PIC16F785-E/ML (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC16F785-E/ML

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC16F785-E/ML (QFN-20-EP(4x4))1RA3/MCLR#/VP2RC5/CCP13RC4/C2OUT/PH4RC3/AN7/C12I5RC6/AN8/OP1-6RC7/AN9/OP1+7RB7/SYNC8RB69RB5/AN11/OP210RB4/AN10/OP211RC2/AN6/C12I21PCLATH20PCON19RA5/T1CKI/OS18PIE117INTCON16RA0/AN0/C1IN15STATUS14IO1613RC0/AN4/C2IN12RC1/AN5/C12IGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RA3/MCLR#/VPPI/OMultiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)
2RC5/CCP1I/OMultiplexed I/O & Peripheral Pin RC5/CCP1 (General)
3RC4/C2OUT/PH2I/OMultiplexed I/O & Peripheral Pin RC4/C2OUT/PH2 (General)
4RC3/AN7/C12IN3-/OP1I/OMultiplexed I/O & Peripheral Pin RC3/AN7/C12IN3-/OP1 (General)
5RC6/AN8/OP1-I/OMultiplexed I/O & Peripheral Pin RC6/AN8/OP1- (General)
6RC7/AN9/OP1+I/OMultiplexed I/O & Peripheral Pin RC7/AN9/OP1+ (General)
7RB7/SYNCI/OMultiplexed I/O & Peripheral Pin RB7/SYNC (General)
8RB6I/OMultiplexed I/O & Peripheral Pin RB6 (General)
9RB5/AN11/OP2+I/OMultiplexed I/O & Peripheral Pin RB5/AN11/OP2+ (General)
10RB4/AN10/OP2-I/OMultiplexed I/O & Peripheral Pin RB4/AN10/OP2- (General)
11RC2/AN6/C12IN2-/OP2I/OMultiplexed I/O & Peripheral Pin RC2/AN6/C12IN2-/OP2 (General)
12RC1/AN5/C12IN1-/PH1I/OMultiplexed I/O & Peripheral Pin RC1/AN5/C12IN1-/PH1 (General)
13RC0/AN4/C2IN+I/OMultiplexed I/O & Peripheral Pin RC0/AN4/C2IN+ (General)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15STATUSI/OMultiplexed I/O & Peripheral Pin STATUS (General)
16RA0/AN0/C1IN+/ICSPDATI/OMultiplexed I/O & Peripheral Pin RA0/AN0/C1IN+/ICSPDAT (General)
17INTCONI/OMultiplexed I/O & Peripheral Pin INTCON (General)
18PIE1I/OMultiplexed I/O & Peripheral Pin PIE1 (General)
19RA5/T1CKI/OSC1/CLKINI/OMultiplexed I/O & Peripheral Pin RA5/T1CKI/OSC1/CLKIN (RTC/CLK)
20PCONI/OMultiplexed I/O & Peripheral Pin PCON (General)
21PCLATHI/OMultiplexed I/O & Peripheral Pin PCLATH (General)
PIN 1 RA3/MCLR#/VPP
I/O
Multiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)
Design note: Signal terminal RA3/MCLR#/VPP (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RA3/MCLR#/VPP. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC16F785-E/ML (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC16F785-E/ML (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC16F785-E/ML (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC16F785-E/ML (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC16F785-E/ML (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC16F785-E/ML (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for PIC16F785
P2 · p02_fig011777×1640px
PIC16F785-E/ML (QFN-20-EP(4x4)) — DS41249E-page ii © 2008 Microchip Technology Inc. | Trademarks | FilterLab, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporate
DS41249E-page ii © 2008 Microchip Technology Inc. | Trademarks | FilterLab, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporate
P2 · p02_fig02788×285px
PIC16F785-E/ML (QFN-20-EP(4x4)) — DS41249E-page ii © 2008 Microchip Technology Inc.
DS41249E-page ii © 2008 Microchip Technology Inc.
P60 · p60_fig01867×586px
PIC16F785-E/ML (QFN-20-EP(4x4)) — FIGURE 8-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 8-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P60 · p60_fig02867×776px
PIC16F785-E/ML (QFN-20-EP(4x4)) — FIGURE 8-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 8-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P126 · p126_fig011777×1022px
PIC16F785-E/ML (QFN-20-EP(4x4)) — FIGURE 15-10: WAKE-UP FROM SLEEP THROUGH INTERRUPT(1)
FIGURE 15-10: WAKE-UP FROM SLEEP THROUGH INTERRUPT(1)
P126 · p126_fig01P126
PIC16F785-E/ML (QFN-20-EP(4x4)) — Datasheet Page 126 (p126_fig01)
Datasheet Page 126 (p126_fig01)
P128 · p128_fig011777×1285px
PIC16F785-E/ML (QFN-20-EP(4x4)) — Since the regulator uses the band gap voltage as the regulated voltage reference, the VR voltage reference is permanently enabled in the PIC16HV785 device.
Since the regulator uses the band gap voltage as the regulated voltage reference, the VR voltage reference is permanently enabled in the PIC16HV785 device.
P129 · p129_fig011778×1171px
PIC16F785-E/ML (QFN-20-EP(4x4)) — FIGURE 17-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
FIGURE 17-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
P189 · p189_fig01All Packages in PDF
PIC16F785-E/ML (QFN-20-EP(4x4)) — The following sections give the technical details of the packages.
The following sections give the technical details of the packages.
P127 · p127_fig021778×635px
PIC16F785-E/ML (QFN-20-EP(4x4)) — PINOUT_DIAGRAM — PIC16F785-I/P (PDIP-20)
PINOUT_DIAGRAM — PIC16F785-I/P (PDIP-20)
P127 · p127_fig01All Packages in PDF
PIC16F785-E/ML (QFN-20-EP(4x4)) — FIGURE 15-12: 28-PIN ICD PINOUT [PDIP-20]
FIGURE 15-12: 28-PIN ICD PINOUT [PDIP-20]

Technical Specifications & Part Details (PIC16F785-E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC16F785-E/ML (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.0V-5.5V supply operation across 0°C to +125°C with integrated PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V-5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 1.00 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.70×2.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC16F785 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC16F785-E/ML (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC16F785-E/ML (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the PIC16F785-E/ML is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V-5.5V. Key pins include: 1 (RA3/MCLR#/VPP: Multiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)), 2 (RC5/CCP1: Multiplexed I/O & Peripheral Pin RC5/CCP1 (General)), 3 (RC4/C2OUT/PH2: Multiplexed I/O & Peripheral Pin RC4/C2OUT/PH2 (General)), 4 (RC3/AN7/C12IN3-/OP1: Multiplexed I/O & Peripheral Pin RC3/AN7/C12IN3-/OP1 (General)), 5 (RC6/AN8/OP1-: Multiplexed I/O & Peripheral Pin RC6/AN8/OP1- (General)), 6 (RC7/AN9/OP1+: Multiplexed I/O & Peripheral Pin RC7/AN9/OP1+ (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC16F785-E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC16F785-E/ML (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.70 × 2.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC16F785-E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC16F785-E/ML (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & PIC16F785 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RA3/MCLR#/VPPDigital_IOSignal terminal RA3/MCLR#/VPP (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RA3/MCLR#/VPP. Supported peripheral buses: General.
2RC5/CCP1Digital_IOSignal terminal RC5/CCP1 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC5/CCP1. Supported peripheral buses: General.
3RC4/C2OUT/PH2Digital_IOSignal terminal RC4/C2OUT/PH2 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC4/C2OUT/PH2. Supported peripheral buses: General.
4RC3/AN7/C12IN3-/OP1Digital_IOSignal terminal RC3/AN7/C12IN3-/OP1 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC3/AN7/C12IN3-/OP1. Supported peripheral buses: General.
5RC6/AN8/OP1-Digital_IOSignal terminal RC6/AN8/OP1- (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC6/AN8/OP1-. Supported peripheral buses: General.
6RC7/AN9/OP1+Digital_IOSignal terminal RC7/AN9/OP1+ (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC7/AN9/OP1+. Supported peripheral buses: General.
7RB7/SYNCDigital_IOSignal terminal RB7/SYNC (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RB7/SYNC. Supported peripheral buses: General.
8RB6Digital_IOSignal terminal RB6 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RB6. Supported peripheral buses: General.
9RB5/AN11/OP2+Digital_IOSignal terminal RB5/AN11/OP2+ (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RB5/AN11/OP2+. Supported peripheral buses: General.
10RB4/AN10/OP2-Digital_IOSignal terminal RB4/AN10/OP2- (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RB4/AN10/OP2-. Supported peripheral buses: General.
11RC2/AN6/C12IN2-/OP2Digital_IOSignal terminal RC2/AN6/C12IN2-/OP2 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC2/AN6/C12IN2-/OP2. Supported peripheral buses: General.
12RC1/AN5/C12IN1-/PH1Digital_IOSignal terminal RC1/AN5/C12IN1-/PH1 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC1/AN5/C12IN1-/PH1. Supported peripheral buses: General.
13RC0/AN4/C2IN+Digital_IOSignal terminal RC0/AN4/C2IN+ (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RC0/AN4/C2IN+. Supported peripheral buses: General.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15STATUSDigital_IOSignal terminal STATUS (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: STATUS. Supported peripheral buses: General.
16RA0/AN0/C1IN+/ICSPDATDigital_IOSignal terminal RA0/AN0/C1IN+/ICSPDAT (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RA0/AN0/C1IN+/ICSPDAT. Supported peripheral buses: General.
17INTCONDigital_IOSignal terminal INTCON (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: INTCON. Supported peripheral buses: General.
18PIE1Digital_IOSignal terminal PIE1 (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: PIE1. Supported peripheral buses: General.
19RA5/T1CKI/OSC1/CLKINDigital_IOSignal terminal RA5/T1CKI/OSC1/CLKIN (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: RA5/T1CKI/OSC1/CLKIN. Supported peripheral buses: RTC/CLK.
20PCONDigital_IOSignal terminal PCON (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: PCON. Supported peripheral buses: General.
21PCLATHDigital_IOSignal terminal PCLATH (I/O, 2.0V-5.5V domain). Multiplexed alternate functions: PCLATH. Supported peripheral buses: General.