SY100S891JC (PLCC-28(11.5x11.5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY100S891JC

MICROCHIPPLCC-28(11.5x11.5) · 28 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY100S891JC (PLCC-28(11.5x11.5))1VEE2D23BUSEN24D15BUSEN16D07BUSEN08Q09BUS010VCCA11BUS112Q113VCCA14BUS228CLK127CLK226MR25D324BUSEN323D422BUSEN421Q420BUS419VCCA18Q317BUS316VCC15Q2Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
28272625242322212019181716151413121110987654321E=11.50mm · Pitch e=1.27mmD=11.50mm-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 11.50mm × 11.50mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VEEI/OMultiplexed I/O & Peripheral Pin VEE (General)
2D2I/OMultiplexed I/O & Peripheral Pin D2 (General)
3BUSEN2I/OMultiplexed I/O & Peripheral Pin BUSEN2 (General)
4D1I/OMultiplexed I/O & Peripheral Pin D1 (General)
5BUSEN1I/OMultiplexed I/O & Peripheral Pin BUSEN1 (General)
6D0I/OMultiplexed I/O & Peripheral Pin D0 (General)
7BUSEN0I/OMultiplexed I/O & Peripheral Pin BUSEN0 (General)
8Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
9BUS0I/OMultiplexed I/O & Peripheral Pin BUS0 (General)
10VCCAPowerPower Supply Input (VCCA — 3.3V / 5.0V Standard Logic)
11BUS1I/OMultiplexed I/O & Peripheral Pin BUS1 (General)
12Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
13VCCAPowerPower Supply Input (VCCA — 3.3V / 5.0V Standard Logic)
14BUS2I/OMultiplexed I/O & Peripheral Pin BUS2 (General)
15Q2I/OMultiplexed I/O & Peripheral Pin Q2 (General)
16VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
17BUS3I/OMultiplexed I/O & Peripheral Pin BUS3 (General)
18Q3I/OMultiplexed I/O & Peripheral Pin Q3 (General)
19VCCAPowerPower Supply Input (VCCA — 3.3V / 5.0V Standard Logic)
20BUS4I/OMultiplexed I/O & Peripheral Pin BUS4 (General)
21Q4I/OMultiplexed I/O & Peripheral Pin Q4 (General)
22BUSEN4I/OMultiplexed I/O & Peripheral Pin BUSEN4 (General)
23D4I/OMultiplexed I/O & Peripheral Pin D4 (General)
24BUSEN3I/OMultiplexed I/O & Peripheral Pin BUSEN3 (General)
25D3I/OMultiplexed I/O & Peripheral Pin D3 (General)
26MRI/OMultiplexed I/O & Peripheral Pin MR (General)
27CLK2I/OMultiplexed I/O & Peripheral Pin CLK2 (General)
28CLK1I/OMultiplexed I/O & Peripheral Pin CLK1 (General)
PIN 1 VEE
I/O
Multiplexed I/O & Peripheral Pin VEE (General)
Design note: Signal terminal VEE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VEE. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY100S891JC (PLCC-28(11.5x11.5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY100S891JC (PLCC-28(11.5x11.5)) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY100S891JC (PLCC-28(11.5x11.5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY100S891JC (PLCC-28(11.5x11.5)) - 4. Package Dimensions (D×E×A)
PLCC-28(11.5x11.5) · 11.50×11.50mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY100S891JC (PLCC-28(11.5x11.5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY100S891JC (PLCC-28(11.5x11.5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for SY10EL16VEZC / SY10EL16VEZI / SY100
P2 · p02_fig01EXACT PACKAGE
SY100S891JC (PLCC-28(11.5x11.5)) — 2 | SY100S891 Micrel, Inc. | M9999-032406 hbwhelp@micrel.com or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | 28-Pin PLCC (J28-1) | Ordering Information | Package Operating Package Lead Part Number Type Range Marking Finish | SY100S891JC
2 | SY100S891 Micrel, Inc. | M9999-032406 [email protected] or (408) 955-1690 | PACKAGE/ORDERING INFORMATION | 28-Pin PLCC (J28-1) | Ordering Information | Package Operating Package Lead Part Number Type Range Marking Finish | SY100S891JC
P6 · p06_fig01EXACT PACKAGE
SY100S891JC (PLCC-28(11.5x11.5)) — 6 | SY100S891 Micrel, Inc. | M9999-032406 hbwhelp@micrel.com or (408) 955-1690 | 28-PIN PLCC (J28-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated.
6 | SY100S891 Micrel, Inc. | M9999-032406 [email protected] or (408) 955-1690 | 28-PIN PLCC (J28-1) | Rev. 03 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated.
P1 · p01_fig012038×2810px
SY100S891JC (PLCC-28(11.5x11.5)) — 1 | SY100S891 Micrel, Inc. | M9999-032406 hbwhelp@micrel.com or (408) 955-1690 | Pin Function | BUSEN0-4 Bus Enable Inputs | D0 - D4 Data Inputs | CLK1 Bus Driver Clock Input | CLK2 Receive Register Clock | MR Master Reset | Q0 - Q4 Bus Rec
1 | SY100S891 Micrel, Inc. | M9999-032406 [email protected] or (408) 955-1690 | Pin Function | BUSEN0-4 Bus Enable Inputs | D0 - D4 Data Inputs | CLK1 Bus Driver Clock Input | CLK2 Receive Register Clock | MR Master Reset | Q0 - Q4 Bus Rec
P2 · p02_fig01P2
SY100S891JC (PLCC-28(11.5x11.5)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig012038×2701px
SY100S891JC (PLCC-28(11.5x11.5)) — 3 | SY100S891 Micrel, Inc. | M9999-032406 hbwhelp@micrel.com or (408) 955-1690 | BLOCK DIAGRAM | D0 | BUSEN0 | D R Q C | D1 | BUSEN1 | D R Q C | D2 | BUSEN2 | D R Q C | D3 | BUSEN3 | D R Q C | D4 | BUSEN4 | D R Q C | D R Q C | 25Ω CUTOFF |
3 | SY100S891 Micrel, Inc. | M9999-032406 [email protected] or (408) 955-1690 | BLOCK DIAGRAM | D0 | BUSEN0 | D R Q C | D1 | BUSEN1 | D R Q C | D2 | BUSEN2 | D R Q C | D3 | BUSEN3 | D R Q C | D4 | BUSEN4 | D R Q C | D R Q C | 25Ω CUTOFF |

Technical Specifications & Part Details (SY100S891JC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY100S891JC (PLCC-28(11.5x11.5)) is a 28-pin standard electronic & interconnect component featuring a 11.50 × 11.50 × 1.15 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
11.50 × 11.50 × 1.15 mm (A1=0.03 mm)
Package family: LGA (PLCC-28(11.5x11.5))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PLCC-28(11.5x11.5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
11.50 × 11.50 mm
Height (A) & Pitch (e)IPC-7351B
A=1.15mm · e=1.27mm
Pad Size (W × L)Level B
0.76 × 2.03 mm
Pins / Total PadsTopology
28P / 28Pad (LGA_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PLCC-28(11.5x11.5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY100S891JC (PLCC-28(11.5x11.5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY100S891JC (PLCC-28(11.5x11.5))?

Manufactured by MICROCHIP, the SY100S891JC is housed in a PLCC-28(11.5x11.5) package with 28 pins and a 1.27 mm lead pitch. Key pins include: 1 (VEE: Multiplexed I/O & Peripheral Pin VEE (General)), 2 (D2: Multiplexed I/O & Peripheral Pin D2 (General)), 3 (BUSEN2: Multiplexed I/O & Peripheral Pin BUSEN2 (General)), 4 (D1: Multiplexed I/O & Peripheral Pin D1 (General)), 5 (BUSEN1: Multiplexed I/O & Peripheral Pin BUSEN1 (General)), 6 (D0: Multiplexed I/O & Peripheral Pin D0 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY100S891JC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY100S891JC (PLCC-28(11.5x11.5)) has a nominal body envelope of 11.50 × 11.50 mm, pitch e = 1.27 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY100S891JC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY100S891JC (MICROCHIP, PLCC-28(11.5x11.5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & SY10EL16VEZC / SY10EL16VEZI / SY100 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VEEDigital_IOSignal terminal VEE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VEE. Supported peripheral buses: General.
2D2Digital_IOSignal terminal D2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D2. Supported peripheral buses: General.
3BUSEN2Digital_IOSignal terminal BUSEN2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUSEN2. Supported peripheral buses: General.
4D1Digital_IOSignal terminal D1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D1. Supported peripheral buses: General.
5BUSEN1Digital_IOSignal terminal BUSEN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUSEN1. Supported peripheral buses: General.
6D0Digital_IOSignal terminal D0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D0. Supported peripheral buses: General.
7BUSEN0Digital_IOSignal terminal BUSEN0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUSEN0. Supported peripheral buses: General.
8Q0Digital_IOSignal terminal Q0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
9BUS0Digital_IOSignal terminal BUS0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUS0. Supported peripheral buses: General.
10VCCAPower_InPrimary positive power supply input (VCCA) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
11BUS1Digital_IOSignal terminal BUS1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUS1. Supported peripheral buses: General.
12Q1Digital_IOSignal terminal Q1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
13VCCAPower_InPrimary positive power supply input (VCCA) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
14BUS2Digital_IOSignal terminal BUS2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUS2. Supported peripheral buses: General.
15Q2Digital_IOSignal terminal Q2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q2. Supported peripheral buses: General.
16VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
17BUS3Digital_IOSignal terminal BUS3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUS3. Supported peripheral buses: General.
18Q3Digital_IOSignal terminal Q3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q3. Supported peripheral buses: General.
19VCCAPower_InPrimary positive power supply input (VCCA) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
20BUS4Digital_IOSignal terminal BUS4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUS4. Supported peripheral buses: General.
21Q4Digital_IOSignal terminal Q4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q4. Supported peripheral buses: General.
22BUSEN4Digital_IOSignal terminal BUSEN4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUSEN4. Supported peripheral buses: General.
23D4Digital_IOSignal terminal D4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D4. Supported peripheral buses: General.
24BUSEN3Digital_IOSignal terminal BUSEN3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BUSEN3. Supported peripheral buses: General.
25D3Digital_IOSignal terminal D3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: D3. Supported peripheral buses: General.
26MRDigital_IOSignal terminal MR (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MR. Supported peripheral buses: General.
27CLK2Digital_IOSignal terminal CLK2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CLK2. Supported peripheral buses: General.
28CLK1Digital_IOSignal terminal CLK1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CLK1. Supported peripheral buses: General.