MTCH112-I/MF (DFN-8-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MTCH112-I/MF

MICROCHIPDFN-8-EP(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MTCH112-I/MF (DFN-8-EP(3x3))1VDD2MTO/INT3MTI04RESET5SDA9EP8VSS7MTI1/ MTGRD06SCLGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=3.00mm · Pitch e=0.65mmD=3.00mm-4-3-2-1012343210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 1.8V to 3.6V)
2MTO/INTI/OMultiplexed I/O & Peripheral Pin MTO/INT (General)
3MTI0I/OMultiplexed I/O & Peripheral Pin MTI0 (General)
4RESETISystem Enable & Hardware Reset (RESET)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7MTI1/ MTGRD0I/OMultiplexed I/O & Peripheral Pin MTI1/ MTGRD0 (General)
8VSSGNDGround Reference Pin (VSS)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VDD
Power
Power Supply Input (VDD — 1.8V to 3.6V)
Design note: Power Supply Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MTCH112-I/MF (DFN-8-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MTCH112-I/MF (DFN-8-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MTCH112-I/MF (DFN-8-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MTCH112-I/MF (DFN-8-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MTCH112-I/MF (DFN-8-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MTCH112-I/MF (DFN-8-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for MTCH112
P1 · p01_fig01376×201px
MTCH112-I/MF (DFN-8-EP(3x3)) — FEATURES
FEATURES
P1 · p01_fig02870×813px
MTCH112-I/MF (DFN-8-EP(3x3)) — FIGURE 1: 8-PIN SOIC, DFN DIAGRAM FOR MTCH112 SOIC, DFN
FIGURE 1: 8-PIN SOIC, DFN DIAGRAM FOR MTCH112 SOIC, DFN
P1 · p01_fig031782×931px
MTCH112-I/MF (DFN-8-EP(3x3)) —  2012 Microchip Technology Inc. Advance Information DS41659A-page 1 | GENERAL DESCRIPTION | TABLE 1: 8-PIN DESCRIPTION | Name 8-Pin SOIC and DFN Description | VDD 1 Power Supply Input | MTO/INT 2 Detect Output (Active-Low) Notification Int
 2012 Microchip Technology Inc. Advance Information DS41659A-page 1 | GENERAL DESCRIPTION | TABLE 1: 8-PIN DESCRIPTION | Name 8-Pin SOIC and DFN Description | VDD 1 Power Supply Input | MTO/INT 2 Detect Output (Active-Low) Notification Int
P1 · p01_fig03P1
MTCH112-I/MF (DFN-8-EP(3x3)) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P5 · p05_fig011824×2637px
MTCH112-I/MF (DFN-8-EP(3x3)) —  2012 Microchip Technology Inc. Advance Information DS41659A-page 5 | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Tec
 2012 Microchip Technology Inc. Advance Information DS41659A-page 5 | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Tec
P6 · p06_fig01452×240px
MTCH112-I/MF (DFN-8-EP(3x3)) — Worldwide Sales and Service
Worldwide Sales and Service

Technical Specifications & Part Details (MTCH112-I/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MTCH112-I/MF (DFN-8-EP(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
16 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×2.30mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.84 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MTCH112-I/MF (DFN-8-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MTCH112-I/MF (DFN-8-EP(3x3))?

Manufactured by MICROCHIP, the MTCH112-I/MF is housed in a DFN-8-EP(3x3) package with 9 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (VDD: Power Supply Input (VDD — 1.8V to 3.6V)), 2 (MTO/INT: Multiplexed I/O & Peripheral Pin MTO/INT (General)), 3 (MTI0: Multiplexed I/O & Peripheral Pin MTI0 (General)), 4 (RESET: System Enable & Hardware Reset (RESET)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for MTCH112-I/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MTCH112-I/MF (DFN-8-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 2.30 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MTCH112-I/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MTCH112-I/MF (MICROCHIP, DFN-8-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MTCH112 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 3.6V domain (Max rating: 3.6V).
2MTO/INTDigital_IOSignal terminal MTO/INT (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: MTO/INT. Supported peripheral buses: General.
3MTI0Digital_IOSignal terminal MTI0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: MTI0. Supported peripheral buses: General.
4RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
5SDADigital_IOSignal terminal SDA (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7MTI1/ MTGRD0Digital_IOSignal terminal MTI1/ MTGRD0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: MTI1/ MTGRD0. Supported peripheral buses: General.
8VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.