MIC74YQS-TR (QSOP-16-150mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC74YQS-TR

MICROCHIPQSOP-16-150mil · 16 Pins · Pitch 0.64mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC74YQS-TR (QSOP-16-150mil)1A0, A1, A22A0, A1, A23A0, A1, A24P0, P1, P2, 5P0, P1, P2, 6P0, P1, P2, 7P0, P1, P2, 8GND16VDD15DATA14CLK13/ALERT12IO711IO610IO59IO4Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
12345678910111213141516E=3.90mm · Pitch e=0.64mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 0.64mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (16/16)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1A0, A1, A2I/OMultiplexed I/O & Peripheral Pin A0, A1, A2 (General)
2A0, A1, A2I/OMultiplexed I/O & Peripheral Pin A0, A1, A2 (General)
3A0, A1, A2I/OMultiplexed I/O & Peripheral Pin A0, A1, A2 (General)
4P0, P1, P2, P3I/OMultiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)
5P0, P1, P2, P3I/OMultiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)
6P0, P1, P2, P3I/OMultiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)
7P0, P1, P2, P3I/OMultiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)
8GNDGNDGround Reference Pin (GND)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13/ALERTI/OMultiplexed I/O & Peripheral Pin /ALERT (General)
14CLKI/OMultiplexed I/O & Peripheral Pin CLK (General)
15DATAI/OMultiplexed I/O & Peripheral Pin DATA (General)
16VDDPowerPower Supply Input (VDD — 2.7V to 3.6V)
PIN 1 A0, A1, A2
I/O
Multiplexed I/O & Peripheral Pin A0, A1, A2 (General)
Design note: Address (input): Client address selection inputs; sets the three least significant bits of the MIC74’s client address.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC74YQS-TR (QSOP-16-150mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC74YQS-TR (QSOP-16-150mil) - 2. Standard Pinout (Top View)
True package pinout (16 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC74YQS-TR (QSOP-16-150mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC74YQS-TR (QSOP-16-150mil) - 4. Package Dimensions (D×E×A)
QSOP-16-150mil · 3.90×4.90mm · Pitch 0.64mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC74YQS-TR (QSOP-16-150mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (16 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC74YQS-TR (QSOP-16-150mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MIC74YQS
P2 · p02_fig01EXACT PACKAGE
MIC74YQS-TR (QSOP-16-150mil) — Typical Application Circuit
Typical Application Circuit
P1 · p01_fig01376×200px
MIC74YQS-TR (QSOP-16-150mil) — 2-Wire Serial I/O Expander and Fan Controller
2-Wire Serial I/O Expander and Fan Controller
P1 · p01_fig02867×844px
MIC74YQS-TR (QSOP-16-150mil) —  2020 Microchip Technology Inc. DS20005969A-page 1
 2020 Microchip Technology Inc. DS20005969A-page 1
P2 · p02_fig021431×908px
MIC74YQS-TR (QSOP-16-150mil) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01P2
MIC74YQS-TR (QSOP-16-150mil) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P7 · p07_fig011678×618px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 2-1: Timing Measurement.
FIGURE 2-1: Timing Measurement.
P15 · p15_fig011777×1132px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 5-1: Acceptable Bit Transfer Conditions. 5.2 Start and Stop Conditions
FIGURE 5-1: Acceptable Bit Transfer Conditions. 5.2 Start and Stop Conditions
P15 · p15_fig021404×392px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 5-3: Serial Byte Format. 5.4 Acknowledge and Not Acknowledge
FIGURE 5-3: Serial Byte Format. 5.4 Acknowledge and Not Acknowledge
P15 · p15_fig03867×430px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 5-3: Serial Byte Format. 5.4 Acknowledge and Not Acknowledge
FIGURE 5-3: Serial Byte Format. 5.4 Acknowledge and Not Acknowledge
P20 · p20_fig011177×573px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 5-12: Fan Speed Control Using an Adjustable Low-Dropout Regulator.
FIGURE 5-12: Fan Speed Control Using an Adjustable Low-Dropout Regulator.
P20 · p20_fig021529×657px
MIC74YQS-TR (QSOP-16-150mil) — FIGURE 5-12: Fan Speed Control Using an Adjustable Low-Dropout Regulator.
FIGURE 5-12: Fan Speed Control Using an Adjustable Low-Dropout Regulator.
P22 · p22_fig011568×1535px
MIC74YQS-TR (QSOP-16-150mil) — MIC74
MIC74
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MIC74YQS-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC74YQS-TR (QSOP-16-150mil) is a 16-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.10 mm mechanical envelope (lead pitch e = 0.64 mm). Rated for 2.7V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
2 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.10 mm (A1=0.10 mm)
Package family: TSSOP (QSOP-16-150mil)
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.64 mm (25.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol16 auto-grouped pins
OK
IPC-7351B Land Pattern16 pads · Pitch 0.64mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QSOP-16-150mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.64mm
Pad Size (W × L)Level B
0.38 × 1.50 mm
Pins / Total PadsTopology
16P / 16Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QSOP-16-150mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC74YQS-TR (QSOP-16-150mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC74YQS-TR (QSOP-16-150mil)?

Manufactured by MICROCHIP, the MIC74YQS-TR is housed in a QSOP-16-150mil package with 16 pins and a 0.64 mm lead pitch, supporting a VCC supply range of 2.7V to 3.6V. Key pins include: 1 (A0, A1, A2: Multiplexed I/O & Peripheral Pin A0, A1, A2 (General)), 2 (A0, A1, A2: Multiplexed I/O & Peripheral Pin A0, A1, A2 (General)), 3 (A0, A1, A2: Multiplexed I/O & Peripheral Pin A0, A1, A2 (General)), 4 (P0, P1, P2, P3: Multiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)), 5 (P0, P1, P2, P3: Multiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)), 6 (P0, P1, P2, P3: Multiplexed I/O & Peripheral Pin P0, P1, P2, P3 (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC74YQS-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC74YQS-TR (QSOP-16-150mil) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 0.64 mm, and 16 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC74YQS-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC74YQS-TR (MICROCHIP, QSOP-16-150mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (16 pins) & MIC74YQS Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1A0, A1, A2Digital_IOSignal terminal A0, A1, A2 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: A0, A1, A2. Supported peripheral buses: General.
2A0, A1, A2Digital_IOSignal terminal A0, A1, A2 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: A0, A1, A2. Supported peripheral buses: General.
3A0, A1, A2Digital_IOSignal terminal A0, A1, A2 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: A0, A1, A2. Supported peripheral buses: General.
4P0, P1, P2, P3Digital_IOSignal terminal P0, P1, P2, P3 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: P0, P1, P2, P3. Supported peripheral buses: General.
5P0, P1, P2, P3Digital_IOSignal terminal P0, P1, P2, P3 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: P0, P1, P2, P3. Supported peripheral buses: General.
6P0, P1, P2, P3Digital_IOSignal terminal P0, P1, P2, P3 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: P0, P1, P2, P3. Supported peripheral buses: General.
7P0, P1, P2, P3Digital_IOSignal terminal P0, P1, P2, P3 (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: P0, P1, P2, P3. Supported peripheral buses: General.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13/ALERTOpen_DrainSignal terminal /ALERT (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: /ALERT. Supported peripheral buses: General.
14CLKDigital_IOSignal terminal CLK (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: CLK. Supported peripheral buses: General.
15DATAOpen_DrainSignal terminal DATA (I/O, 2.7V to 3.6V domain). Multiplexed alternate functions: DATA. Supported peripheral buses: General.
16VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 3.6V domain (Max rating: 3.6V).