SY89840UMG-TR (VQFN-16-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY89840UMG-TR

MICROCHIPVQFN-16-EP(3x3) · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY89840UMG-TR (VQFN-16-EP(3x3))1IN0, /IN0, I2VREF-AC0 VRE3VT0, VT14IN0, /IN0, I5VCC6Q, /Q7Q, /Q8VCC9GND Exposed 17EP16IN0, /IN0, I15VT0, VT114VREF-AC0 VRE13IN0, /IN0, I12VCC11CAP10SELGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IN0, /IN0, IN1, /IN1I/OMultiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)
2VREF-AC0 VREF-AC1AnalogMultiplexed I/O & Peripheral Pin VREF-AC0 VREF-AC1 (General)
3VT0, VT1I/OMultiplexed I/O & Peripheral Pin VT0, VT1 (General)
4IN0, /IN0, IN1, /IN1I/OMultiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)
5VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
6Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
7Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
9GND Exposed PadGNDGround Reference Pin (GND Exposed Pad)
10SELI/OMultiplexed I/O & Peripheral Pin SEL (General)
11CAPI/OMultiplexed I/O & Peripheral Pin CAP (General)
12VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
13IN0, /IN0, IN1, /IN1I/OMultiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)
14VREF-AC0 VREF-AC1AnalogMultiplexed I/O & Peripheral Pin VREF-AC0 VREF-AC1 (General)
15VT0, VT1I/OMultiplexed I/O & Peripheral Pin VT0, VT1 (General)
16IN0, /IN0, IN1, /IN1I/OMultiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IN0, /IN0, IN1, /IN1
I/O
Multiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)
Design note: Differential Inputs: These input pairs are the differential signal inputs to the device. These inputs accept AC or DC-coupled signals as small as 100mV (200mV ). Each pin of a pair internally terminates to a VTpin through 50Ω. pp Please ref
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY89840UMG-TR (VQFN-16-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY89840UMG-TR (VQFN-16-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY89840UMG-TR (VQFN-16-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY89840UMG-TR (VQFN-16-EP(3x3)) - 4. Package Dimensions (D×E×A)
VQFN-16-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY89840UMG-TR (VQFN-16-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY89840UMG-TR (VQFN-16-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for SY89840
P3 · p03_fig01EXACT PACKAGE
SY89840UMG-TR (VQFN-16-EP(3x3)) — 16-Pin QFN (QFN-16)
16-Pin QFN (QFN-16)
P15 · p15_fig01EXACT PACKAGE
SY89840UMG-TR (VQFN-16-EP(3x3)) — QFN-16 Package (3mmx3mm)
QFN-16 Package (3mmx3mm)
P1 · p01_fig01719×146px
SY89840UMG-TR (VQFN-16-EP(3x3)) — General Description
General Description
P2 · p02_fig01849×603px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Typical Application
Typical Application
P2 · p02_fig02962×453px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Simplified Example Illustrating RPE (Runt Pulse Elimination)
Simplified Example Illustrating RPE (Runt Pulse Elimination)
P2 · p02_fig01P2
SY89840UMG-TR (VQFN-16-EP(3x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P13 · p13_fig01440×524px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 3c. CML Interface (DC-Coupled)
Figure 3c. CML Interface (DC-Coupled)
P13 · p13_fig02510×511px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 3c. CML Interface (DC-Coupled)
Figure 3c. CML Interface (DC-Coupled)
P13 · p13_fig03365×414px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 3c. CML Interface (DC-Coupled)
Figure 3c. CML Interface (DC-Coupled)
P13 · p13_fig04365×445px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 3e. LVDS Interface
Figure 3e. LVDS Interface
P13 · p13_fig05364×414px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 3e. LVDS Interface
Figure 3e. LVDS Interface
P14 · p14_fig011074×606px
SY89840UMG-TR (VQFN-16-EP(3x3)) — Figure 4a. Parallel Termination-Thevenin Equipment
Figure 4a. Parallel Termination-Thevenin Equipment
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (SY89840UMG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY89840UMG-TR (VQFN-16-EP(3x3)) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.00 mm (A1=0.03 mm)
Package family: QFN (VQFN-16-EP(3x3))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.60×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (VQFN-16-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
VQFN-16-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY89840UMG-TR (VQFN-16-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY89840UMG-TR (VQFN-16-EP(3x3))?

Manufactured by MICROCHIP, the SY89840UMG-TR is housed in a VQFN-16-EP(3x3) package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (IN0, /IN0, IN1, /IN1: Multiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)), 2 (VREF-AC0 VREF-AC1: Multiplexed I/O & Peripheral Pin VREF-AC0 VREF-AC1 (General)), 3 (VT0, VT1: Multiplexed I/O & Peripheral Pin VT0, VT1 (General)), 4 (IN0, /IN0, IN1, /IN1: Multiplexed I/O & Peripheral Pin IN0, /IN0, IN1, /IN1 (General)), 5 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 6 (Q, /Q: Multiplexed I/O & Peripheral Pin Q, /Q (General)).

What are the IPC-7351B PCB Footprint dimensions for SY89840UMG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY89840UMG-TR (VQFN-16-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.60 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY89840UMG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY89840UMG-TR (MICROCHIP, VQFN-16-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & SY89840 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IN0, /IN0, IN1, /IN1Digital_IOSignal terminal IN0, /IN0, IN1, /IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN0, /IN0, IN1, /IN1. Supported peripheral buses: General.
2VREF-AC0 VREF-AC1AnalogSignal terminal VREF-AC0 VREF-AC1 (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC0 VREF-AC1. Supported peripheral buses: General.
3VT0, VT1Digital_IOSignal terminal VT0, VT1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT0, VT1. Supported peripheral buses: General.
4IN0, /IN0, IN1, /IN1Digital_IOSignal terminal IN0, /IN0, IN1, /IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN0, /IN0, IN1, /IN1. Supported peripheral buses: General.
5VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
6Q, /QDigital_IOSignal terminal Q, /Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
7Q, /QDigital_IOSignal terminal Q, /Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9GND Exposed PadGND0V electrical ground return terminal (GND Exposed Pad) for internal core logic, I/O drivers, and analog sub-blocks.
10SELDigital_IOSignal terminal SEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SEL. Supported peripheral buses: General.
11CAPDigital_IOSignal terminal CAP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CAP. Supported peripheral buses: General.
12VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
13IN0, /IN0, IN1, /IN1Digital_IOSignal terminal IN0, /IN0, IN1, /IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN0, /IN0, IN1, /IN1. Supported peripheral buses: General.
14VREF-AC0 VREF-AC1AnalogSignal terminal VREF-AC0 VREF-AC1 (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC0 VREF-AC1. Supported peripheral buses: General.
15VT0, VT1Digital_IOSignal terminal VT0, VT1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT0, VT1. Supported peripheral buses: General.
16IN0, /IN0, IN1, /IN1Digital_IOSignal terminal IN0, /IN0, IN1, /IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN0, /IN0, IN1, /IN1. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.