24FC256T-I/SM (SOIJ-8-5.28mm) — Symbol, Footprint IPC-7351B & 3D STEP Model

24FC256T-I/SM

MICROCHIPSOIJ-8-5.28mm · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 24FC256T-I/SM (SOIJ-8-5.28mm)1A02A13A24VSS8VCC7WP6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=5.30mm · Pitch e=1.27mmD=5.30mm-5-4-3-2-10123456543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 5.30mm × 5.30mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1A0I/OMultiplexed I/O & Peripheral Pin A0 (General)
2A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
3A2I/OMultiplexed I/O & Peripheral Pin A2 (General)
4VSSGNDGround Reference Pin (VSS)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7WPI/OMultiplexed I/O & Peripheral Pin WP (General)
8VCCPowerPower Supply Input (VCC — 1.7V to 5.5V)
PIN 1 A0
I/O
Multiplexed I/O & Peripheral Pin A0 (General)
Design note: User Configurable Chip Select
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
24FC256T-I/SM (SOIJ-8-5.28mm) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
24FC256T-I/SM (SOIJ-8-5.28mm) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
24FC256T-I/SM (SOIJ-8-5.28mm) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
24FC256T-I/SM (SOIJ-8-5.28mm) - 4. Package Dimensions (D×E×A)
SOIJ-8-5.28mm · 5.30×5.30mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
24FC256T-I/SM (SOIJ-8-5.28mm) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
24FC256T-I/SM (SOIJ-8-5.28mm) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for 24FC256T
P1 · p01_fig011777×536px
24FC256T-I/SM (SOIJ-8-5.28mm) — 24AA256 1.7V-5.5V 400 kHz(1) I, E MF, MS, P, SN, SM, MNY, ST, CS
24AA256 1.7V-5.5V 400 kHz(1) I, E MF, MS, P, SN, SM, MNY, ST, CS
P1 · p01_fig02376×200px
24FC256T-I/SM (SOIJ-8-5.28mm) — 256K I2C Serial EEPROM
256K I2C Serial EEPROM
P1 · p01_fig031699×433px
24FC256T-I/SM (SOIJ-8-5.28mm) — • Automotive AEC-Q100 Qualified
• Automotive AEC-Q100 Qualified
P1 · p01_fig01P1
24FC256T-I/SM (SOIJ-8-5.28mm) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011120×991px
24FC256T-I/SM (SOIJ-8-5.28mm) — 24AA256/24LC256/24FC256 | Block Diagram | HV Generator | EEPROM Array | Page Latches | YDEC | XDEC | Sense Amp. R/W Control | Memory Control Logic | I/O Control Logic | I/O | A0 A1A2 | SDA | SCL | VCC | VSS | WP
24AA256/24LC256/24FC256 | Block Diagram | HV Generator | EEPROM Array | Page Latches | YDEC | XDEC | Sense Amp. R/W Control | Memory Control Logic | I/O Control Logic | I/O | A0 A1A2 | SDA | SCL | VCC | VSS | WP
P15 · p15_fig011777×2335px
24FC256T-I/SM (SOIJ-8-5.28mm) — 9.1 Package Marking Information
9.1 Package Marking Information
P25 · p25_fig011777×2509px
24FC256T-I/SM (SOIJ-8-5.28mm) — 24AA256/24LC256/24FC256
24AA256/24LC256/24FC256
P25 · p25_fig01P25
24FC256T-I/SM (SOIJ-8-5.28mm) — Datasheet Page 25 (p25_fig01)
Datasheet Page 25 (p25_fig01)
P26 · p26_fig011777×2509px
24FC256T-I/SM (SOIJ-8-5.28mm) — 24AA256/24LC256/24FC256
24AA256/24LC256/24FC256
P26 · p26_fig01P26
24FC256T-I/SM (SOIJ-8-5.28mm) — Datasheet Page 26 (p26_fig01)
Datasheet Page 26 (p26_fig01)

Technical Specifications & Part Details (24FC256T-I/SM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:24FC256T-I/SM (SOIJ-8-5.28mm) is a 8-pin standard electronic & interconnect component featuring a 5.30 × 5.30 × 1.00 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.7V to 5.5V supply operation across -65°C to +150°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.30 × 5.30 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (SOIJ-8-5.28mm)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIJ-8-5.28mm)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.30 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=1.27mm
Pad Size (W × L)Level B
0.61 × 1.91 mm
Pins / Total PadsTopology
8P / 8Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIJ-8-5.28mm
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 24FC256T-I/SM (SOIJ-8-5.28mm)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 24FC256T-I/SM (SOIJ-8-5.28mm)?

Manufactured by MICROCHIP, the 24FC256T-I/SM is housed in a SOIJ-8-5.28mm package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1.7V to 5.5V. Key pins include: 1 (A0: Multiplexed I/O & Peripheral Pin A0 (General)), 2 (A1: Multiplexed I/O & Peripheral Pin A1 (General)), 3 (A2: Multiplexed I/O & Peripheral Pin A2 (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for 24FC256T-I/SM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 24FC256T-I/SM (SOIJ-8-5.28mm) has a nominal body envelope of 5.30 × 5.30 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 24FC256T-I/SM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 24FC256T-I/SM (MICROCHIP, SOIJ-8-5.28mm) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 24FC256T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1A0Digital_IOSignal terminal A0 (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
2A1Digital_IOSignal terminal A1 (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
3A2Digital_IOSignal terminal A2 (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: A2. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7WPDigital_IOSignal terminal WP (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 1.7V to 5.5V domain (Max rating: 5.5V).