SY89871UMG (QFN-16) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY89871UMG

MICROCHIPQFN-16 · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY89871UMG (QFN-16)1QB0, /QB0 QB2QB0, /QB0 QB3QB0, /QB0 QB4QB0, /QB0 QB5QA, /QA6QA, /QA7VCC8/RESET9IN, /IN17EP16S1, S015S1, S014VCC13GND12IN, /IN11VT10VREF-ACGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1QB0, /QB0 QB1, /QB1I/OMultiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)
2QB0, /QB0 QB1, /QB1I/OMultiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)
3QB0, /QB0 QB1, /QB1I/OMultiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)
4QB0, /QB0 QB1, /QB1I/OMultiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)
5QA, /QAI/OMultiplexed I/O & Peripheral Pin QA, /QA (General)
6QA, /QAI/OMultiplexed I/O & Peripheral Pin QA, /QA (General)
7VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
8/RESETISystem Enable & Hardware Reset (/RESET)
9IN, /INI/OMultiplexed I/O & Peripheral Pin IN, /IN (General)
10VREF-ACAnalogMultiplexed I/O & Peripheral Pin VREF-AC (General)
11VTI/OMultiplexed I/O & Peripheral Pin VT (General)
12IN, /INI/OMultiplexed I/O & Peripheral Pin IN, /IN (General)
13GNDGNDGround Reference Pin (GND)
14VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
15S1, S0I/OMultiplexed I/O & Peripheral Pin S1, S0 (General)
16S1, S0I/OMultiplexed I/O & Peripheral Pin S1, S0 (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 QB0, /QB0 QB1, /QB1
I/O
Multiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)
Design note: Differential Buffered Output Clocks: The differential output is a divided-down version of the input frequency and has a matched output delay with Bank A. Divided by 2, 4, 8, or 16. See “Truth Table.” Unused output pairs may be left floating
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY89871UMG (QFN-16) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY89871UMG (QFN-16) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY89871UMG (QFN-16) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY89871UMG (QFN-16) - 4. Package Dimensions (D×E×A)
QFN-16 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY89871UMG (QFN-16) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY89871UMG (QFN-16) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for SY89871
P12 · p12_fig02EXACT PACKAGE
SY89871UMG (QFN-16) — 16-Pin Package Type (QFN)
16-Pin Package Type (QFN)
P1 · p01_fig01650×628px
SY89871UMG (QFN-16) — United States Patent No. RE44,134
United States Patent No. RE44,134
P2 · p02_fig01955×789px
SY89871UMG (QFN-16) — Functional Block Diagram
Functional Block Diagram
P3 · p03_fig01676×646px
SY89871UMG (QFN-16) — Micrel, Inc. SY89871U
Micrel, Inc. SY89871U
P12 · p12_fig01997×894px
SY89871UMG (QFN-16) — Micrel, Inc. SY89871U
Micrel, Inc. SY89871U
P12 · p12_fig032038×676px
SY89871UMG (QFN-16) — Oct. 1, 2013 12 M9999-010512-F hbwhelp@micrel.com or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | Micrel makes no representations or warran
Oct. 1, 2013 12 M9999-010512-F [email protected] or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | Micrel makes no representations or warran

Technical Specifications & Part Details (SY89871UMG)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY89871UMG (QFN-16) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2.5GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-16)
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.70×1.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-16)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY89871UMG (QFN-16)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY89871UMG (QFN-16)?

Manufactured by MICROCHIP, the SY89871UMG is housed in a QFN-16 package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (QB0, /QB0 QB1, /QB1: Multiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)), 2 (QB0, /QB0 QB1, /QB1: Multiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)), 3 (QB0, /QB0 QB1, /QB1: Multiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)), 4 (QB0, /QB0 QB1, /QB1: Multiplexed I/O & Peripheral Pin QB0, /QB0 QB1, /QB1 (General)), 5 (QA, /QA: Multiplexed I/O & Peripheral Pin QA, /QA (General)), 6 (QA, /QA: Multiplexed I/O & Peripheral Pin QA, /QA (General)).

What are the IPC-7351B PCB Footprint dimensions for SY89871UMG?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY89871UMG (QFN-16) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.70 × 1.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY89871UMG?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY89871UMG (MICROCHIP, QFN-16) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & SY89871 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1QB0, /QB0 QB1, /QB1Digital_IOSignal terminal QB0, /QB0 QB1, /QB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QB0, /QB0 QB1, /QB1. Supported peripheral buses: General.
2QB0, /QB0 QB1, /QB1Digital_IOSignal terminal QB0, /QB0 QB1, /QB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QB0, /QB0 QB1, /QB1. Supported peripheral buses: General.
3QB0, /QB0 QB1, /QB1Digital_IOSignal terminal QB0, /QB0 QB1, /QB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QB0, /QB0 QB1, /QB1. Supported peripheral buses: General.
4QB0, /QB0 QB1, /QB1Digital_IOSignal terminal QB0, /QB0 QB1, /QB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QB0, /QB0 QB1, /QB1. Supported peripheral buses: General.
5QA, /QADigital_IOSignal terminal QA, /QA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QA, /QA. Supported peripheral buses: General.
6QA, /QADigital_IOSignal terminal QA, /QA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: QA, /QA. Supported peripheral buses: General.
7VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8/RESETDigital_IOActive-low hardware reset terminal (/RESET): pulling this pin Low resets the processor core and peripherals.
9IN, /INDigital_IOSignal terminal IN, /IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN, /IN. Supported peripheral buses: General.
10VREF-ACAnalogSignal terminal VREF-AC (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC. Supported peripheral buses: General.
11VTDigital_IOSignal terminal VT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT. Supported peripheral buses: General.
12IN, /INDigital_IOSignal terminal IN, /IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN, /IN. Supported peripheral buses: General.
13GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
14VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
15S1, S0Digital_IOSignal terminal S1, S0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: S1, S0. Supported peripheral buses: General.
16S1, S0Digital_IOSignal terminal S1, S0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: S1, S0. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.