SST25WF040BT-40I/NP (USON-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SST25WF040BT-40I/NP

MICROCHIPUSON-8-EP(2x3) · 9 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SST25WF040BT-40I/NP (USON-8-EP(2x3))1WEL2BP013BP114BP215TB19EP8VDD7BPL16RESGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123487659E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1WELI/OMultiplexed I/O & Peripheral Pin WEL (General)
2BP01I/OMultiplexed I/O & Peripheral Pin BP01 (General)
3BP11I/OMultiplexed I/O & Peripheral Pin BP11 (General)
4BP21I/OMultiplexed I/O & Peripheral Pin BP21 (General)
5TB1I/OMultiplexed I/O & Peripheral Pin TB1 (General)
6RESI/OMultiplexed I/O & Peripheral Pin RES (General)
7BPL1I/OMultiplexed I/O & Peripheral Pin BPL1 (General)
8VDDPowerPower Supply Input (VDD — 3.3V / 5.0V Standard Logic)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 WEL
I/O
Multiplexed I/O & Peripheral Pin WEL (General)
Design note: 1 = Device is memory Write enabled 0 = Device is not memory Write enabled
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
USON-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
SST25WF040BT-40I/NP (USON-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for SST25WF040BT
P1 · p01_fig01443×240px
SST25WF040BT-40I/NP (USON-8-EP(2x3)) — 4 Mbit 1.8V SPI Serial Flash
4 Mbit 1.8V SPI Serial Flash
P4 · p04_fig011642×543px
SST25WF040BT-40I/NP (USON-8-EP(2x3)) — FIGURE 2-1: PIN ASSIGNMENTS
FIGURE 2-1: PIN ASSIGNMENTS
P4 · p04_fig01P4
SST25WF040BT-40I/NP (USON-8-EP(2x3)) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P35 · p35_fig011777×2516px
SST25WF040BT-40I/NP (USON-8-EP(2x3)) —  2013-2018 Microchip Technology Inc. DS20005193E-page 35 | Microchip Technology Drawing C04-203C [PRX] Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.c
 2013-2018 Microchip Technology Inc. DS20005193E-page 35 | Microchip Technology Drawing C04-203C [PRX] Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.c
P36 · p36_fig011777×2516px
SST25WF040BT-40I/NP (USON-8-EP(2x3)) —  2013-2018 Microchip Technology Inc. DS20005193E-page 36 | RECOMMENDED LAND PATTERN | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | Y2 | SILK S
 2013-2018 Microchip Technology Inc. DS20005193E-page 36 | RECOMMENDED LAND PATTERN | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | Y2 | SILK S
P36 · p36_fig01P36
SST25WF040BT-40I/NP (USON-8-EP(2x3)) — Datasheet Page 36 (p36_fig01)
Datasheet Page 36 (p36_fig01)

Technical Specifications & Part Details (SST25WF040BT-40I/NP)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SST25WF040BT-40I/NP (USON-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
40MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (USON-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (USON-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.60 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
USON-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SST25WF040BT-40I/NP (USON-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SST25WF040BT-40I/NP (USON-8-EP(2x3))?

Manufactured by MICROCHIP, the SST25WF040BT-40I/NP is housed in a USON-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch. Key pins include: 1 (WEL: Multiplexed I/O & Peripheral Pin WEL (General)), 2 (BP01: Multiplexed I/O & Peripheral Pin BP01 (General)), 3 (BP11: Multiplexed I/O & Peripheral Pin BP11 (General)), 4 (BP21: Multiplexed I/O & Peripheral Pin BP21 (General)), 5 (TB1: Multiplexed I/O & Peripheral Pin TB1 (General)), 6 (RES: Multiplexed I/O & Peripheral Pin RES (General)).

What are the IPC-7351B PCB Footprint dimensions for SST25WF040BT-40I/NP?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SST25WF040BT-40I/NP (USON-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SST25WF040BT-40I/NP?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SST25WF040BT-40I/NP (MICROCHIP, USON-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & SST25WF040BT Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1WELDigital_IOSignal terminal WEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: WEL. Supported peripheral buses: General.
2BP01Digital_IOSignal terminal BP01 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BP01. Supported peripheral buses: General.
3BP11Digital_IOSignal terminal BP11 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BP11. Supported peripheral buses: General.
4BP21Digital_IOSignal terminal BP21 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BP21. Supported peripheral buses: General.
5TB1Digital_IOSignal terminal TB1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TB1. Supported peripheral buses: General.
6RESDigital_IOSignal terminal RES (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
7BPL1Digital_IOSignal terminal BPL1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BPL1. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.