SG2842M (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SG2842M

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SG2842M (PDIP-8)1COM2VFB3ISENSE4RT/CT8VREF7VCC6OUTPUT5GNDGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1COMI/OMultiplexed I/O & Peripheral Pin COM (General)
2VFBI/OMultiplexed I/O & Peripheral Pin VFB (General)
3ISENSEI/OMultiplexed I/O & Peripheral Pin ISENSE (General)
4RT/CTI/OMultiplexed I/O & Peripheral Pin RT/CT (General)
5GNDGNDGround Reference Pin (GND)
6OUTPUTI/OMultiplexed I/O & Peripheral Pin OUTPUT (General)
7VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
8VREFAnalogMultiplexed I/O & Peripheral Pin VREF (General)
PIN 1 COM
I/O
Multiplexed I/O & Peripheral Pin COM (General)
Design note: Signal terminal COM (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COM. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SG2842M (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SG2842M (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SG2842M (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SG2842M (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
SG2842M (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
SG2842M (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for SG2842 / SG1843
P2 · p02_fig01EXACT PACKAGE
SG2842M (PDIP-8) — 2
2
P13 · p13_fig01EXACT PACKAGE
SG2842M (PDIP-8) — Figure 17 · Current Sense Spike Suppression
Figure 17 · Current Sense Spike Suppression
P20 · p20_fig01EXACT PACKAGE
SG2842M (PDIP-8) — Figure 1 · M 8-Pin PDIP Package Dimensions
Figure 1 · M 8-Pin PDIP Package Dimensions
P20 · p20_fig02EXACT PACKAGE
SG2842M (PDIP-8) — Figure 1 · M 8-Pin PDIP Package Dimensions
Figure 1 · M 8-Pin PDIP Package Dimensions
P21 · p21_fig02EXACT PACKAGE
SG2842M (PDIP-8) — Figure 3 · DM 8-Pin SOIC Package Dimensions
Figure 3 · DM 8-Pin SOIC Package Dimensions
P21 · p21_fig03EXACT PACKAGE
SG2842M (PDIP-8) — Figure 3 · DM 8-Pin SOIC Package Dimensions
Figure 3 · DM 8-Pin SOIC Package Dimensions
P21 · p21_fig04EXACT PACKAGE
SG2842M (PDIP-8) — Figure 3 · DM 8-Pin SOIC Package Dimensions
Figure 3 · DM 8-Pin SOIC Package Dimensions
P1 · p01_fig011865×1211px
SG2842M (PDIP-8) — Current Mode PWM Controller
Current Mode PWM Controller
P1 · p01_fig021049×808px
SG2842M (PDIP-8) — Figure 1 · Product Highlight
Figure 1 · Product Highlight
P11 · p11_fig01909×1016px
SG2842M (PDIP-8) — Figure 15 · Oscillator Timing Circuit
Figure 15 · Oscillator Timing Circuit
P13 · p13_fig02713×877px
SG2842M (PDIP-8) — Figure 18 · MOSFET Parasitic Oscillations
Figure 18 · MOSFET Parasitic Oscillations
P13 · p13_fig01P13
SG2842M (PDIP-8) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (SG2842M)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SG2842M (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -55°C to 125°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
500kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.20 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — SG2842 / SG1843 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.20mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SG2842M (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SG2842M (PDIP-8)?

Manufactured by MICROCHIP, the SG2842M is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (COM: Multiplexed I/O & Peripheral Pin COM (General)), 2 (VFB: Multiplexed I/O & Peripheral Pin VFB (General)), 3 (ISENSE: Multiplexed I/O & Peripheral Pin ISENSE (General)), 4 (RT/CT: Multiplexed I/O & Peripheral Pin RT/CT (General)), 5 (GND: Ground Reference Pin (GND)), 6 (OUTPUT: Multiplexed I/O & Peripheral Pin OUTPUT (General)).

What are the IPC-7351B PCB Footprint dimensions for SG2842M?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SG2842M (PDIP-8) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SG2842M?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SG2842M (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & SG2842 / SG1843 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1COMDigital_IOSignal terminal COM (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COM. Supported peripheral buses: General.
2VFBDigital_IOSignal terminal VFB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VFB. Supported peripheral buses: General.
3ISENSEDigital_IOSignal terminal ISENSE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ISENSE. Supported peripheral buses: General.
4RT/CTDigital_IOSignal terminal RT/CT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RT/CT. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6OUTPUTDigital_IOSignal terminal OUTPUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OUTPUT. Supported peripheral buses: General.
7VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8VREFAnalogSignal terminal VREF (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.