AT21CS11-MSH10-T (XSFN-2(3.5x5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT21CS11-MSH10-T

MICROCHIPXSFN-2(3.5x5) · 2 Pins · Pitch 2.00mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT21CS11-MSH10-T (XSFN-2(3.5x5))1SI/O2GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
21E=5.00mm · Pitch e=2.00mmD=3.50mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 5.00mm × 3.50mm · Pitch: 2.00mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (2/2)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SI/OI/OMultiplexed I/O & Peripheral Pin SI/O (General)
2GNDGNDGround Reference Pin (GND)
PIN 1 SI/O
I/O
Multiplexed I/O & Peripheral Pin SI/O (General)
Design note: Serial Input and Output
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 2. Standard Pinout (Top View)
True package pinout (2 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 4. Package Dimensions (D×E×A)
XSFN-2(3.5x5) · 5.00×3.50mm · Pitch 2.00mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (2 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT21CS11-MSH10-T (XSFN-2(3.5x5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for AT21CS11
P1 · p01_fig01456×280px
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — Single-Wire, I/O Powered 1-Kbit (128 x 8) Serial EEPROM with a Unique, Factory-Programmed 64-Bit Serial Number
Single-Wire, I/O Powered 1-Kbit (128 x 8) Serial EEPROM with a Unique, Factory-Programmed 64-Bit Serial Number
P38 · p38_fig011767×2167px
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P38 · p38_fig01P38
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — Datasheet Page 38 (p38_fig01)
Datasheet Page 38 (p38_fig01)
P41 · p41_fig011771×2231px
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P2 · p02_fig01All Packages in PDF
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — NC 1 | NC | NC | GND | 3 | 2 | 1 | GND | SI/O | NC | 3-lead SOT23 | (Top View) | SI/O | GND | 1 | 2 | 2-pad XSFN | (Top View)
NC 1 | NC | NC | GND | 3 | 2 | 1 | GND | SI/O | NC | 3-lead SOT23 | (Top View) | SI/O | GND | 1 | 2 | 2-pad XSFN | (Top View)
P2 · p02_fig02All Packages in PDF
AT21CS11-MSH10-T (XSFN-2(3.5x5)) — 8-lead SOIC | (Top View) | NC 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | NC | NC | GND | NC | NC | NC | SI/O | SI/O | GND | 4-ball WLCSP | (Top View) | NC | NC | A1 A2 | B1 B2 | SI/O | NC
8-lead SOIC | (Top View) | NC 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | NC | NC | GND | NC | NC | NC | SI/O | SI/O | GND | 4-ball WLCSP | (Top View) | NC | NC | A1 A2 | B1 B2 | SI/O | NC

Technical Specifications & Part Details (AT21CS11-MSH10-T)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT21CS11-MSH10-T (XSFN-2(3.5x5)) is a 2-pin standard electronic & interconnect component featuring a 3.50 × 5.00 × 1.00 mm mechanical envelope (lead pitch e = 2.00 mm). Rated for 1.7V to 3.6V supply operation across -55°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.7V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.50 × 5.00 × 1.00 mm (A1=0.04 mm)
Package family: OTHER (XSFN-2(3.5x5))
Pin Count & Lead PitchN / e
2 Pins | Pitch e = 2.00 mm (78.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol2 auto-grouped pins
OK
IPC-7351B Land Pattern2 pads · Pitch 2.00mm
OK
IPC-7525 60% Solder PasteEPAD 5.00×4.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (XSFN-2(3.5x5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.50 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=2.00mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
2P / 2Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
XSFN-2(3.5x5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT21CS11-MSH10-T (XSFN-2(3.5x5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT21CS11-MSH10-T (XSFN-2(3.5x5))?

Manufactured by MICROCHIP, the AT21CS11-MSH10-T is housed in a XSFN-2(3.5x5) package with 2 pins and a 2.00 mm lead pitch, supporting a VCC supply range of 1.7V to 3.6V. Key pins include: 1 (SI/O: Multiplexed I/O & Peripheral Pin SI/O (General)), 2 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for AT21CS11-MSH10-T?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT21CS11-MSH10-T (XSFN-2(3.5x5)) has a nominal body envelope of 5.00 × 3.50 mm, pitch e = 2.00 mm, and 2 copper pads plus a central exposed thermal pad (EPAD) of 5.00 × 4.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT21CS11-MSH10-T?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT21CS11-MSH10-T (MICROCHIP, XSFN-2(3.5x5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (2 pins) & AT21CS11 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SI/ODigital_IOSignal terminal SI/O (I/O, 1.7V to 3.6V domain). Multiplexed alternate functions: SI/O. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.