px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 10-2. Application Circuit
Figure 10-2. Application Circuit
P19 · p19_fig02P19
ATA6625-GBQW (VDFN-8(3x3)) — Datasheet Page 19 (p19_fig02)
Datasheet Page 19 (p19_fig02)
P20 · p20_fig011922×2276px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 11-1. Package SO8
Figure 11-1. Package SO8
P20 · p20_fig01P20
ATA6625-GBQW (VDFN-8(3x3)) — Datasheet Page 20 (p20_fig01)
Datasheet Page 20 (p20_fig01)
P21 · p21_fig011907×2171px
ATA6625-GBQW (VDFN-8(3x3)) — Figure 11-2. Package DFN8
Figure 11-2. Package DFN8
P21 · p21_fig01P21
ATA6625-GBQW (VDFN-8(3x3)) — Datasheet Page 21 (p21_fig01)
Datasheet Page 21 (p21_fig01)

Technical Specifications & Part Details (ATA6625-GBQW)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATA6625-GBQW (VDFN-8(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.80 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 5V to 28V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART interfaces.
Operating Supply VoltageV_CC / V_DD
5V to 28V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
85mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (VDFN-8(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (VDFN-8(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.84 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
VDFN-8(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATA6625-GBQW (VDFN-8(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATA6625-GBQW (VDFN-8(3x3))?

Manufactured by MICROCHIP, the ATA6625-GBQW is housed in a VDFN-8(3x3) package with 9 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 5V to 28V. Key pins include: 1 (VS: Multiplexed I/O & Peripheral Pin VS (General)), 2 (EN: System Enable & Hardware Reset (EN)), 3 (GND: Ground Reference Pin (GND)), 4 (LIN: Multiplexed I/O & Peripheral Pin LIN (General)), 5 (RXD: Multiplexed I/O & Peripheral Pin RXD (UART)), 6 (TXD: Multiplexed I/O & Peripheral Pin TXD (UART)).

What are the IPC-7351B PCB Footprint dimensions for ATA6625-GBQW?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATA6625-GBQW (VDFN-8(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATA6625-GBQW?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATA6625-GBQW (MICROCHIP, VDFN-8(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & ATA6625 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VSDigital_IOSignal terminal VS (I/O, 5V to 28V domain). Multiplexed alternate functions: VS. Supported peripheral buses: General.
2ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4LINDigital_IOSignal terminal LIN (I/O, 5V to 28V domain). Multiplexed alternate functions: LIN. Supported peripheral buses: General.
5RXDDigital_IOSignal terminal RXD (I/O, 5V to 28V domain). Multiplexed alternate functions: RXD. Supported peripheral buses: UART.
6TXDDigital_IOSignal terminal TXD (I/O, 5V to 28V domain). Multiplexed alternate functions: TXD. Supported peripheral buses: UART.
7NRESDigital_IOSignal terminal NRES (I/O, 5V to 28V domain). Multiplexed alternate functions: NRES. Supported peripheral buses: General.
8VCCPower_OutRegulated power output rail (VCC) operating in the 5V to 28V domain (Max rating: 28.0V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.