24LC02BHT-I/LT (SC-70-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

24LC02BHT-I/LT

MICROCHIPSC-70-5 · 5 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 24LC02BHT-I/LT (SC-70-5)1SCL2VSS3SDA5WP4VCCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345E=2.00mm · Pitch e=0.65mmD=1.25mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 1.25mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (5/5)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
2VSSGNDGround Reference Pin (VSS)
3SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
4VCCPowerPower Supply Input (VCC — 1.7V to 5.5V)
5WPI/OMultiplexed I/O & Peripheral Pin WP (General)
PIN 1 SCL
I/O
Multiplexed I/O & Peripheral Pin SCL (I2C)
Design note: Serial Clock
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
24LC02BHT-I/LT (SC-70-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
24LC02BHT-I/LT (SC-70-5) - 2. Standard Pinout (Top View)
True package pinout (5 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
24LC02BHT-I/LT (SC-70-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
24LC02BHT-I/LT (SC-70-5) - 4. Package Dimensions (D×E×A)
SC-70-5 · 2.00×1.25mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
24LC02BHT-I/LT (SC-70-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (5 Pads)Expand ›
6. Application SchematicSCHEMATIC
24LC02BHT-I/LT (SC-70-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for 24LC02BHT
P1 · p01_fig011230×482px
24LC02BHT-I/LT (SC-70-5) — 2K I2C™ Serial EEPROM with Half-Array Write-Protect
2K I2C™ Serial EEPROM with Half-Array Write-Protect
P1 · p01_fig02867×1009px
24LC02BHT-I/LT (SC-70-5) — I/O Control Logic
I/O Control Logic
P1 · p01_fig031777×916px
24LC02BHT-I/LT (SC-70-5) — Note: Pins A0, A1 and A2 are not used by the 24XX02H (no internal connections).
Note: Pins A0, A1 and A2 are not used by the 24XX02H (no internal connections).
P1 · p01_fig01P1
24LC02BHT-I/LT (SC-70-5) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P12 · p12_fig01All Packages in PDF
24LC02BHT-I/LT (SC-70-5) — 24AA02H/24LC02BH
24AA02H/24LC02BH

Technical Specifications & Part Details (24LC02BHT-I/LT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:24LC02BHT-I/LT (SC-70-5) is a 5-pin standard electronic & interconnect component featuring a 2.00 × 1.25 × 0.95 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.7V to 5.5V supply operation across -40°C to +85°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 1.25 × 0.95 mm (A1=0.06 mm)
Package family: SOT23 (SC-70-5)
Pin Count & Lead PitchN / e
5 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol5 auto-grouped pins
OK
IPC-7351B Land Pattern5 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 24LC02BHT (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SC-70-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 1.25 mm
Height (A) & Pitch (e)IPC-7351B
A=0.95mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 0.85 mm
Pins / Total PadsTopology
5P / 5Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SC-70-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 24LC02BHT-I/LT (SC-70-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 24LC02BHT-I/LT (SC-70-5)?

Manufactured by MICROCHIP, the 24LC02BHT-I/LT is housed in a SC-70-5 package with 5 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.7V to 5.5V. Key pins include: 1 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)), 2 (VSS: Ground Reference Pin (VSS)), 3 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 4 (VCC: Power Supply Input (VCC — 1.7V to 5.5V)), 5 (WP: Multiplexed I/O & Peripheral Pin WP (General)).

What are the IPC-7351B PCB Footprint dimensions for 24LC02BHT-I/LT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 24LC02BHT-I/LT (SC-70-5) has a nominal body envelope of 1.25 × 2.00 mm, pitch e = 0.65 mm, and 5 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 24LC02BHT-I/LT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 24LC02BHT-I/LT (MICROCHIP, SC-70-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (5 pins) & 24LC02BHT Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SCLDigital_IOSignal terminal SCL (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
2VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
3SDADigital_IOSignal terminal SDA (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
4VCCPower_InPrimary positive power supply input (VCC) operating in the 1.7V to 5.5V domain (Max rating: 5.5V).
5WPDigital_IOSignal terminal WP (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.