SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SST26VF040A-80E/MF

MICROCHIPWDFN-8-EP(5x6) · 9 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SST26VF040A-80E/MF (WDFN-8-EP(5x6))1WEL2BP03BP14BP25BP39EP8VDD7BPL6RESGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=5.00mm · Pitch e=1.27mmD=6.00mm-4-3-2-101234543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 6.00mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1WELI/OMultiplexed I/O & Peripheral Pin WEL (General)
2BP0I/OMultiplexed I/O & Peripheral Pin BP0 (General)
3BP1I/OMultiplexed I/O & Peripheral Pin BP1 (General)
4BP2I/OMultiplexed I/O & Peripheral Pin BP2 (General)
5BP3I/OMultiplexed I/O & Peripheral Pin BP3 (General)
6RESI/OMultiplexed I/O & Peripheral Pin RES (General)
7BPLI/OMultiplexed I/O & Peripheral Pin BPL (General)
8VDDPowerPower Supply Input (VDD — 2.7V-3.6V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 WEL
I/O
Multiplexed I/O & Peripheral Pin WEL (General)
Design note: 1 = Device is memory write-enabled 0 = Device is not memory write-enabled
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 4. Package Dimensions (D×E×A)
WDFN-8-EP(5x6) · 5.00×6.00mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for SST26VF040A
P1 · p01_fig01376×200px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — 2.5V/3.0V 4-Mbit Serial Quad I/O™ (SQI™) Flash Memory
2.5V/3.0V 4-Mbit Serial Quad I/O™ (SQI™) Flash Memory
P4 · p04_fig01778×410px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — FIGURE 2-1: PIN DESCRIPTIONS
FIGURE 2-1: PIN DESCRIPTIONS
P4 · p04_fig02741×420px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — FIGURE 2-1: PIN DESCRIPTIONS
FIGURE 2-1: PIN DESCRIPTIONS
P48 · p48_fig01357×424px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — 8-Lead SOIC (3.90 mm) Example
8-Lead SOIC (3.90 mm) Example
P48 · p48_fig02357×424px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — 8-Lead SOIC (3.90 mm) Example
8-Lead SOIC (3.90 mm) Example
P48 · p48_fig03307×250px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — 8-Lead WDFN (5x6 mm)
8-Lead WDFN (5x6 mm)
P48 · p48_fig04303×250px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — Example
Example
P48 · p48_fig051377×1031px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) —  2020 Microchip Technology Inc. DS20006292A-page 48
 2020 Microchip Technology Inc. DS20006292A-page 48
P48 · p48_fig03P48
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — Datasheet Page 48 (p48_fig03)
Datasheet Page 48 (p48_fig03)
P50 · p50_fig011292×1479px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
P51 · p51_fig01976×896px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P54 · p54_fig011721×2210px
SST26VF040A-80E/MF (WDFN-8-EP(5x6)) — SST26VF040A
SST26VF040A
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (SST26VF040A-80E/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SST26VF040A-80E/MF (WDFN-8-EP(5x6)) is a 8-pin standard electronic & interconnect component featuring a 6.00 × 5.00 × 0.80 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.7V-3.6V supply operation across -40°C to +85°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V-3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
104 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 5.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (WDFN-8-EP(5x6))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteEPAD 4.00×3.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (WDFN-8-EP(5x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=1.27mm
Pad Size (W × L)Level B
0.50 × 1.20 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
WDFN-8-EP(5x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SST26VF040A-80E/MF (WDFN-8-EP(5x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SST26VF040A-80E/MF (WDFN-8-EP(5x6))?

Manufactured by MICROCHIP, the SST26VF040A-80E/MF is housed in a WDFN-8-EP(5x6) package with 9 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.7V-3.6V. Key pins include: 1 (WEL: Multiplexed I/O & Peripheral Pin WEL (General)), 2 (BP0: Multiplexed I/O & Peripheral Pin BP0 (General)), 3 (BP1: Multiplexed I/O & Peripheral Pin BP1 (General)), 4 (BP2: Multiplexed I/O & Peripheral Pin BP2 (General)), 5 (BP3: Multiplexed I/O & Peripheral Pin BP3 (General)), 6 (RES: Multiplexed I/O & Peripheral Pin RES (General)).

What are the IPC-7351B PCB Footprint dimensions for SST26VF040A-80E/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SST26VF040A-80E/MF (WDFN-8-EP(5x6)) has a nominal body envelope of 5.00 × 6.00 mm, pitch e = 1.27 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 4.00 × 3.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SST26VF040A-80E/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SST26VF040A-80E/MF (MICROCHIP, WDFN-8-EP(5x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & SST26VF040A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1WELDigital_IOSignal terminal WEL (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: WEL. Supported peripheral buses: General.
2BP0Digital_IOSignal terminal BP0 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BP0. Supported peripheral buses: General.
3BP1Digital_IOSignal terminal BP1 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BP1. Supported peripheral buses: General.
4BP2Digital_IOSignal terminal BP2 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BP2. Supported peripheral buses: General.
5BP3Digital_IOSignal terminal BP3 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BP3. Supported peripheral buses: General.
6RESDigital_IOSignal terminal RES (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
7BPLDigital_IOSignal terminal BPL (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BPL. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V-3.6V domain (Max rating: 3.6V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.