SY88024LMG (TQFN-16-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY88024LMG

MICROCHIPTQFN-16-EP(3x3) · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY88024LMG (TQFN-16-EP(3x3))1VCC2DIN+3DIN–4VCC5MODSET6/EN7EQSET8GND9VCC17EP16BIASSET15BIASMON14GND13BIAS12VCC11MOD+10MOD–Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
2DIN+I/OMultiplexed I/O & Peripheral Pin DIN+ (General)
3DIN–I/OMultiplexed I/O & Peripheral Pin DIN– (General)
4VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
5MODSETI/OMultiplexed I/O & Peripheral Pin MODSET (General)
6/ENI/OMultiplexed I/O & Peripheral Pin /EN (General)
7EQSETI/OMultiplexed I/O & Peripheral Pin EQSET (General)
8GNDGNDGround Reference Pin (GND)
9VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
10MOD–I/OMultiplexed I/O & Peripheral Pin MOD– (General)
11MOD+I/OMultiplexed I/O & Peripheral Pin MOD+ (General)
12VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
13BIASI/OMultiplexed I/O & Peripheral Pin BIAS (General)
14GNDGNDGround Reference Pin (GND)
15BIASMONI/OMultiplexed I/O & Peripheral Pin BIASMON (General)
16BIASSETI/OMultiplexed I/O & Peripheral Pin BIASSET (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VCC
Power
Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)
Design note: Supply Voltage. Bypass with a 0.1µF//0.01µF low ESR capacitor as close to the VCC pins as possible.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY88024LMG (TQFN-16-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY88024LMG (TQFN-16-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY88024LMG (TQFN-16-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY88024LMG (TQFN-16-EP(3x3)) - 4. Package Dimensions (D×E×A)
TQFN-16-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY88024LMG (TQFN-16-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY88024LMG (TQFN-16-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for SY88024
P1 · p01_fig011603×844px
SY88024LMG (TQFN-16-EP(3x3)) — PDF Figure p01_fig01 (Page 1 — OTHER_DIAGRAM)
PDF Figure p01_fig01 (Page 1 — OTHER_DIAGRAM)
P2 · p02_fig01568×684px
SY88024LMG (TQFN-16-EP(3x3)) — 16-Pin QFN
16-Pin QFN
P9 · p09_fig011599×1743px
SY88024LMG (TQFN-16-EP(3x3)) — Figure 3. Typical Optical Transceiver
Figure 3. Typical Optical Transceiver
P10 · p10_fig011937×1037px
SY88024LMG (TQFN-16-EP(3x3)) — Package Information
Package Information
P10 · p10_fig022041×652px
SY88024LMG (TQFN-16-EP(3x3)) — October 2009 10 M9999-102809-A hbwhelp@micrel.com or (408) 955-1690 | 16-Pin (3mm x 3mm) QFN | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | indemnify Micrel
October 2009 10 M9999-102809-A [email protected] or (408) 955-1690 | 16-Pin (3mm x 3mm) QFN | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | indemnify Micrel

Technical Specifications & Part Details (SY88024LMG)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY88024LMG (TQFN-16-EP(3x3)) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 65°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (TQFN-16-EP(3x3))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.60×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TQFN-16-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFN-16-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY88024LMG (TQFN-16-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY88024LMG (TQFN-16-EP(3x3))?

Manufactured by MICROCHIP, the SY88024LMG is housed in a TQFN-16-EP(3x3) package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 2 (DIN+: Multiplexed I/O & Peripheral Pin DIN+ (General)), 3 (DIN–: Multiplexed I/O & Peripheral Pin DIN– (General)), 4 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 5 (MODSET: Multiplexed I/O & Peripheral Pin MODSET (General)), 6 (/EN: Multiplexed I/O & Peripheral Pin /EN (General)).

What are the IPC-7351B PCB Footprint dimensions for SY88024LMG?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY88024LMG (TQFN-16-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.60 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY88024LMG?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY88024LMG (MICROCHIP, TQFN-16-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & SY88024 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
2DIN+Digital_IOSignal terminal DIN+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DIN+. Supported peripheral buses: General.
3DIN–Digital_IOSignal terminal DIN– (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DIN–. Supported peripheral buses: General.
4VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
5MODSETDigital_IOSignal terminal MODSET (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MODSET. Supported peripheral buses: General.
6/ENDigital_IOSignal terminal /EN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /EN. Supported peripheral buses: General.
7EQSETDigital_IOSignal terminal EQSET (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: EQSET. Supported peripheral buses: General.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
10MOD–Digital_IOSignal terminal MOD– (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MOD–. Supported peripheral buses: General.
11MOD+Digital_IOSignal terminal MOD+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MOD+. Supported peripheral buses: General.
12VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
13BIASDigital_IOSignal terminal BIAS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BIAS. Supported peripheral buses: General.
14GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
15BIASMONDigital_IOSignal terminal BIASMON (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BIASMON. Supported peripheral buses: General.
16BIASSETDigital_IOSignal terminal BIASSET (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BIASSET. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.