PIC18F4480T-I/ML (QFN-44-EP(8x8)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18F4480T-I/ML

MICROCHIPQFN-44-EP(8x8) · 45 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18F4480T-I/ML (QFN-44-EP(8x8))1RC7/RX/DT2RD4/PSP4/ECC3RD5/PSP5/P1B4RD6/PSP6/P1C5VSS6VSS7AVDD8VDD9RB0/INT0/FLT10RB1/INT1/AN811RB2/INT2/CAN12RB3/CANRX13NC14RB4/KBI0/AN915RB5/KBI1/PGM16VSS17VDD18MCLR#/VPP/RE19RA0/AN0/CVRE20RA1/AN121RA2/AN2/VREF22RA3/AN3/VREF23RA4/T0CKI45GND44RC6/TX/CK43RC5/SDO42RC4/SDI/SDA41RD3/PSP3/C2I40RD2/PSP2/C2I39RD1/PSP1/C1I38RD0/PSP0/C1I37RC3/SCK/SCL36RC2/CCP135RC1/T1OSI34RC0/T1OSO/T133OSC2/CLKO/RA32OSC1/CLKI/RA31VSS30AVSS29VDD28AVDD27RE2/CS#/AN7/26RE1/WR#/AN6/25RE0/RD#/AN524RA5/AN4/SS#/Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.835.630.525.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4-30.5-35.6mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233343536373839404142434445E=8.00mm · Pitch e=0.65mmD=8.00mm-6-5-4-3-2-101234566543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 8.00mm × 8.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (45/45)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RC7/RX/DTI/OMultiplexed I/O & Peripheral Pin RC7/RX/DT (General)
2RD4/PSP4/ECCP1/P1AI/OMultiplexed I/O & Peripheral Pin RD4/PSP4/ECCP1/P1A (General)
3RD5/PSP5/P1BI/OMultiplexed I/O & Peripheral Pin RD5/PSP5/P1B (General)
4RD6/PSP6/P1CI/OMultiplexed I/O & Peripheral Pin RD6/PSP6/P1C (General)
5VSSGNDGround Reference Pin (VSS)
6VSSGNDGround Reference Pin (VSS)
7AVDDPowerPower Supply Input (AVDD — 2.0V to 5.5V)
8VDDPowerPower Supply Input (VDD — 2.0V to 5.5V)
9RB0/INT0/FLT0/AN10I/OMultiplexed I/O & Peripheral Pin RB0/INT0/FLT0/AN10 (General)
10RB1/INT1/AN8I/OMultiplexed I/O & Peripheral Pin RB1/INT1/AN8 (General)
11RB2/INT2/CANTXI/OMultiplexed I/O & Peripheral Pin RB2/INT2/CANTX (CAN)
12RB3/CANRXI/OMultiplexed I/O & Peripheral Pin RB3/CANRX (CAN)
13NCI/OMultiplexed I/O & Peripheral Pin NC (General)
14RB4/KBI0/AN9I/OMultiplexed I/O & Peripheral Pin RB4/KBI0/AN9 (General)
15RB5/KBI1/PGMI/OMultiplexed I/O & Peripheral Pin RB5/KBI1/PGM (General)
16VSSGNDGround Reference Pin (VSS)
17VDDPowerPower Supply Input (VDD — 2.0V to 5.5V)
18MCLR#/VPP/RE3I/OMultiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)
19RA0/AN0/CVREFAnalogMultiplexed I/O & Peripheral Pin RA0/AN0/CVREF (General)
20RA1/AN1I/OMultiplexed I/O & Peripheral Pin RA1/AN1 (General)
21RA2/AN2/VREF-AnalogMultiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)
22RA3/AN3/VREF+AnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)
23RA4/T0CKII/OMultiplexed I/O & Peripheral Pin RA4/T0CKI (General)
24RA5/AN4/SS#/HLVDINI/OMultiplexed I/O & Peripheral Pin RA5/AN4/SS#/HLVDIN (General)
25RE0/RD#/AN5I/OMultiplexed I/O & Peripheral Pin RE0/RD#/AN5 (General)
26RE1/WR#/AN6/C1OUTI/OMultiplexed I/O & Peripheral Pin RE1/WR#/AN6/C1OUT (General)
27RE2/CS#/AN7/C2OUTI/OMultiplexed I/O & Peripheral Pin RE2/CS#/AN7/C2OUT (General)
28AVDDPowerPower Supply Input (AVDD — 2.0V to 5.5V)
29VDDPowerPower Supply Input (VDD — 2.0V to 5.5V)
30AVSSGNDGround Reference Pin (AVSS)
31VSSGNDGround Reference Pin (VSS)
32OSC1/CLKI/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
33OSC2/CLKO/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
34RC0/T1OSO/T13CKII/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T13CKI (General)
35RC1/T1OSII/OMultiplexed I/O & Peripheral Pin RC1/T1OSI (General)
36RC2/CCP1I/OMultiplexed I/O & Peripheral Pin RC2/CCP1 (General)
37RC3/SCK/SCLI/OMultiplexed I/O & Peripheral Pin RC3/SCK/SCL (SPI, I2C)
38RD0/PSP0/C1IN+I/OMultiplexed I/O & Peripheral Pin RD0/PSP0/C1IN+ (General)
39RD1/PSP1/C1INI/OMultiplexed I/O & Peripheral Pin RD1/PSP1/C1IN (General)
40RD2/PSP2/C2IN+I/OMultiplexed I/O & Peripheral Pin RD2/PSP2/C2IN+ (General)
41RD3/PSP3/C2INI/OMultiplexed I/O & Peripheral Pin RD3/PSP3/C2IN (General)
42RC4/SDI/SDAI/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
43RC5/SDOI/OMultiplexed I/O & Peripheral Pin RC5/SDO (General)
44RC6/TX/CKI/OMultiplexed I/O & Peripheral Pin RC6/TX/CK (General)
45GNDGNDGround Reference Pin (GND)
PIN 1 RC7/RX/DT
I/O
Multiplexed I/O & Peripheral Pin RC7/RX/DT (General)
Design note: Signal terminal RC7/RX/DT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 2. Standard Pinout (Top View)
True package pinout (45 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 4. Package Dimensions (D×E×A)
QFN-44-EP(8x8) · 8.00×8.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 5. Recommended Land Pattern
IPC-7351B Footprint (45 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18F4480T-I/ML (QFN-44-EP(8x8)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for PIC18F4480T / PIC18F4580 / PIC18F2480
P2 · p02_fig011777×1640px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — DS39637D-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
DS39637D-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
P2 · p02_fig02788×285px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — DS39637D-page 2 © 2009 Microchip Technology Inc.
DS39637D-page 2 © 2009 Microchip Technology Inc.
P171 · p171_fig011537×930px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — FIGURE 16-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 16-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P195 · p195_fig011777×938px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — FIGURE 18-2: SPI MASTER/SLAVE CONNECTION
FIGURE 18-2: SPI MASTER/SLAVE CONNECTION
P198 · p198_fig011777×1060px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — FIGURE 18-5: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 0) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 0) Write to SSPBUF
FIGURE 18-5: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 0) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 0) Write to SSPBUF
P198 · p198_fig021777×1096px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — FIGURE 18-6: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 1) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 1) Write to SSPBUF
FIGURE 18-6: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 1) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 1) Write to SSPBUF
P198 · p198_fig01P198
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — Datasheet Page 198 (p198_fig01)
Datasheet Page 198 (p198_fig01)
P459 · p459_fig021777×817px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — © 2009 Microchip Technology Inc. DS39637D-page 459 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spe
© 2009 Microchip Technology Inc. DS39637D-page 459 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spe
P459 · p459_fig02P459
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — Datasheet Page 459 (p459_fig02)
Datasheet Page 459 (p459_fig02)
P459 · p459_fig01All Packages in PDF
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — 28-Lead SOIC | XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX YYWWNNN | Example | PIC18F2580-E/SO 0910017 | 28-Lead QFN | XXXXXXXX XXXXXXXX YYWWNNN | Example | 18F2580 -I/ML 0910017 | 3 e | 3 e
28-Lead SOIC | XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX YYWWNNN | Example | PIC18F2580-E/SO 0910017 | 28-Lead QFN | XXXXXXXX XXXXXXXX YYWWNNN | Example | 18F2580 -I/ML 0910017 | 3 e | 3 e
P462 · p462_fig011778×2735px
PIC18F4480T-I/ML (QFN-44-EP(8x8)) — PACKAGE_DIMENSIONS — PIC18LF2480-I/SO (SOIC-28-300mil)
PACKAGE_DIMENSIONS — PIC18LF2480-I/SO (SOIC-28-300mil)

Technical Specifications & Part Details (PIC18F4480T-I/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18F4480T-I/ML (QFN-44-EP(8x8)) is a 44-pin standard electronic & interconnect component featuring a 8.00 × 8.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.0V to 5.5V supply operation across -10°C to +70°C with integrated UART, SPI, I2C, ADC, PWM, CAN, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
8.00 × 8.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-44-EP(8x8))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, PWM, CAN, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol45 auto-grouped pins
OK
IPC-7351B Land Pattern45 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 6.55×6.55mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18F4480T / PIC18F4580 / PIC18F2480 (5)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-44-EP(8x8))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
8.00 × 8.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
45P / 45Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-44-EP(8x8)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18F4480T-I/ML (QFN-44-EP(8x8))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18F4480T-I/ML (QFN-44-EP(8x8))?

Manufactured by MICROCHIP, the PIC18F4480T-I/ML is housed in a QFN-44-EP(8x8) package with 45 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.0V to 5.5V. Key pins include: 1 (RC7/RX/DT: Multiplexed I/O & Peripheral Pin RC7/RX/DT (General)), 2 (RD4/PSP4/ECCP1/P1A: Multiplexed I/O & Peripheral Pin RD4/PSP4/ECCP1/P1A (General)), 3 (RD5/PSP5/P1B: Multiplexed I/O & Peripheral Pin RD5/PSP5/P1B (General)), 4 (RD6/PSP6/P1C: Multiplexed I/O & Peripheral Pin RD6/PSP6/P1C (General)), 5 (VSS: Ground Reference Pin (VSS)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for PIC18F4480T-I/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18F4480T-I/ML (QFN-44-EP(8x8)) has a nominal body envelope of 8.00 × 8.00 mm, pitch e = 0.65 mm, and 45 copper pads plus a central exposed thermal pad (EPAD) of 6.55 × 6.55 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18F4480T-I/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18F4480T-I/ML (MICROCHIP, QFN-44-EP(8x8)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (45 pins) & PIC18F4480T / PIC18F4580 / PIC18F2480 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RC7/RX/DTDigital_IOSignal terminal RC7/RX/DT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
2RD4/PSP4/ECCP1/P1ADigital_IOSignal terminal RD4/PSP4/ECCP1/P1A (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD4/PSP4/ECCP1/P1A. Supported peripheral buses: General.
3RD5/PSP5/P1BDigital_IOSignal terminal RD5/PSP5/P1B (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD5/PSP5/P1B. Supported peripheral buses: General.
4RD6/PSP6/P1CDigital_IOSignal terminal RD6/PSP6/P1C (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD6/PSP6/P1C. Supported peripheral buses: General.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7AVDDPower_InPrimary positive power supply input (AVDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
9RB0/INT0/FLT0/AN10Digital_IOSignal terminal RB0/INT0/FLT0/AN10 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB0/INT0/FLT0/AN10. Supported peripheral buses: General.
10RB1/INT1/AN8Digital_IOSignal terminal RB1/INT1/AN8 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB1/INT1/AN8. Supported peripheral buses: General.
11RB2/INT2/CANTXRF_50OhmSignal terminal RB2/INT2/CANTX (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB2/INT2/CANTX. Supported peripheral buses: CAN.
12RB3/CANRXDigital_IOSignal terminal RB3/CANRX (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB3/CANRX. Supported peripheral buses: CAN.
13NCNCSignal terminal NC (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
14RB4/KBI0/AN9Digital_IOSignal terminal RB4/KBI0/AN9 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB4/KBI0/AN9. Supported peripheral buses: General.
15RB5/KBI1/PGMDigital_IOSignal terminal RB5/KBI1/PGM (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB5/KBI1/PGM. Supported peripheral buses: General.
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
18MCLR#/VPP/RE3Digital_IOSignal terminal MCLR#/VPP/RE3 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.
19RA0/AN0/CVREFAnalogSignal terminal RA0/AN0/CVREF (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA0/AN0/CVREF. Supported peripheral buses: General.
20RA1/AN1Digital_IOSignal terminal RA1/AN1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA1/AN1. Supported peripheral buses: General.
21RA2/AN2/VREF-AnalogSignal terminal RA2/AN2/VREF- (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA2/AN2/VREF-. Supported peripheral buses: General.
22RA3/AN3/VREF+AnalogSignal terminal RA3/AN3/VREF+ (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA3/AN3/VREF+. Supported peripheral buses: General.
23RA4/T0CKIDigital_IOSignal terminal RA4/T0CKI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA4/T0CKI. Supported peripheral buses: General.
24RA5/AN4/SS#/HLVDINDigital_IOSignal terminal RA5/AN4/SS#/HLVDIN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA5/AN4/SS#/HLVDIN. Supported peripheral buses: General.
25RE0/RD#/AN5Digital_IOSignal terminal RE0/RD#/AN5 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RE0/RD#/AN5. Supported peripheral buses: General.
26RE1/WR#/AN6/C1OUTDigital_IOSignal terminal RE1/WR#/AN6/C1OUT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RE1/WR#/AN6/C1OUT. Supported peripheral buses: General.
27RE2/CS#/AN7/C2OUTDigital_IOSignal terminal RE2/CS#/AN7/C2OUT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RE2/CS#/AN7/C2OUT. Supported peripheral buses: General.
28AVDDPower_InPrimary positive power supply input (AVDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
29VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
30AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
31VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
32OSC1/CLKI/RA7Digital_IOSignal terminal OSC1/CLKI/RA7 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
33OSC2/CLKO/RA6Digital_IOSignal terminal OSC2/CLKO/RA6 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
34RC0/T1OSO/T13CKIDigital_IOSignal terminal RC0/T1OSO/T13CKI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC0/T1OSO/T13CKI. Supported peripheral buses: General.
35RC1/T1OSIDigital_IOSignal terminal RC1/T1OSI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC1/T1OSI. Supported peripheral buses: General.
36RC2/CCP1Digital_IOSignal terminal RC2/CCP1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC2/CCP1. Supported peripheral buses: General.
37RC3/SCK/SCLDigital_IOSignal terminal RC3/SCK/SCL (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC3/SCK/SCL. Supported peripheral buses: SPI, I2C.
38RD0/PSP0/C1IN+Digital_IOSignal terminal RD0/PSP0/C1IN+ (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD0/PSP0/C1IN+. Supported peripheral buses: General.
39RD1/PSP1/C1INDigital_IOSignal terminal RD1/PSP1/C1IN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD1/PSP1/C1IN. Supported peripheral buses: General.
40RD2/PSP2/C2IN+Digital_IOSignal terminal RD2/PSP2/C2IN+ (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD2/PSP2/C2IN+. Supported peripheral buses: General.
41RD3/PSP3/C2INDigital_IOSignal terminal RD3/PSP3/C2IN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RD3/PSP3/C2IN. Supported peripheral buses: General.
42RC4/SDI/SDADigital_IOSignal terminal RC4/SDI/SDA (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
43RC5/SDODigital_IOSignal terminal RC5/SDO (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
44RC6/TX/CKDigital_IOSignal terminal RC6/TX/CK (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
45GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.