PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC16C65B-04I/L

MICROCHIPPLCC-44(16.6x16.6) · 44 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC16C65B-04I/L (PLCC-44(16.6x16.6))1NC2MCLR#/VPP3RA0/AN04RA1/AN15RA2/AN26RA3/AN3/VREF7RA4/T0CKI8RA5/SS/AN49RE0/RD/AN510RE1/WR/AN611RE2/CS/AN712VDD13VSS14OSC1/CLKIN15OSC2/CLKOUT16RC0/T1OSO/T117NC18RC1/T1OSI/CC19RC2/CCP1620RC3/SCK/SCL21RD0/PSP022RD1/PSP144RB743RB642RB541RB440NC39RB338RB237RB136RB0/INT35VDD34VSS33RD7/PSP732RD6/PSP631RD5/PSP530RD4/PSP429RC7/RX/DT28NC27RC6/TX/CK26RC5/SDO25RC4/SDI/SDA24RD3/PSP323RD2/PSP2Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.833.027.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9-33.0mm
2. 2D FOOTPRINT
6543214443424140393837363534333231302928272625242322212019181716151413121110987E=16.60mm · Pitch e=1.27mmD=16.60mm-14-12-10-8-6-4-20246810121414121086420-2-4-6-8-10-12-14mm
3. 3D CAD MODEL
Package Body: 16.60mm × 16.60mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (44/44)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2MCLR#/VPPI/OMultiplexed I/O & Peripheral Pin MCLR#/VPP (General)
3RA0/AN0I/OMultiplexed I/O & Peripheral Pin RA0/AN0 (General)
4RA1/AN1I/OMultiplexed I/O & Peripheral Pin RA1/AN1 (General)
5RA2/AN2I/OMultiplexed I/O & Peripheral Pin RA2/AN2 (General)
6RA3/AN3/VREFAnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF (General)
7RA4/T0CKII/OMultiplexed I/O & Peripheral Pin RA4/T0CKI (General)
8RA5/SS/AN4I/OMultiplexed I/O & Peripheral Pin RA5/SS/AN4 (General)
9RE0/RD/AN5I/OMultiplexed I/O & Peripheral Pin RE0/RD/AN5 (General)
10RE1/WR/AN6I/OMultiplexed I/O & Peripheral Pin RE1/WR/AN6 (General)
11RE2/CS/AN7I/OMultiplexed I/O & Peripheral Pin RE2/CS/AN7 (General)
12VDDPowerPower Supply Input (VDD — 2.5V to 5.5V)
13VSSGNDGround Reference Pin (VSS)
14OSC1/CLKINI/OMultiplexed I/O & Peripheral Pin OSC1/CLKIN (RTC/CLK)
15OSC2/CLKOUTI/OMultiplexed I/O & Peripheral Pin OSC2/CLKOUT (RTC/CLK)
16RC0/T1OSO/T1CKII/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T1CKI (General)
17NCI/OMultiplexed I/O & Peripheral Pin NC (General)
18RC1/T1OSI/CCP2I/OMultiplexed I/O & Peripheral Pin RC1/T1OSI/CCP2 (General)
19RC2/CCP16I/OMultiplexed I/O & Peripheral Pin RC2/CCP16 (General)
20RC3/SCK/SCLI/OMultiplexed I/O & Peripheral Pin RC3/SCK/SCL (SPI, I2C)
21RD0/PSP0I/OMultiplexed I/O & Peripheral Pin RD0/PSP0 (General)
22RD1/PSP1I/OMultiplexed I/O & Peripheral Pin RD1/PSP1 (General)
23RD2/PSP2I/OMultiplexed I/O & Peripheral Pin RD2/PSP2 (General)
24RD3/PSP3I/OMultiplexed I/O & Peripheral Pin RD3/PSP3 (General)
25RC4/SDI/SDAI/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
26RC5/SDOI/OMultiplexed I/O & Peripheral Pin RC5/SDO (General)
27RC6/TX/CKI/OMultiplexed I/O & Peripheral Pin RC6/TX/CK (General)
28NCI/OMultiplexed I/O & Peripheral Pin NC (General)
29RC7/RX/DTI/OMultiplexed I/O & Peripheral Pin RC7/RX/DT (General)
30RD4/PSP4I/OMultiplexed I/O & Peripheral Pin RD4/PSP4 (General)
31RD5/PSP5I/OMultiplexed I/O & Peripheral Pin RD5/PSP5 (General)
32RD6/PSP6I/OMultiplexed I/O & Peripheral Pin RD6/PSP6 (General)
33RD7/PSP7I/OMultiplexed I/O & Peripheral Pin RD7/PSP7 (General)
34VSSGNDGround Reference Pin (VSS)
35VDDPowerPower Supply Input (VDD — 2.5V to 5.5V)
36RB0/INTI/OMultiplexed I/O & Peripheral Pin RB0/INT (General)
37RB1I/OMultiplexed I/O & Peripheral Pin RB1 (General)
38RB2I/OMultiplexed I/O & Peripheral Pin RB2 (General)
39RB3I/OMultiplexed I/O & Peripheral Pin RB3 (General)
40NCI/OMultiplexed I/O & Peripheral Pin NC (General)
41RB4I/OMultiplexed I/O & Peripheral Pin RB4 (General)
42RB5I/OMultiplexed I/O & Peripheral Pin RB5 (General)
43RB6I/OMultiplexed I/O & Peripheral Pin RB6 (General)
44RB7I/OMultiplexed I/O & Peripheral Pin RB7 (General)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: These pins are not internally connected. These pins should be left unconnected.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 2. Standard Pinout (Top View)
True package pinout (44 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 4. Package Dimensions (D×E×A)
PLCC-44(16.6x16.6) · 16.60×16.60mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (44 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for PIC16C65B / PIC16C73B
P1 · p01_fig02869×378px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) —  1998-2013 Microchip Technology Inc. DS30605D-page 1
 1998-2013 Microchip Technology Inc. DS30605D-page 1
P2 · p02_fig011390×1328px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — PIC16C63A/65B/73B/74B
PIC16C63A/65B/73B/74B
P51 · p51_fig011753×571px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — FIGURE 9-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 9-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P52 · p52_fig011473×793px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — FIGURE 9-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 9-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P52 · p52_fig02867×908px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — FIGURE 9-3: SIMPLIFIED PWM BLOCK DIAGRAM
FIGURE 9-3: SIMPLIFIED PWM BLOCK DIAGRAM
P98 · p98_fig011777×851px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — FIGURE 13-7: WAKE-UP FROM SLEEP THROUGH INTERRUPT
FIGURE 13-7: WAKE-UP FROM SLEEP THROUGH INTERRUPT
P98 · p98_fig021777×916px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — FIGURE 13-8: TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION
FIGURE 13-8: TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION
P98 · p98_fig02P98
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — Datasheet Page 98 (p98_fig02)
Datasheet Page 98 (p98_fig02)
P162 · p162_fig011441×1778px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — * Controlling Parameter | Notes: Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Equivalent: MS-022 Drawing No. C04-071 | B | D1 | E | CH | 15 10 5 15
* Controlling Parameter | Notes: Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Equivalent: MS-022 Drawing No. C04-071 | B | D1 | E | CH | 15 10 5 15
P163 · p163_fig011442×1814px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — CH2 x 45 CH1 x 45 | 10 5 0 10 5 0  Mold Draft Angle Bottom 10 5 0 10 5 0  Mold Draft Angle Top 0.53 0.51 0.33 .021 .020 .013 B 0.81 0.74 0.66 .032 .029 .026 B1 Upper Lead Width 0.33 0.27 0.20 .013 .011 .008 c Lead Thickness | 11 11 n1 P
CH2 x 45 CH1 x 45 | 10 5 0 10 5 0  Mold Draft Angle Bottom 10 5 0 10 5 0  Mold Draft Angle Top 0.53 0.51 0.33 .021 .020 .013 B 0.81 0.74 0.66 .032 .029 .026 B1 Upper Lead Width 0.33 0.27 0.20 .013 .011 .008 c Lead Thickness | 11 11 n1 P
P1 · p01_fig01All Packages in PDF
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — • Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) • Parallel Slave Port (PSP), 8-bits wide with external RD, WR and CS controls • Brown-out detection circuitry for Brown-out Reset (BOR) | Pin Diagram: | PDIP, Windowed CE
• Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) • Parallel Slave Port (PSP), 8-bits wide with external RD, WR and CS controls • Brown-out detection circuitry for Brown-out Reset (BOR) | Pin Diagram: | PDIP, Windowed CE
P156 · p156_fig011441×1797px
PIC16C65B-04I/L (PLCC-44(16.6x16.6)) — PACKAGE_DIMENSIONS — PIC16C73B-20I/SO (SOIC-28-300mil)
PACKAGE_DIMENSIONS — PIC16C73B-20I/SO (SOIC-28-300mil)
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (PIC16C65B-04I/L)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC16C65B-04I/L (PLCC-44(16.6x16.6)) is a 44-pin standard electronic & interconnect component featuring a 16.60 × 16.60 × 1.15 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.5V to 5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
16.60 × 16.60 × 1.15 mm (A1=0.03 mm)
Package family: LGA (PLCC-44(16.6x16.6))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol44 auto-grouped pins
OK
IPC-7351B Land Pattern44 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC16C65B / PIC16C73B (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PLCC-44(16.6x16.6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
16.60 × 16.60 mm
Height (A) & Pitch (e)IPC-7351B
A=1.15mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 2.30 mm
Pins / Total PadsTopology
44P / 44Pad (LGA_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PLCC-44(16.6x16.6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC16C65B-04I/L (PLCC-44(16.6x16.6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC16C65B-04I/L (PLCC-44(16.6x16.6))?

Manufactured by MICROCHIP, the PIC16C65B-04I/L is housed in a PLCC-44(16.6x16.6) package with 44 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (MCLR#/VPP: Multiplexed I/O & Peripheral Pin MCLR#/VPP (General)), 3 (RA0/AN0: Multiplexed I/O & Peripheral Pin RA0/AN0 (General)), 4 (RA1/AN1: Multiplexed I/O & Peripheral Pin RA1/AN1 (General)), 5 (RA2/AN2: Multiplexed I/O & Peripheral Pin RA2/AN2 (General)), 6 (RA3/AN3/VREF: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC16C65B-04I/L?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC16C65B-04I/L (PLCC-44(16.6x16.6)) has a nominal body envelope of 16.60 × 16.60 mm, pitch e = 1.27 mm, and 44 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC16C65B-04I/L?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC16C65B-04I/L (MICROCHIP, PLCC-44(16.6x16.6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (44 pins) & PIC16C65B / PIC16C73B Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2MCLR#/VPPDigital_IOSignal terminal MCLR#/VPP (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: MCLR#/VPP. Supported peripheral buses: General.
3RA0/AN0Digital_IOSignal terminal RA0/AN0 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RA0/AN0. Supported peripheral buses: General.
4RA1/AN1Digital_IOSignal terminal RA1/AN1 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RA1/AN1. Supported peripheral buses: General.
5RA2/AN2Digital_IOSignal terminal RA2/AN2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RA2/AN2. Supported peripheral buses: General.
6RA3/AN3/VREFAnalogSignal terminal RA3/AN3/VREF (Analog, 2.5V to 5.5V domain). Multiplexed alternate functions: RA3/AN3/VREF. Supported peripheral buses: General.
7RA4/T0CKIDigital_IOSignal terminal RA4/T0CKI (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RA4/T0CKI. Supported peripheral buses: General.
8RA5/SS/AN4Digital_IOSignal terminal RA5/SS/AN4 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RA5/SS/AN4. Supported peripheral buses: General.
9RE0/RD/AN5Digital_IOSignal terminal RE0/RD/AN5 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RE0/RD/AN5. Supported peripheral buses: General.
10RE1/WR/AN6Digital_IOSignal terminal RE1/WR/AN6 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RE1/WR/AN6. Supported peripheral buses: General.
11RE2/CS/AN7Digital_IOSignal terminal RE2/CS/AN7 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RE2/CS/AN7. Supported peripheral buses: General.
12VDDPower_InPrimary positive power supply input (VDD) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
13VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
14OSC1/CLKINDigital_IOSignal terminal OSC1/CLKIN (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKIN. Supported peripheral buses: RTC/CLK.
15OSC2/CLKOUTDigital_IOSignal terminal OSC2/CLKOUT (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKOUT. Supported peripheral buses: RTC/CLK.
16RC0/T1OSO/T1CKIDigital_IOSignal terminal RC0/T1OSO/T1CKI (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC0/T1OSO/T1CKI. Supported peripheral buses: General.
17NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
18RC1/T1OSI/CCP2Digital_IOSignal terminal RC1/T1OSI/CCP2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC1/T1OSI/CCP2. Supported peripheral buses: General.
19RC2/CCP16Digital_IOSignal terminal RC2/CCP16 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC2/CCP16. Supported peripheral buses: General.
20RC3/SCK/SCLDigital_IOSignal terminal RC3/SCK/SCL (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC3/SCK/SCL. Supported peripheral buses: SPI, I2C.
21RD0/PSP0Digital_IOSignal terminal RD0/PSP0 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD0/PSP0. Supported peripheral buses: General.
22RD1/PSP1Digital_IOSignal terminal RD1/PSP1 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD1/PSP1. Supported peripheral buses: General.
23RD2/PSP2Digital_IOSignal terminal RD2/PSP2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD2/PSP2. Supported peripheral buses: General.
24RD3/PSP3Digital_IOSignal terminal RD3/PSP3 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD3/PSP3. Supported peripheral buses: General.
25RC4/SDI/SDADigital_IOSignal terminal RC4/SDI/SDA (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
26RC5/SDODigital_IOSignal terminal RC5/SDO (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
27RC6/TX/CKDigital_IOSignal terminal RC6/TX/CK (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
28NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
29RC7/RX/DTDigital_IOSignal terminal RC7/RX/DT (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
30RD4/PSP4Digital_IOSignal terminal RD4/PSP4 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD4/PSP4. Supported peripheral buses: General.
31RD5/PSP5Digital_IOSignal terminal RD5/PSP5 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD5/PSP5. Supported peripheral buses: General.
32RD6/PSP6Digital_IOSignal terminal RD6/PSP6 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD6/PSP6. Supported peripheral buses: General.
33RD7/PSP7Digital_IOSignal terminal RD7/PSP7 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RD7/PSP7. Supported peripheral buses: General.
34VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
35VDDPower_InPrimary positive power supply input (VDD) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
36RB0/INTDigital_IOSignal terminal RB0/INT (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB0/INT. Supported peripheral buses: General.
37RB1Digital_IOSignal terminal RB1 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB1. Supported peripheral buses: General.
38RB2Digital_IOSignal terminal RB2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB2. Supported peripheral buses: General.
39RB3Digital_IOSignal terminal RB3 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB3. Supported peripheral buses: General.
40NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
41RB4Digital_IOSignal terminal RB4 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB4. Supported peripheral buses: General.
42RB5Digital_IOSignal terminal RB5 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB5. Supported peripheral buses: General.
43RB6Digital_IOSignal terminal RB6 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB6. Supported peripheral buses: General.
44RB7Digital_IOSignal terminal RB7 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: RB7. Supported peripheral buses: General.